Abstract
Raku kiln has a variety of design since it can be constructed manually using a material that can withstand high temperature. This particular firing proposes a different method of applying the combustible material to the fired product which takes place inside the kiln rather than outside where the fired products are maintained at a standstill position throughout the whole firing process. Therefore the problem of statement would be the kiln’s characteristics to resist post-firing reduction particularly during the insertion of combustible material into the kiln. This experimentation was conducted to test on a fibre wall raku kiln’s capability to perform reduction within the kiln in order to achieve a standardized bronze colour effect of the glaze as a more economic way. In this research, the fibre wall raku kiln was tested to identify its capability to assist with reduction within the kiln itself.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Andrews, T. (2005). Raku: Second edition (pp. 52–67). London: KP Books/A&C Black.
Vermol, V. V., Kamsah, K., Hassan, O. H., & Anwar, R. (2011). A study on porcelain anti slip tile design. In 2011 IEEE Colloquium on Humanities, Science and Engineering Research (CHUSER), pp. 121–124.
Noordin, S., Hussain, N. A., Anwar, R., Hassan, O. H., & Khalid, M. F. (2013, April). Discovered aesthetic elements of bubbles inspiring ceramics art form. Business Engineering and Industrial Applications Colloquium (BEIAC). Langkawi, pp. 761–763.
Stos-Gale, Z., Gale, N. H., Houghton, J., & Speakman, R. (2007). Lead isotope data from the isotrace laboratory. Oxford: Archameometry Data Base 1, Ores from the Werstern Mediterranean, Archaeometry, Volume 37, Issue 2, pp. 407–415.
Noordin, S. N. A., Salleh, M. R., Anwar, R., Hassan, O. H., & Kamarun, H. R. (2012). Hypothetical framework for luminescence effect as advanced decoration on Labu Sayong. In 2012 IEEE Symposium on Business, Engineering and Industrial Applications, Bandung, pp. 398–400.
Vance, M. V., Curry, S. C., Bradley, J. M., Kunkel, D. B., Gerkin, R. D., & Bond, G. R. (1990). Acute lead poisoning in nursing home and psychiatric patients from the ingestion of lead-based ceramic glazes. Archives of Internal Medicine, 150(10), 2085.
Burleson, M. (2003). The ceramic glaze handbook: Materials, techniques, formulas. (Rev. Ed., p. 48). New York: Lark Books/Sterling Publishing.
Jalil, A. R., Hassan, O. H., Zainuddin, N. M., & Haron, H. (2014). Innovation of Labu Sayong blackening. Jurnal Teknologi, 63–67.
Anwar, R., Kamarun, H. R., Vermol, V. V., & Hassan, O. H. (2011). Marble dust incorporate in standard local ceramic body as enhancement in sanitary ware products. In 2011 IEEE Colloquium on Humanities, Science and Engineering (CHUSER), Penang, pp. 355–357.
Tanahashi, I., Yoshida, A., & Nishino, A. (1991, January). The effect of heat-treatment on the properties of activated carbon fibre cloth polarizable electrodes. Journal of Applied Electrochemistry, 21(1), 28–31.
Branfman, S. (2012). Mastering Raku: Making ware, glazes, building kilns, firing. (1st Paperback Ed., pp. 56–58). New York: A Lark Ceramics Book.
Anwar, R., Hassan, O. H., & Abidin, S. Z. (2015). A framework of empirical study through design practice for industrial ceramic sanitary ware design. In O. H. Hassan, S. Z. Abidin, R. Legino, R. Anwar, & M. F. Kamaruzaman (Eds.), International Colloquium of Art and Design Education Research (iCADER2014), Singapore: Springer.
Acknowledgement
We would like to acknowledge the generous participation of the interaction designers in the research. This study was conducted in Formgiving Design Research Lab established by the Research Management Institute, Universiti Teknologi MARA (UiTM). Full appreciation is given to the Malaysian Ministry of Higher Education for the financial support under RAGS grant and Research Excellent Fund Scheme (RIF) provided by UiTM.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media Singapore
About this paper
Cite this paper
Ali, A., Talib, M.T.A.M., Anwar, R., Jalil, A.R., Shibata, M. (2015). Impact of Fibre Wall Raku Kiln Design in Execution of Reduction Firing. In: Hassan, O., Abidin, S., Anwar, R., Kamaruzaman, M. (eds) Proceedings of the International Symposium on Research of Arts, Design and Humanities (ISRADH 2014). Springer, Singapore. https://doi.org/10.1007/978-981-287-530-3_25
Download citation
DOI: https://doi.org/10.1007/978-981-287-530-3_25
Publisher Name: Springer, Singapore
Print ISBN: 978-981-287-529-7
Online ISBN: 978-981-287-530-3
eBook Packages: Humanities, Social Sciences and LawEducation (R0)