Advertisement

Floating Oil Storage Base

Chapter
Part of the Ocean Engineering & Oceanography book series (OEO, volume 3)

Abstract

A floating oil storage system has been adopted at two bases, Kamigoto and Shirashima, Japan. Each floating oil storage base holds in reserve approximately 5 million kilolitres of crude oil in steel-made storage reservoirs measuring about 400 m in length, 100 m in width, and 30 m in depth. In this chapter, an outline of those bases, design concept and conditions, mooring system in special fender characteristics, wind and wave conditions and the motions of floating structures, the numerical simulation and factors considered are described. The design standard for oil storage base as established by the Ministry of Transportation is briefly introduced as well as protective facilities and ancillary facilities.

Keywords

Wave Force Mooring Line Mooring System Seismic Force Floating Structure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Bretshneider, C. L. (1968). Significant waves and wave spectrum. (Fundamental of Ocean engineering-Part 7), Ocean Industry, pp.40–46.Google Scholar
  2. Davenport, A. G. (1967). Gust loading factors. In Proceedings of the ASCE, ET3 (pp. 11–34).Google Scholar
  3. Goda, Y. (1987). Statistical variability of sea state parameters as a function of wave spectrum. Coastal Engineering in Japan, JSCE, 34, pp.39–52.Google Scholar
  4. Hino, M. (1976). Relationship between the instantaneous peak values and the evaluation time—A theory on the gust factor. In Proceedings of the JSCE, No.177, (pp. 23–33).Google Scholar
  5. The Japan Port & Harbour Association. (1999). Technical Standards and Commentaries for Port and Harbour Facilities, Japan.Google Scholar
  6. Mitsuyasu, H. (1970). Wind wave generation and their spectrum-wind wave spectrum in finite fetch length. Coastal Engineering in Japan, JSCE, 17, 39–52.Google Scholar
  7. Ueda, S. et al. (1998). Properties of rubber fender in use of mooring for floating bridge. In: 14th Ocean Engineering Symposium, The Society of Naval Architect of Japan, pp. 359–364.Google Scholar

Copyright information

© Springer Science+Business Media Singapore 2015

Authors and Affiliations

  1. 1.Institute of Environment InformaticsYokohamaJapan

Personalised recommendations