Abstract
The last few decades have witnessed three major phases or paradigm shifts of industrial production in the modern world (Womack et al. 1990; Smith 1992). These phases are generally concluded as craft production, mass production and lean production. Shook (1998) highlighted that the concepts such as mass production and lean production reflect ways of thinking about production within particular cultures and eras rather than simply focus on production systems. Moreover, these production paradigms can be related easily to the automobile manufacturing factories, where they are created, exercised and eventually evaluated to the next phase. The first part of this chapter provides a history of evolution of production practices and philosophies through the automobile manufacturing industry from the craft production era to current lean production. The differences in production philosophies, their limits, and their impacts in the construction industry are also reviewed. The second part of this chapter attempts to answer the following question: Can the success of lean principles be replicated in the construction industry? A number of scholars hold positive attitudes towards this proposition (including Koskela 1992, 2000; Ballard 2000). To address this issue, it starts with brief discussion of the peculiarities of construction that differentiate that industry from manufacturing industry. The following discussion covers the terminology of lean construction, along with its principles, tools, and implementation frameworks, as well as criticisms of it. It also sheds light on governments’ roles in promoting lean construction in Western countries and outlines a few cases of lean practices that have emerged in developing countries.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abduh, M., & Roza, H. A. (2006). Indonesian contractors’ readiness towards lean construction. Proceedings of the 14th Annual Conference of the International Group for Lean Construction (IGLC-14), Santiago.
Agbulos, A., Mohamed, Y., Al-hussein, M., Abourizk, S., & Roesch, J. (2006). Application of lean concepts and simulation analysis to improve efficiency of drainage operations maintenance crews. Journal of Construction Engineering and Management, 132(3), 291–299.
Alex, D. P., Fernando, S., Al-Hussein, M., & Kung, D. (2008). Application of lean thinking to improve the productivity of water and sewer service installations. Canadian Journal of Civil Engineering, 35(4), 418–430.
Alinaitwe, H. M. (2009). Prioritizing lean construction barriers in Uganda’s construction industry. Journal of Construction in Developing Countries, 14(1), 15–30.
Balfour Beatty. (2011). Balfour Beatty updates, issue two 2011. Available at: http://www.balfourbeatty.com/files/publications/2011/BB_update_issue2_2011.pdf. Accessed December 27, 2012.
Ball, M. (1988). Rebuilding construction: Economic change and the British construction industry. London: Routledge.
Ballard, G. (2000). The last planner system of production control (p. 198) (unpublished PhD thesis). Department of Civil Engineering, University of Birmingham, Birmingham.
Ballard, G., & Howell, G. (1998). Shielding production: An essential step in production control. Journal of Construction Engineering in Management, 124(1), 18–24.
Ballard, G., & Zabelle, T. R. (2000). Lean design: Process, tools, and techniques. Lean Construction Institute White Paper No. 10, Lean Construction Institute, Ketchum, ID.
Bossink, B. A. G., & Brouwers, H. J. H. (1996). Construction waste: Quantification and source evaluation. Journal of Construction Engineering and Management, 122(1), 55–60.
Bryde, D. J., & Schulmeister, R. (2012). Applying Lean principles to a building refurbishment project: Experiences of key stakeholders. Construction Management and Economics, 30(9), 777–794.
Cho, S., & Ballard, G. (2011). Last planner and integrated project delivery. Lean Construction Journal, 2011(issue), 67–78.
Crowly, A. (1998). Construction as a manufacturing process: Lessons from the automotive industry. Computers and Structures, 67(5), 389–400.
Dentz, J., Nahmens, I., & Mullens, M. (2009). Applying lean production in factory homebuilding. A Journal of Policy Development and Research, 11(1), 81–104.
Diekmann, J. E., Krewedl, M., Balonick, J., Stewart, T., & Won, S. (2004). Application of lean manufacturing principles to construction. Austin, TX: The University of Texas at Austin.
Druker, J., White, G., Hegewisch, A., & Mayne, L. (1996). Between hard and soft HRM: Human resource management in the construction industry. Construction Management and Economics, 14(5), 405–416.
Egan, J. (1998). Rethinking construction (the report of the construction task force). London: Department of Environment, Transport and Regions.
Emmitt, S. (2007). Design management for architects. Oxford: Blackwell.
Forbes, L. H., Ahmed, S. M., & Barcala, M. (2002). Adapting lean construction theory for practical application in developing countries (pp. 219–227). Proceedings of the 1st CIB W107 International Conference: Creating a Sustainable Construction Industry in Developing Countries (Eds. Division of Building Technology, CSIR), Stellenbosch, South Africa, 11–13 November.
Forza, C. (1996). Work organization in lean production and traditional plants what are the differences? International Journal of Operations and Production Management, 16(2), 42–62.
Green, S. D. (1999). The missing arguments of lean construction. Construction Management and Economic, 17, 133–137.
Green, S. D. (2002). The human resource management implications of lean construction: Critical perspectives and conceptual chasms. Journal of Construction Research, 3(1), 147–166.
Green, S. D., & May, S. C. (2005). Lean construction: Arenas of enactment, models of diffusion and the meaning of “leanness”. Building Research and Information, 33(6), 498–511.
Hines, P., Holweg, M., & Rich, N. (2004). Learning to evolve: A review of contemporary lean thinking. International Journal of Operations and Production Management, 24(10), 994–1011.
Höök, M., & Stehn, L. (2008). Applicability of lean principles and practices in industrialized housing production. Construction Management and Economics, 26(10), 1091–1100.
Hormozi, A. M. (2001). Agile manufacturing: The next logical step. Benchmarking: An International Journal, 8(2), 132–143.
Imai, M. (1986). Kaizen (Ky’zen): The key to Japan’s competitive success. New York, NY: McGraw Hill.
Johansen, E., & Walter, L. (2007). Lean construction: Prospects for the German construction industry. Lean Construction Journal, 3(1), 19–32.
Jørgensen, B., & Emmitt, S. (2008). Lost in transition: The transfer of lean manufacturing to construction. Engineering, Construction and Architectural Management, 15(4), 383–398.
Karlsson, C., & Åhlström, P. (1996). Assessing changes towards lean production. International Journal of Operations and Production Management, 16(2), 24–41.
Koskela, L. (1992). Application of the new production philosophy to construction (CIFE Technical Report: 72). Stanford University, 75 p.
Koskela, L. (2000). An exploration towards a production theory and its application to construction. Espoo, Finland: Technical Research Centre of Finland.
Koskela, L. (2004). Moving-on – beyond lean thinking. Lean Construction Journal, 1(1), 24–37.
Koskela, L., Howell, G., Ballard, G., & Tommelein, I. (2002). The foundations of lean construction. In B. Hellingsworth, R. Best, & G. de Valence (Eds.), Design and construction: Building in value (pp. 211–226). Amsterdam: Elsevier.
Leonard, D. (2006). Building quality at Veridian Homes. Quality Progress, 39(10), 49–54.
Liker, J. K. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer. New York, NY: McGraw-Hill.
Liu, M., Ballard, G., & Ibbs, W. (2011). Work flow variation and labour productivity: Case study. Journal of Management in Engineering, 27(4), 236–242.
Low, S. P., & Chan, Y. M. (1997). Managing productivity in construction, JIT operations and measurements. Brookfield, VT: Ashgate.
Low, S. P., & Gao, S. (2011a). Bridging Western management theories and Japanese management practices: Case of the Toyota Way model. Emerald Emerging Markets Case Studies, 1(1), 1–20.
Low, S. P., & Gao, S. (2011b). The application of the Just-in-Time philosophy in the Chinese construction industry. Journal of Construction in Developing Countries, 16(1), 91–111.
Maturana, S., Alarcón, L., Gazmuri, P., & Vrsalovic, M. (2007). On-site subcontractor evaluation method based on lean principles and partnering practices. Journal of Management in Engineering, 23(2), 67–74.
Miller, C. J. M., Packham, G. A., & Thomas, B. C. (2002). Harmonization between main contractors and subcontractors: A prerequisite for lean construction. Journal of Construction Research, 3(1), 67–82.
Monden, Y. (1998). Toyota production system (3rd ed.). Norcross, GA: Engineering and Management.
Nahmens, I., Ikuma, L. H., & Khot, D. (2012). Lean and job satisfaction: A case study in industrialized homebuilding. Lean Construction Journal, 2012, 91–104.
Nesan, L. J., & Holt, G. D. (1999). Empowerment in construction: The way forward for performance improvement. Baldock: Research Studies.
Oglesby, C. H., Parker, H. W., & Howell, G. A. (1989). Productivity improvement in construction. New York, NY: McGraw-Hill.
Ohno, T. (1988). Toyota production system: Beyond large-scale production. Cambridge, MA: Productivity Press.
Olatunji, J. O. (2008). Lean in Nigerian construction: State, barriers, strategies and “go-to-gemba” approach. Proceeding of the 16nd Annual Conference of the International Group for Lean construction (IGLC-16), Manchester, United Kingdom, 16–18 July.
Olivella, J., Cuatrecasas, L., & Gavilan, N. (2008). Work organization practices for lean production. Journal of Manufacturing Technology Management, 19(7), 798–811.
Paez, O., Dewees, J., Genaidy, A., Tuncel, S., Karwowski, W., & Zurada, J. (2004). The lean manufacturing enterprise: An emerging socio-technological system integration. Human Factors and Ergonomics in Manufacturing, 14(3), 285–306.
Paez, O., Salem, S., Solomon, J., & Genaidy, A. (2005). Moving from lean manufacturing to lean construction: Toward a common socio-technological framework. Human Factors and Ergonomics in Manufacturing, 15(2), 233–245.
Picchi, F. A., & Granja, A. D. (2004). Construction sites: Using lean principles to seek broader implementations. Proceedings of the 12th Annual Conference of the International Group for Lean Construction (IGLC-12), Helsingør, Denmark, 3–6 August.
Polat, G., & Ballard, G. (2004). Waste in Turkish construction: Need for lean construction. Proceedings of the 12th Annual Conference of the International Group for Lean Construction (IGLC-12), Helsingør, Denmark, 3–6 August.
Ramaswamy, K. P., & Kalidindi, S. N. (2009). Waste in Indian building construction projects. Proceedings of the 17th Annual Conference of the International Group for Lean Construction (IGLC-17), Taiwan, 15–17 July.
Riley, M. J., & Clare-Brown, D. (2001). Comparison of cultures in construction and manufacturing industries. Journal of management in Engineering, 17(3), 149–158.
Sacks, R., & Goldin, M. (2007). Lean management model for construction of high-rise apartment buildings. Journal of construction engineering and Management, 133(5), 374–384.
Salem, O., Solomon, J., Genaidy, A., & Mihkarah, I. (2006). Lean construction: From theory to implementation. Journal of Management in Engineering, 22(4), 168–175.
Sanchez, A. M., & Perez, M. P. (2001). Lean indicators and manufacturing strategies. International Journal of Operations and Production Management, 21(11), 1433–1451.
Santos, A. (1999). Application of fow principles in the production management of construction sites. Unpublished PhD thesis, University of Salford, Salford, UK
Senaratne, S., & Wijesiri, D. (2008). Lean construction as a strategic option: Testing its suitability and acceptability in Sri Lanka. Lean Construction Journal, 2008, 34–48.
Shah, R., & Ward, P. T. (2007). Defining and developing measures of lean production. Journal of Operations Management, 25(4), 785–805.
Shook, J. Y. (1998). Bringing the Toyota production system to the United States: A personal perspective. In J. K. Liker (Ed.), Becoming lean (pp. 41–69). Portland: Productivity Press.
Smith, D. C. (1992). From lean to nimble: Is agile production the next paradigm? Ward’s Auto World, September, 7.
Song, L. G., & Liang, D. A. (2011). Lean construction implementation and its implication on sustainability: A contractors’ case study. Canadian Journal of Civil Engineering, 38(1), 1–10.
Spear, S., & Bowen, H. K. (1999). The DNA of the Toyota production system. Harvard Business Review, 77(5), 97–106.
Sugimori, Y., Kusunoki, K., Cho, F., & Uchikawa, S. (1977). Toyota production system and Kanban system materialization of just-in-time and respect-for-human system. International Journal of Production Research, 15(6), 553–564.
Tapping, D., Luyster, T., & Shuker, T. (2002). Value stream management: Eight steps to planning, mapping, and sustaining lean improvement. New York, NY: Productivity Press.
Tommelein, I. D. (1998). Pull-driven scheduling for pipe-spool installation: Simulation of a lean construction technique. Journal of Construction Engineering Management, 124(4), 279–288.
Turner Construction Company. (2012). Benefits of lean construction. Available at: http://www.turnerconstruction.com/experience/lean/lean-read-more. Accessed December 27, 2012.
Winch, G. M. (2003). Models of manufacturing and the construction process: The genesis of re-engineering construction. Building Research and Information, 31(2), 107–118.
Winch, G. M. (2006). Towards a theory of construction as production by projects. Building Research and Information, 34(2), 154–163.
Winch, G. M. (2010). Managing construction projects: An information processing approach (2nd ed.). Oxford: Blackwell Science.
Womack, J. P., & Jones, D. T. (1996). Lean thinking: Banish waste and create wealth in your corporation. New York, NY: Simon & Schuster.
Womack, J. P., Jones, D. T., & Roos, D. (1990). The machine that changed the world. New York, NY: Rawson Associates.
Yu, H. T., Al-Hussein, M., Al-Jibouri, S., & Telyas, A. (2013). Lean transformation in a modular building company: A case for implementation. Journal of Management in Engineering, 29(1), 103–111.
Yu, H. T., Tweed, T., Al-Hussein, M., & Nasseri, R. (2009). Development of lean model for house construction using value stream mapping. Journal of Construction Engineering and Management, 135(8), 782–790.
Al-Sudairi, A. A. (2007). Evaluating the effect of construction process characteristics to the applicability of lean principles. Construction Innovation: Information, Process, Management, 7(1), 99–121.
Emiliani, M. (2006). Origins of lean management in America: The role of Connecticut businesses. Journal of Management History, 12(2), 167–184.
Bhasin, S., & Burcher, P. (2006). Lean viewed as a lean philosophy. Journal of Manufacturing Technology Management, 17(1), 56–72.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Gao, S., Low, S.P. (2014). From Lean Production to Lean Construction. In: Lean Construction Management. Springer, Singapore. https://doi.org/10.1007/978-981-287-014-8_3
Download citation
DOI: https://doi.org/10.1007/978-981-287-014-8_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-287-013-1
Online ISBN: 978-981-287-014-8
eBook Packages: EngineeringEngineering (R0)