Abstract
In a VAM process, the frequency and amplitude of the tool vibration are closely related to the machined surface of the workpiece. Serious tool wear will cause the quality of the machined surface to decrease, and many other defects will occur.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chawla KK (2012) Metal matrix composites. Composite Materials. Springer, New York, NY, pp 197–248
Chawla N, Shen YL (2001) Mechanical behavior of particle reinforced metal matrix composites. Adv Eng Mater 3(6):357–370
Basavarajappa S, Chandramohan G, Rao KVN et al (2006) Turning of particulate metal matrix composites—review and discussion. Proc Institution of Mech Eng Part B: J Eng Manuf 220(7):1189–1204
El-Gallab M, Sklad M (1998) Machining of Al/SiC particulate metal matrix composites: Part II: Workpiece surface integrity. J Mater Process Technol 83(1–3):277–285
Manna A, Bhattacharayya B (2003) A study on machinability of Al/SiC-MMC. J Mater Process Technol 140(1–3):711–716
Ozben T, Kilickap E, Cakır O (2008) Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. J Mater Process Technol 198(1–3):220–225
Davim J, Paulo Ed (2013) In: Machining composites materials. Wiley
Dabade UA, Joshi SS (2009) Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites. J Mater Process Technol 209(10):4704–4710
Lin CB, Hung YW, Liu WC et al (2001) Machining and fluidity of 356Al/SiC (p) composites. J Mater Process Technol 110(2):152–159
Machining technology for composite materials: principles and practice (2011) Elsevier
Bhushan RK, Kumar S, Das S (2010) Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. Int J Adv Manuf Technol 50(5):459–469
Babitsky VI, Kalashnikov AN, Meadows A et al (2003) Ultrasonically assisted turning of aviation materials. J Mater Process Technol 132(1–3):157–167
Nath C, Rahman M (2008) Effect of machining parameters in ultrasonic vibration cutting. Int J Mach Tools Manuf 48(9):965–974
Zhao B, Liu CS, Zhu XS et al (2002) Research on the vibration cutting performance of particle reinforced metallic matrix composites SiCp/Al. J Mater Process Technol 129(1–3):380–384
Zhong ZW, Lin G (2006) Ultrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles. Int J Adv Manuf Technol 27(11):1077–1081
Smith S, Woody B, Barkman W et al (2009) Temperature control and machine dynamics in chip breaking using CNC toolpaths. CIRP Ann Manuf Technol 58(1):97–100
Kountanya R (2008) Cutting tool temperatures in interrupted cutting—the effect of feed-direction modulation. J Manuf Process 10(2):47–55
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2023 Huazhong University of Science and Technology Press
About this chapter
Cite this chapter
Bai, W., Gao, Y., Sun, R. (2023). Tool Wear in Vibration Assisted Machining. In: Vibration Assisted Machining. Research on Intelligent Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-19-9131-8_9
Download citation
DOI: https://doi.org/10.1007/978-981-19-9131-8_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-9130-1
Online ISBN: 978-981-19-9131-8
eBook Packages: EngineeringEngineering (R0)