Abstract
Vibration assisted cutting (VAC) is a promising process, with various benefits compared to conventional cutting (CC). A wide range of applications demonstrated that it has several advantages such as reduction of the average cutting force, improvement of the cutting stability and surface quality, increase in tool life, etc.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Brehl DE, Dow TA (2008) Review of vibration-assisted machining. Precis Eng 32(3):153–172
Moufki A, Molinari A, Dudzinski D (1998) Modelling of orthogonal cutting with a temperature dependent friction law. J Mech Phys Solids 46(10):2103–2138
Marinov VR (2001) Hybrid analytical–numerical solution for the shear angle in orthogonal metal cutting—part I: theoretical foundation. Int J Mech Sci 43(2):399–414
Bahi S, Nouari M, Moufki A et al (2012) Hybrid modelling of sliding–sticking zones at the tool–chip interface under dry machining and tool wear analysis. Wear 286:45–54
Shamoto E, Altıntas Y (1999) Prediction of shear angle in oblique cutting with maximum shear stress and minimum energy principles. J Manuf Sci Eng, pp 399–407
Oxley PLB, Shaw MC (1990) Mechanics of machining: an analytical approach to assessing machinability. pp 253–253
Wright PK (1982) Predicting the shear plane angle in machining from workmaterial strain-hardening characteristics. J Eng Ind 104:285–293
Lee EH, Shaffer BW (1951) The theory of plasticity applied to a problem of machining. pp 405–413
Merchant ME (1945) Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip. J Appl Phys 16(5): 267–275
Childs THC (2006) Friction modelling in metal cutting. Wear 260(3):310–318
Ozlu E, Budak E, Molinari A (2009) Analytical and experimental investigation of rake contact and friction behavior in metal cutting. Int J Mach Tools Manuf 49(11):865–875
Molinari A, Cheriguene R, Miguélez H (2011) Numerical and analytical modeling of orthogonal cutting: the link between local variables and global contact characteristics. Int J Mech Sci 53(3):183–206
Özel T (2006) The influence of friction models on finite element simulations of machining. Int J Mach Tools Manuf 46(5):518–530
Shao YHJ (1989) The slip line cutting model of ultrasonic vibrating cutting. J. Guangxi Univ (Nat Sci Ed) 4: 24–27
Zhang X, Arif M, Liu K et al (2013) A model to predict the critical undeformed chip thickness in vibration-assisted machining of brittle materials. Int J Mach Tools Manuf 69:57–66
Arefin S, Zhang XQ, Anantharajan SK et al (2019) An analytical model for determining the shear angle in 1D vibration-assisted micro machining. Nanomanuf Metrol 2(4):199–214
Bai W, Sun R, Gao Y et al (2016) Analysis and modeling of force in orthogonal elliptical vibration cutting. Int J Adv Manuf Technol 83(5):1025–1036
Amini S, Kazemiyoun M (2014) Effect of ultrasonic vibrations on chip–tool contact zone in turning of AISI304. Mater Manuf Process 29(5):627–633
Jamshidi H, Nategh MJ (2013) Theoretical and experimental investigation of the frictional behavior of the tool–chip interface in ultrasonic-vibration assisted turning. Int J Mach Tools Manuf 65:1–7
Lotfi M, Amini S (2018) Effect of ultrasonic vibration on frictional behavior of tool–chip interface: finite element analysis and experimental stud. Proc Inst Mech Eng Part B: J Eng Manuf 232(7):1212–1220
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2023 Huazhong University of Science and Technology Press
About this chapter
Cite this chapter
Bai, W., Gao, Y., Sun, R. (2023). Kinematics of Vibration Assisted Cutting. In: Vibration Assisted Machining. Research on Intelligent Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-19-9131-8_3
Download citation
DOI: https://doi.org/10.1007/978-981-19-9131-8_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-9130-1
Online ISBN: 978-981-19-9131-8
eBook Packages: EngineeringEngineering (R0)