Abstract
During the first half of the nineteenth century, manufacturing equipment began to move towards mechanization. The first turning machine tool was built by Maudslay (1771–1831), and the first milling machine tool was invented by Whitney (1765–1825)
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Trent EM, Wright PK (2000) Metal cutting. Butterworth-Heinemann
Lauwers B, Klocke F, Klink A et al (2014) Hybrid processes in manufacturing. CIRP Ann Manuf Technol 63(2):561–583
Tesfay HD (2016) Ultrasonic vibration assisted grinding of bio-ceramic materials: modeling, simulation, and experimental investigations on edge chipping. North Carolina Agricultural and Technical State University
Bai W, Bisht A, Roy A et al (2019) Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining. Int J Adv Manuf Technol 101(5):1143–1156
Balamuth L (1954) Mechanical impedance transformers in relation to ultrasonic machining. J Acoust Soc Am 26(5):934–934
Miller GE (1957) Special theory of ultrasonic machining. J Appl Phys 28(2):149–156
Isaev AI, Anokhin VS (1961) Application of ultrasonic vibrations of the tool during cutting metals. Vestn Mashinostr 5:56–62
Legge P (1964) Ultrasonic drilling of ceramics. Ind Diam Rev 24:20
Skelton RC (1968) Turning with an oscillating tool. Int J Mach Tool Des Res 8(4):239–259
Kremer D, Saleh SM, Ghabrial SR et al (1981) The state of the art of ultrasonic machining. CIRP Ann Manuf Technol 30(1):107–110
Zheng SY (2008) Development of a rotary ultrasonic machine and experimental study of machining on the machine. Huaqiao University, Xiamen
Venkatesh VC (1983) Machining of glass by impact processes. J Mech Work Technol 8(2–3):247–260
Sheppard LM (1987) Machining of advanced ceramics. Adv Mater Process Technol 132(6):40–43
Takeyama H, Iijima N (1988) Machinability of glassfiber reinforced plastics and application of ultrasonic machining. CIRP Ann Manuf Technol 37(1):93–96
Koshimizu S, Iansaki I (1988) Hybrid machining of hard and brittle materials. J Mech Work Technol 17:333–341
Hocheng H, Hsu CC (1995) Preliminary study of ultrasonic drilling of fiber-reinforced plastics. J Mater Process Technol 48(1–4):255–266
Dharmadhikari SW, Sharma CS (1985) Optimization of abrasive life in ultrasonic machining. pp 361–364
Nair EV, Ghosh A (1985) A fundamental approach to the study of the mechanics of ultrasonic machining. Int J Prod Res 23(4): 731–753
Wang ZY, Rajurkar KP (1996) Dynamic analysis of the ultrasonic machining process. pp 376–381
Lee TC, Chan CW (1997) Mechanism of the ultrasonic machining of ceramic composites. J Mater Process Technol 71(2):195–201
Seah KHW, Wong YS, Lee LC (1993) Design of tool holders for ultrasonic machining using FEM. J Mater Process Technol 37(1–4):801–816
Amin SG, Ahmed MHM, Youssef HA (1995) Computer-aided design of acoustic horns for ultrasonic machining using finite-element analysis. J Mater Process Technol 55(3–4):254–260
Komaraiah M, Manan MA, Reddy PN et al (1988) Investigation of surface roughness and accuracy in ultrasonic machining. Precis Eng 10(2):59–65
Komaraiah M, Narasimha RP (1991) Rotary ultrasonic machining—a new cutting process and its performance. Int J Prod Res 29(11):2177–2187
Pei ZJ, Ferreira PM, Kapoor SG et al (1995) Rotary ultrasonic machining for face milling of ceramics. Int J Mach Tools Manuf 35(7):1033–1046
Pei ZJ, Ferreira PM (1998) Modeling of ductile-mode material removal in rotary ultrasonic machining. Int J Mach Tools Manuf 38(10–11):1399–1418
Cunningham B, Li P, Lin B et al (2002) Colorimetric resonant reflection as a direct biochemical assay technique. Sens Actuators, B Chem 81(2–3):316–328
Zhixin J, Jianhua Z, Xing A (1997) Study on a new kind of combined machining technology of ultrasonic machining and electrical discharge machining. Int J Mach Tools Manuf 37(2):193–199
Shamoto E, Moriwaki T (1994) Study on elliptical vibration cutting. CIRP Ann Manuf Technol 43(1):35–38
Shamoto E, Moriwaki T (1999) Ultaprecision diamond cutting of hardened steel by applying elliptical vibration cutting. CIRP Ann Manuf Technol 48(1):441–444
Singh R, Khamba JS (2006) Ultrasonic machining of titanium and its alloys: a review. J Mater Process Technol 173(2):125–135
Kumar J (2013) Ultrasonic machining—a comprehensive review. Mach Sci Technol 17(3):325–379
Xu WX, Zhang LC (2015) Ultrasonic vibration-assisted machining: principle, design and application. Adv Manuf 3(3):173–192
Singh RP, Singhal S (2016) Rotary ultrasonic machining: a review. Mater Manuf Process 31(14):1795–1824
O’Toole L, Kang C, Fang F (2020) Advances in rotary ultrasonic-assisted machining. Nanomanuf Metrol 3(1):1–25
Wang J, Zhang J, Feng P et al (2018) Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review. Ceram Int 44(2):1227–1239
Xu S, Kuriyagawa T, Shimada K et al (2017) Recent advances in ultrasonic-assisted machining for the fabrication of micro/nano-textured surfaces. Front Mech Eng 12(1):33–45
Yang Z, Zhu L, Zhang G et al (2020) Review of ultrasonic vibration-assisted machining in advanced materials. Int J Mach Tools Manuf 156:103594
Ghahramani B, Wang ZY (2001) Precision ultrasonic machining process: a case study of stress analysis of ceramic (Al2O3). Int J Mach Tools Manuf 41(8):1189–1208
Ahmed Y, Cong WL, Stanco MR et al (2012) Rotary ultrasonic machining of alumina dental ceramics: a preliminary experimental study on surface and subsurface damages. J Manuf Sci E T ASME 134(6):064501
Lalchhuanvela H, Doloi B, Bhattacharyya B (2012) Enabling and understanding ultrasonic machining of engineering ceramics using parametric analysis. Mater Manuf Process 27(4):443–448
Nath C, Lim GC, Zheng HY (2012) Influence of the material removal mechanisms on hole integrity in ultrasonic machining of structural ceramics. Ultrasonics 52(5):605–613
Liu JW, Baek DK, Ko TJ (2014) Chipping minimization in drilling ceramic materials with rotary ultrasonic machining. Int J Adv Manuf Technol 72(9):1527–1535
Singh RP, Singhal S (2017) Investigation of machining characteristics in rotary ultrasonic machining of alumina ceramic. Mater Manuf Process 32(3):309–326
Singh RP, Singhal S (2018) An experimental study on rotary ultrasonic machining of macor ceramic. Proc Inst Mech Eng Part B: J Eng Manuf 232(7):1221–1234
Li ZC, Jiao Y, Deines TW et al (2005) Rotary ultrasonic machining of ceramic matrix composites: feasibility study and designed experiments. Int J Mach Tools Manuf 45(12–13):1402–1411
Jianxin D, Taichiu L (2002) Ultrasonic machining of alumina-based ceramic composites. J Eur Ceram Soc 22(8):1235–1241
Guzzo PL, Raslan AA, Shinohara AH et al (2001) Characterization of synthetic quartz crystals grown from cylindrical seeds produced by ultrasonic machining. J Cryst Growth 229(1–4):275–282
Yu Z, Hu X, Rajurkar KP (2006) Influence of debris accumulation on material removal and surface roughness in micro ultrasonic machining of silicon. CIRP Ann Manuf Technol 55(1):201–204
Zhang C, Cong W, Feng P et al (2014) Rotary ultrasonic machining of optical K9 glass using compressed air as coolant: a feasibility study. Proc Inst Mech Eng Part B: J Eng Manuf 228(4):504–514
Lv D, Huang Y, Tang Y et al (2013) Relationship between subsurface damage and surface roughness of glass BK7 in rotary ultrasonic machining and conventional grinding processes. Int J Adv Manuf Technol 67(1):613–622
Singh R, Khamba JS (2007) Investigation for ultrasonic machining of titanium and its alloys. J Mater Process Technol 183(2–3):363–367
Maurotto A, Muhammad R, Roy A et al (2013) Enhanced ultrasonically assisted turning of a β-titanium alloy. Ultrasonics 53(7):1242–1250
Muhammad R, Maurotto A, Demiral M et al (2014) Thermally enhanced ultrasonically assisted machining of Ti alloy. CIRP J Manuf Sci Technol 7(2):159–167
Kumar J, Khamba JS, Mohapatra SK (2008) An investigation into the machining characteristics of titanium using ultrasonic machining. Int J Mach Mach Mater 3(1/2):143
Feng Q, Cong WL, Pei ZJ et al (2012) Rotary ultrasonic machining of carbon fiber-reinforced polymer: feasibility study. Mach Sci Technol 16(3):380–398
Wang H, Ning F, Hu Y et al (2016) Surface grinding of carbon fiber–reinforced plastic composites using rotary ultrasonic machining: effects of tool variables. Adv Mech Eng 8(9):1687814016670284
Wang H, Hu Y, Cong W et al (2019) A mechanistic model on feeding-directional cutting force in surface grinding of CFRP composites using rotary ultrasonic machining with horizontal ultrasonic vibration. Int J Mech Sci 155:450–460
Cong WL, Pei ZJ, Treadwell C (2014) Preliminary study on rotary ultrasonic machining of CFRP/Ti stacks. Ultrasonics 54(6):1594–1602
Kataria R, Kumar J, Pabla BS (2016) Experimental investigation and optimization of machining characteristics in ultrasonic machining of WC–Co composite using GRA method. Mater Manuf Process 31(5):685–693
Ding K, Fu Y, Su H et al (2014) Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining. J Mater Process Technol 214(12):2900–2907
Feng P, Wang J, Zhang J et al (2017) Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites. Ceram Int 43(1):791–799
Wang D, Onawumi PY, Ismail SO et al (2019) Machinability of natural-fibre-reinforced polymer composites: conventional vs ultrasonically-assisted machining. Compos A Appl Sci Manuf 119:188–195
Bai W, Roy A, Sun R et al (2019) Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning. J Mater Process Technol 268:149–161
Heisel U, Eisseler R, Eber R et al (2011) Ultrasonic-assisted machining of stone. Prod Eng Res Devel 5(6):587–594
Mikhailova NV, Onawumi PY, Roy A et al (2018) Ultrasonically assisted drilling of rocks. AIP Conf Proc 1959(1):070024
Fernando P, Zhang M, Pei Z (2018) Rotary ultrasonic machining of rocks: an experimental investigation. Adv Mech Eng 10(3):1687814018763178
Bagavathy S, Kumar PR, Raj PAC et al (2021) Frequency measurement through electric network analyzer for ultrasonic machining of steel. Mater Today: Proc 45:1775–1778
Ya G, Qin HW, Yang SC et al (2002) Analysis of the rotary ultrasonic machining mechanism. J Mater Process Technol 129(1–3):182–185
Agarwal S (2015) On the mechanism and mechanics of material removal in ultrasonic machining. Int J Mach Tools Manuf 96:1–14
Volkov GA, Bratov VA, Gruzdkov AA et al (2011) Energy-based analysis of ultrasonically assisted turning. Shock Vib 18(1–2):333–341
Tabatabaei SMK, Behbahani S, Mirian SM (2013) Analysis of ultrasonic assisted machining (UAM) on regenerative chatter in turning. J Mater Process Technol 213(3):418–425
Zhang C, Zhang J, Feng P (2013) Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials. Int J Adv Manuf Technol 69(1):161–170
Ning F, Wang H, Cong W et al (2017) A mechanistic ultrasonic vibration amplitude model during rotary ultrasonic machining of CFRP composites. Ultrasonics 76:44–51
Hu P, Zhang JM, Pei ZJ (2002) Clyde Treadwell, Modeling of material removal rate in rotary ultrasonic machining: designed experiments. J Mater Process Technol 129:339–344
Zeng WM, Li ZC, Pei ZJ et al (2005) Experimental observation of tool wear in rotary ultrasonic machining of advanced ceramics. Int J Mach Tools Manuf 45(12–13):1468–1473
Li ZC, Cai LW, Pei ZJ et al (2006) Edge-chipping reduction in rotary ultrasonic machining of ceramics: finite element analysis and experimental verification. Int J Mach Tools Manuf 46(12–13):1469–1477
Wang Q, Pei ZJ, Gao H et al (2009) Rotary ultrasonic machining of potassium dihydrogen phosphate (KDP) crystal: an experimental investigation. Int J Mechatron Manuf Syst 2(4):414–426
Liu DF, Cong WL, Pei ZJ et al (2012) A cutting force model for rotary ultrasonic machining of brittle materials. Int J Mach Tools Manuf 52(1):77–84
Ning FD, Cong WL, Pei ZJ et al (2016) Rotary ultrasonic machining of CFRP: a comparison with grinding. Ultrasonics 66:125–132
Yu ZY, Rajurkar KP, Tandon A (2004) Study of 3D micro-ultrasonic machining. J Manuf Sci Eng-Trans ASME 126(4):727–732
Sreehari D, Sharma AK (2018) On form accuracy and surface roughness in micro-ultrasonic machining of silicon microchannels. Precis Eng 53:300–309
Kumar S, Dvivedi A (2019) On effect of tool rotation on performance of rotary tool micro-ultrasonic machining. Mater Manuf Process 34(5):475–486
Hu X (2007) Mechanism, characteristics and modeling of micro ultrasonic machining. The University of Nebraska-Lincoln
Zarepour H, Yeo SH (2012) Predictive modeling of material removal modes in micro ultrasonic machining. Int J Mach Tools Manuf 62:13–23
Wang J, Shimada K, Mizutani M et al (2018) Effects of abrasive material and particle shape on machining performance in micro ultrasonic machining. Precis Eng 51:373–387
James S, Sonate A (2018) Experimental study on micromachining of CFRP/Ti stacks using micro ultrasonic machining process. Int J Adv Manuf Technol 95(1):1539–1547
Shamoto E, Suzuki N, Moriwaki T et al (2002) Development of ultrasonic elliptical vibration controller for elliptical vibration cutting. CIRP Ann Manuf Technol 51(1):327–330
Li X, Zhang D (2006) Ultrasonic elliptical vibration transducer driven by single actuator and its application in precision cutting. J Mater Process Technol 180(1–3):91–95
Ma C, Shamoto E, Moriwaki T et al (2004) Study of machining accuracy in ultrasonic elliptical vibration cutting. Int J Mach Tools Manuf 44(12–13):1305–1310
Nath C, Rahman M, Neo KS (2011) Modeling of the effect of machining parameters on maximum thickness of cut in ultrasonic elliptical vibration cutting. J Manuf Sci Eng-Trans ASME 133:011007
Liu J, Jiang X, Han X et al (2019) Influence of parameter matching on performance of high-speed rotary ultrasonic elliptical vibration-assisted machining for side milling of titanium alloys. Int J Adv Manuf Technol 101(5):1333–1348
Zhang X, Kumar AS, Rahman M et al (2011) Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools. J Mater Process Technol 211(11):1701–1709
Suzuki N, Haritani M, Yang J et al (2007) Elliptical vibration cutting of tungsten alloy molds for optical glass parts. CIRP Ann Manuf Technol 56(1):127–130
Liu J, Zhang D, Qin L et al (2012) Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP). Int J Mach Tools Manuf 53(1):141–150
Tan R, Zhao X, Guo S et al (2020) Sustainable production of dry-ultra-precision machining of Ti–6Al–4V alloy using PCD tool under ultrasonic elliptical vibration-assisted cutting. J Clean Prod 248:119254
Kim GD, Loh BG (2007) An ultrasonic elliptical vibration cutting device for micro V-groove machining: kinematical analysis and micro V-groove machining characteristics. J Mater Process Technol 190(1–3):181–188
Bai W, Sun R, Gao Y et al (2016) Analysis and modeling of force in orthogonal elliptical vibration cutting. Int J Adv Manuf Technol 83(5):1025–1036
Kurniawan R, Kumaran ST, Ali S et al (2018) Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern. Int J Adv Manuf Technol 98(5):2031–2055
Goel S, Martinez FD, Chavoshi SZ et al (2018) Molecular dynamics simulation of the elliptical vibration-assisted machining of pure iron. J Micromanuf 1(1):6–19
Zhang J, Cui T, Ge C et al (2016) Review of micro/nano machining by utilizing elliptical vibration cutting. Int J Mach Tools Manuf 106:109–126
Suzuki N, Yokoi H, Shamoto E (2011) Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting. Precis Eng 35(1):44–50
Guo P, Ehmann KF (2013) An analysis of the surface generation mechanics of the elliptical vibration texturing process. Int J Mach Tools Manuf 64:85–95
Guo P, Lu Y, Ehmann KF et al (2014) Generation of hierarchical micro-structures for anisotropic wetting by elliptical vibration cutting. CIRP Ann Manuf Technol 63(1):553–556
Zhang J, Suzuki N, Wang Y et al (2015) Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting. Precis Eng 39:86–99
Shamoto E, Suzuki N, Tsuchiya E et al (2005) Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces. CIRP Ann Manuf Technol 54(1):321–324
Mann JB, Saldana C, Moscoso W et al (2009) Effects of controlled modulation on interface tribology and deformation in machining. Tribol Lett 35(3):221–227
Mann JB, Guo Y, Saldana C et al (2011) Enhancing material removal processes using modulation-assisted machining. Tribol Int 44(10):1225–1235
Yeung H, Sundaram NK, Mann JB et al (2013) Energy dissipation in modulation assisted machining. Int J Mach Tools Manuf 74:41–49
Gandhi R, Sebastian D, Basu S et al (2016) Surfaces by vibration/modulation-assisted texturing for tribological applications. Int J Adv Manuf Technol 85(1):909–920
Gao Y, Sun R, Chen Y et al (2016) Analysis of chip morphology and surface topography in modulation assisted machining. Int J Mech Sci 111:88–100
Debnath K, Singh I (2017) Low-frequency modulation-assisted drilling of carbon-epoxy composite laminates. J Manuf Process 25:262–273
Gao Y, Sun R, Chen Y, Leopold J (2016) Mechanical and thermal modeling of modulation-assisted machining. Int J Adv Manuf Technol 86(9):2945–2959
Gao Y, Mann JB, Chandrasekar S, Sun R, Leopold J (2017) Modelling of tool temperature in modulation-assisted machining. Procedia CIRP 58:204–209
Bai W, Sun R, Roy A, Silberschmidt VV (2017) Improved analytical prediction of chip formation in orthogonal cutting of titanium alloy Ti6Al4V. Int J Mech Sci 133:357–367
Bai W, Roy A, Guo L, Xu J, Silberschmidt VV (2021) Analytical prediction of frictional behaviour and shear angle in vibration-assisted cutting. J Manuf Process 62:37–46
Bai W, Sun R, Leopold J, Silberschmidt VV (2017) Microstructural evolution of Ti6Al4V in ultrasonically assisted cutting: Numerical modelling and experimental analysis. Ultrasonics 78:70–82
Bai W, Sun R, Leopold J (2016) Numerical modelling of microstructure evolution in Ti6Al4V alloy by ultrasonic assisted cutting. Procedia CIRP 46:428–431
Chen Y, Sun R, Gao Y, Leopold J (2017) A nested-ANN prediction model for surface roughness considering the effects of cutting forces and tool vibrations. Measurement 98:25–34
Gao Y, Sun R, Leopold J (2015) Analysis of cutting stability in vibration assisted machining using an analytical predictive force model. Procedia CIRP 31:515–520
Gao Y, Huang X, Lin M, Wang Z, Sun R (2014) Analysis and prediction of surface integrity in machining: a review. Appl Mech Mater 487:165–172
Bai W, Bisht A, Roy A, Suwas S, Sun R, Silberschmidt VV (2018) Effect of hybrid machining on structural integrity of aerospace-grade materials. Procedia CIRP 77:163–166
Gao Y, Sun R, Bai W (2014) A miniature cutting tool for elliptical vibration-assisted turning: design and kinematical analysis. Appl Mech Mater 610:23–27
Bai W, Wang K, Du D, Zhang J, Huang W, Xu J (2022) Design of an ultrasonic elliptical vibration device with two stationary points for ultra-precision cutting. Ultrasonics 120:106662
Bai W, Shu L, Sun R, Xu J, Silberschmidt VV, Sugita N (2020) Mechanism of material removal in orthogonal cutting of cortical bone. J Mech Behav Biomed Mater 104:103618
Bai W, Shu L, Sun R, Xu J, Silberschmidt VV, Sugita N (2020) Improvements of material removal in cortical bone via impact cutting method. J Mech Behav Biomed Mater 108:103791
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2023 Huazhong University of Science and Technology Press
About this chapter
Cite this chapter
Bai, W., Gao, Y., Sun, R. (2023). Introduction. In: Vibration Assisted Machining. Research on Intelligent Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-19-9131-8_1
Download citation
DOI: https://doi.org/10.1007/978-981-19-9131-8_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-9130-1
Online ISBN: 978-981-19-9131-8
eBook Packages: EngineeringEngineering (R0)