Abstract
This research paper intends to provide an analysis of the electric motor-operated heated triple pump (HTP) sprayer for a long range of jet discharge used in horticulture and orchards. The spraying is used to control the weeds, insects, and disorder subjected to crops, such as grass, fruits, and vegetables. This sprayer is assured by the HTP unit, which is driven by an electric motor. The HTP unit consists of three pistons which are referred to as “heated triple pistons” which move in a water suction chamber which sucks water from the formulation tank by the reciprocating motion of a triple piston. These triple pistons are connected together by means of a crankshaft in perfect coordination, and the rotational movement of the crank shaft is achieved by means of a pulley which is mounted on a crankshaft stop which is driven by an electric motor and power is delivered to the pulley by means of a V belt. The electric motor is rotated at 1400 RPM. The electric motor is single-phase operated and requires a 230 V to 240 V electric supply to run the electric motor, which has a frequency of 50 Hz. This HTP sprayer unit is used to achieve a high pressure of 10 bars to 30 bars, and a range of 1 m to 10 m is achieved by using this spring unit. This spraying unit can minimize non-uniform calibration of mist formation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Waghmare S, Shelare S, Aglawe K, Khope P (2021) A mini review on fibre reinforced polymer composites. Mater Today: Proc https://doi.org/10.1016/j.matpr.2021.10.379
Pourkiaei SM, Ahmadi MH, Sadeghzadeh M, Moosavi S, Pourfayaz F, Chen L, Yazdi MAP, Kumar R (2019) Thermoelectric cooler and thermoelectric generator devices: a review of present and potential applications, modeling and materials. Energy 186:115849. https://doi.org/10.1016/j.energy.2019.07.179
Belkhode PN, Shelare SD, Sakhale CN, Kumar R, Shanmugan S, Soudagar MEM, Mujtaba MA (2021) Performance analysis of roof collector used in the solar updraft tower. Sustain Energy Technol Assess 48:101619. https://doi.org/10.1016/j.seta.2021.101619
Ahmadi MH, Ghazvini M, Sadeghzadeh M, AlhuyiNazari M, Kumar R, Naeimi A, Ming T (2018) Solar power technology for electricity generation: a critical review. Energy Sci Eng 6(5):340–361. https://doi.org/10.1002/ese3.239
Mowade S, Waghmare S, Shelare S, Tembhurkar C (2019) Mathematical model for convective heat transfer coefficient during solar drying process of green herbs. Comput Eng Technol 867–877. https://doi.org/10.1007/978-981-32-9515-5_81
Rajak DK, Pagar DD, Kumar R, Pruncu CI (2019) Recent progress of reinforcement materials: a comprehensive overview of composite materials. J Market Res 8(6):6354–6374. https://doi.org/10.1016/j.jmrt.2019.09.068
Belkhode P, Mehta G, Shelare S, Pachpor AA, Roy R (Feb 2022) Conditioning monitoring of a flexible coupling using experimental data based modelling. Rom J Acoust Vibr 18(2):93–103
Mathew JJ, Sakhale CN, Shelare SD (2020) Latest trends in sheet metal components and its processes—a literature review. Algorithms Intell Syst 565–574. https://doi.org/10.1007/978-981-15-0222-4_54
Shelare SD, Kumar R, Khope PB (2021) Assessment of physical, frictional and aerodynamic properties of charoli (Buchanania Lanzan Spreng) nut as potentials for development of processing machines. Carpathian J Food Sci Technol 174–191. https://doi.org/10.34302/crpjfst/2021.13.2.16
Jawalekar SB, Shelare SD (2020) Development and performance analysis of low cost combined harvester for rabi crops. Agric Eng Int CIGR J 22(1):197–201
Waghmare S, Shelare S, Sirsat P, Pathare N, Awatade S (2020) Development of an innovative multi-operational furnace. Int J Sci Technol Res 9(4):885–889
Ramteke AL, Waghmare SN, Shelare SD, Sirsat PM (2021) Development of sheet metal die by using CAD and simulation technology to improvement of quality. In: Proceedings of the international conference on industrial and manufacturing systems (CIMS-2020) pp. 687–701. https://doi.org/10.1007/978-3-030-73495-4_47
Waghmare SN, Shelare SD, Tembhurkar CK, Jawalekar SB (2020) Pyrolysis system for environment-friendly conversion of plastic waste into fuel. Adv Mater Proc 131–138. https://doi.org/10.1007/978-981-15-4748-5_13
Dhande HK, Shelare SD, Khope PB (2020) Developing a mixed solar drier for improved postharvest handling of food grains. Agric Eng Int CIGR J 22(4):166–173
Aglawe KR, Dhande M, Matey M, Shelare S (2022) State of the art and materials based characteristics in power converters for electric vehicles. Mater Today: Proc 58:726–735. https://doi.org/10.1016/j.matpr.2022.02.384
Shelare SD, Kumar R, Khope PB (2021) Flywheel energy application in commercial and agricultural field: a typical review. In: Parey A, Kumar R, Singh M (eds) Recent trends in engineering design. Lecture notes in mechanical engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-1079-0_19
Shelare SD, Kumar R, Khope PB (2020) Formulation of a mathematical model for quantity of deshelled nut in charoli nut deshelling machine. Adv Metrol Meas Eng Surf 89–97. https://doi.org/10.1007/978-981-15-5151-2_9
Aglawe KR, Yadav RK, Thool SB (2022) Development of a mathematical model for prediction of heat transfer coefficient in micro-channel heat sink. Mater Today: Proc 54:753–757. https://doi.org/10.1016/j.matpr.2021.11.070
Khope PB, Shelare SD (2021) Prediction of torque and cutting speed of pedal operated chopper for silage making. Adv Industr Mach Mech 89–97. https://doi.org/10.1007/978-981-16-1769-0_22
Aglawe KR, Yadav RK, Thool SB (2021) Current technologies on electronics cooling and scope for further improvement: a typical review. In: Proceedings of the international conference on industrial and manufacturing systems (CIMS-2020) pp 389–408. https://doi.org/10.1007/978-3-030-73495-4_27
Belkhode PN, Ganvir VN, Shende AC, Shelare SD (2022) Utilization of waste transformer oil as a fuel in diesel engine. Mater Today: Proc 49:262–268. https://doi.org/10.1016/j.matpr.2021.02.008
Shelare SD, Aglawe KR, Belkhode PN (2022) A review on twisted tape inserts for enhancing the heat transfer. Mater Today: Proc 54:560–565. https://doi.org/10.1016/j.matpr.2021.09.012
Belkhode P, Ganvir V, Shelare S, Shende A, Maheshwary P (2022) Experimental investigation on treated transformer oil (TTO) and its diesel blends in the diesel engine. Energy Harvesting Syst 9(1):1–11. https://doi.org/10.1515/ehs-2021-0032
Shelare SD, Aglawe KR, Khope PB (2021) Computer aided modeling and finite element analysis of 3-D printed drone. Mater Today: Proc 47:3375–3379. https://doi.org/10.1016/j.matpr.2021.07.162
Shelare SD, Aglawe KR, Waghmare SN, Belkhode PN (2021) Advances in water sample collections with a drone—a review. Mater Today: Proc 47:4490–4494. https://doi.org/10.1016/j.matpr.2021.05.327
Kaswan MS, Rathi R (2019) Analysis and modeling the enablers of green lean six sigma implementation using interpretive structural modeling. J Clean Prod 231:1182–1191. https://doi.org/10.1016/j.jclepro.2019.05.25
Dhutekar P, Mehta G, Modak J, Shelare S, Belkhode P (2021) Establishment of mathematical model for minimization of human energy in a plastic moulding operation. Mater Today: Proc. https://doi.org/10.1016/j.matpr.2021.05.330
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Shelare, S.D., Waghmare, S.N., Yenurkar, M.M., Jodh, G.R. (2023). Experimental Analysis of Sprayer for Horticulture and Orchards. In: Vasudevan, H., Kottur, V.K.N., Raina, A.A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-7971-2_64
Download citation
DOI: https://doi.org/10.1007/978-981-19-7971-2_64
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-7970-5
Online ISBN: 978-981-19-7971-2
eBook Packages: EngineeringEngineering (R0)