Abstract
The objective of this paper is to identify respiratory diseases such as Asthma, Covid-19, pulmonary disease, and diabetes from the human breath odor using a non-invasive method. For detecting diseases using a non-invasive method, temperature sensor (to identify body temperature), pulse oximeter sensor (to identify blood oxygen level and heartbeat rate), and acetone sensor (to identify respiratory diseases from human breath odor) with Arduino ATMega328 microcontroller unit (MCU) were used. If the temperature is greater than 37.2 \(^{\circ }\)C, the heartbeat rate is greater than 100 bpm, and the oxygen level is less than 92% \(\text {SpO}_2\), Covid-19 will be detected. If the oxygen level is less than 95% \(\text {SpO}_2\), the heartbeat rate is at (100–125) bpm, and the temperature is at 36.1–37 \(^{\circ }\)C, asthma will be detected. If the heart rate is greater than 86 bpm, the temperature at 36.1–37 \(^{\circ }\)C, the oxygen level at 92–97% \(\text {SpO}_2\), and the acetone level at (354–496) ppm, diabetes will be detected. If the oxygen level is less than 92% \(\text {SpO}_2\), the temperature at 36.1–37 \(^{\circ }\)C, and the heartbeat rate is greater than 110 bpm, the pulmonary disease will be identified. After disease detection, suggestions will be provided to the patients based on their health reports. Finally, suggested medicines will be sent to the patient’s registered mobile phones by connecting node MCU with blynk using IoT technology. The results will be stored and the patients can compare their health conditions for future analysis. The traditional method of laboratory tests is considered to consume more time. In our method, the duration of the detection process is less and the results help to identify health problems at early stages and predict diseases quickly compared to the traditional method.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arai T, Kayashima S, Kikuchi M, Kaneyoshi A, Itoh N (1995) A non-invasive portable blood-glucose monitoring system: sampling of suction effusion fluid. Nihon rinsho. Jpn J Clin Med 53(4):1017–1022
Barnes PJ, Shapiro SD, Pauwels R (2003) Chronic obstructive pulmonary disease: molecular and cellularmechanisms. Eur Respir J 22(4):672–688
Behera B, Joshi R, Vishnu GA, Bhalerao S, Pandya HJ (2019) Electronic nose: a non-invasive technology for breath analysis of diabetes and lung cancer patients. J Breath Res 13(2):024001
Broza YY, Haick H (2013) Nanomaterial-based sensors for detection of disease by volatile organic compounds. Nanomedicine 8(5):785–806
Curran AM, Rabin SI, Prada PA, Furton KG (2005) Comparison of the volatile organic compounds present in human odor using spme-gc/ms. J Chem Ecol 31(7):1607–1619
Esfahani S, Wicaksono A, Mozdiak E, Arasaradnam RP, Covington JA (2018) Non-invasive diagnosis of diabetes by volatile organic compounds in urine using faims and fox4000 electronic nose. Biosensors 8(4):121
Ghaffari R, Yang DS, Kim J, Mansour A, Wright JA Jr, Model JB, Wright DE, Rogers JA, Ray TR (2021) State of sweat: emerging wearable systems for real-time, noninvasive sweat sensing and analytics. ACS Sens 6(8):2787–2801
Ito N, Saito A, Kuriyama T, Kimura J, Arai T, Kikuchi M, Kayashima S, Nagata N (1992) Development of a non-invasive transcutaneous blood glucose monitoring method using an isfet biosensor. Front Med Biol Eng Int J Jpn Soc Med Electron Biol Eng 4(1):35–45
Kao KW, Hsu MC, Chang YH, Gwo S, Yeh JA (2012) A sub-ppm acetone gas sensor for diabetes detection using 10 nm thick ultrathin inn fets. Sensors 12(6):7157–7168
Karpova EV, Shcherbacheva EV, Galushin AA, Vokhmyanina DV, Karyakina EE, Karyakin AA (2019) Noninvasive diabetes monitoring through continuous analysis of sweat using flow-through glucose biosensor. Anal Chem 91(6):3778–3783
Li S, Wang J, Zhang B, Li X, Liu Y (2019) Diabetes mellitus and cause-specific mortality: a population-based study. Diab Metabol J 43(3):319–341
Mageshkumar G, Kasthuri N, Tamilselvan K, Suthagar S, Sharmila A (2020) Design of industrial data monitoring device using iot through modbus protocol. Int J Sci Technol Res 9:1392–1396
Mhishi SB, Van Zyl DG (2020) Evaluation of the accuracy of visual glucose estimates by healthcare providers and patients at Kalafong Hospital, City of Tshwane, South Africa. J Endocrinol Metabol Diabet South Afr 25(1):18–23
Monge J, Postolache O, Plopa O, Trandabat A, Schreiner O, Schreiner T (2019) Glucose detection in sweat using biosensors. In: 2019 E-health and bioengineering conference (EHB), pp 1–5. IEEE
Nasution T, Asrosa R, Nainggolan I (2018) Application of mq-138 semiconductor sensor for breath acetone detection. J Phys Conf Ser 1116:032023
Pattemore PK, Asher MI, Harrison AC, Mitchell EA, Rea HH, Stewart AW (1990) The interrelationship among bronchial hyperresponsiveness, the diagnosis of asthma, and asthma symptoms. Am Rev Respir Dis 142(3):549–554
Rizzoni D, Mengozzi A, Masi S, Agabiti Rosei C, De Ciuceis C, Virdis A (2022) New noninvasive methods to evaluate microvascular structure and function. Hypertension 79(5):874–886
Rydosz A (2018) Sensors for enhanced detection of acetone as a potential tool for noninvasive diabetes monitoring. Sensors 18(7):2298
Struyf T, Deeks JJ, Dinnes J, Takwoingi Y, Davenport C, Leeflang MM, Spijker R, Hooft L, Emperador D, Domen J et al (2021) Signs and symptoms to determine if a patient presenting in primary care or hospital outpatient settings has covid-19. Cochrane Database Syst Rev 2
Suma V (2021) Wearable iot based distributed framework for ubiquitous computing. J Ubiquit Comput Commun Technol (UCCT) 3(01):23–32
Suthagar S, Tamilselvan K, Priyadharshini M, Nihila B (2021) Determination of apple, lemon, and banana ripening stages using electronic nose and image processing. Innovations in cyber physical systems. Springer, Berlin, pp 755–769
Tang L, Chang SJ, Chen CJ, Liu JT (2020) Non-invasive blood glucose monitoring technology: a review. Sensors 20(23):6925
Wang H et al (2020) Iot based clinical sensor data management and transfer using blockchain technology. J ISMAC 2(03):154–159
Wyszynski B, Yatabe R, Nakao A, Nakatani M, Oki A, Oka H, Toko K (2017) Array of chemosensitive resistors with composites of gas chromatography (gc) materials and carbon black for detection and recognition of vocs: a basic study. Sensors 17(7):1606
Yatabe R, Shunori A, Wyszynski B, Hanai Y, Nakao A, Nakatani M, Oki A, Oka H, Washio T, Toko K (2020) Odor sensor system using chemosensitive resistor array and machine learning. IEEE Sens J 21(2):2077–2083
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Suthagar, S., Mageshkumar, G., Hemalatha, K., Prabhakara Rao, S., Mahesh, R., Kural Eniyavan, S.M. (2023). Identification of Respiratory Diseases and Diabetes by Non-invasive Method Using IoT. In: Smys, S., Kamel, K.A., Palanisamy, R. (eds) Inventive Computation and Information Technologies. Lecture Notes in Networks and Systems, vol 563. Springer, Singapore. https://doi.org/10.1007/978-981-19-7402-1_30
Download citation
DOI: https://doi.org/10.1007/978-981-19-7402-1_30
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-7401-4
Online ISBN: 978-981-19-7402-1
eBook Packages: EngineeringEngineering (R0)