Abstract
This paper discusses the alternate materials used in construction of green buildings. It focuses on their physical, chemical, and engineering qualities of materials. Without further study, rules and apparatuses employed in the design of green constructions, it is difficult to reduce energy consumption. Biodegradable materials and solar electricity have been used to make green buildings. Eco-friendly construction methods include the use of biodegradable materials. For the creation of green structures, this study compares and contrasts the use of alternative sustainable building materials with other standard conventional building materials. Determining the best way to use feasible sustainable development materials and comparing it to the traditional development materials used in the present without compromising their accessibility is another goal of this article. The goal of the study is to research and demonstrate how feasible structure materials might help to reduce the impact on the environment and investigate how practical construction materials may reduce the impact of ecological degradation and create sturdy structures that are sustainable for both the occupants and the environment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pulselli R, Simoncini E, Pulselli F, Bastianoni S (2007) Energy analysis of building manufacturing, maintenance and use: building indices to evaluate housing sustainability. Energy Build 39(5):620–628
Wang W, Zmeureanua R, Rivard H (2005) Applying multi-objective genetic algorithms in green building design optimization. Build Environ 40(11):1512–1525
Yudelson J (2008) The green building revolution. Island Press, Washington, D.C.
Reddy BV, Jagadish K (2003) Embodied energy of common and alternative building materials and technologies. Energy Build 35(2):129–137
Ries R, Bilec M, Gokhan N, Needy K (2006) The economic benefits of green buildings: a comprehensive case study. Eng Econ 51(3):259–295
Yu C (2008) Environmentally sustainable acoustics in urban residential areas. PhD dissertation. University of Sheffield, School of Architecture, UK
Seyfang G (2009) Community action for sustainable housing: building a low carbon future. Energy Policy. https://doi.org/10.1016/j.enpol.2009.10.027
Hulme J, Radford N (2010) Sustainable supply chains that support local economic development. Prince’s Foundation for the Built Environment
Fernandez JE (2006) Material architecture: emergent materials for innovative buildings and ecological construction. Architectural Press, Amsterdam, The Netherlands and Boston, MA, USA
Huang T, Shi F, Tanikawa H, Fei J, Han J (2013) Materials demand and environmental impact of buildings construction and demolition in China based on dynamic material flow analysis. Resour Conserv Recycl 72(4):91–101
Nazer H, Lucelia R (2015) Optimizing housing design to improve energy efficiency in Jordan. In: 14th international conference on sustainable energy technologies SET 2015—25th to 27th August 2015, Nottingham UK
Huberman N, Pearlmutter D (2008) A lifecycle energy analysis of building materials in the Negev desert. Energy Build 40(3):837–848
Reddy BVV, Jagadish KS (2003) Embodied energy of common and alternative building materials and technologies. Energy Build 35(2):129–137
Shahriar S, Kashif M, Al-Amin Md (2011) A comparative analysis of building materials for sustainable construction with emphasis on CO2 reduction. Int Environ Sustain Dev 10(4)
Amani N, Kiaee E (2020) Developing a two-criteria framework to rank thermal insulation materials in nearly zero energy buildings using multi-objective optimization approach. Clean Prod 276:122592
Streimikiene D, Skulskis V, Balezentis T, Agnusdei GP (2020) Uncertain multi-criteria sustainability assessment of green building insulation materials. Energy Build 219:110021
Battista G, Lieto Vollaro E, Lieto Vollaro R (2021) How cool pavements and green roof affect building energy performances. Heat Transf Eng
Shree V, Nautiyal H, Goel V (2021) Carbon footprint estimation for academic building in India. In: Muthu SS (ed) LCA based carbon footprint assessment. Environmental footprints and eco-design of products and processes. Springer, Singapore
Ortiz O, Castells F, Sonnemann G (2009) Sustainability in the construction industry: a review of recent developments based on LCA. Constr Build Mater 23:28–39
Paul WL, Taylor PA (2008) A comparison of occupant comfort and satisfaction between a green building and a conventional building. Build Environ 43(4):1858–1870
Vinothkumar S, Jie S, Bin Y, Kai L, Ramesh R (2018) Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti–6Al–4V alloy. J Manuf Process 36:188–196
Jeyaprakash N, Muthukannan D, Ramesh R (2018) Modelling of Cr3C2–25% NiCr laser alloyed cast iron in high temperature sliding wear condition using response surface methodology. Arch Metall Mater 63(3):1303–1315
Thirugnanasambantham KG, Ramesh R, Sankaramoorthy T, Velmurugan P, Kannagi A, Chaitanya KRM, Sai KCV, Mustafa MA, Ramesh CV (2018) Degradation mechanism for high-temperature sliding wear in surface-modified In718 superalloy. Cogent Eng 5:1501864
Giridhar D, Ramesh R (2020) Contact stress evaluation of micro-grooving process of alumina ceramic and validation with acoustic emission parameters. In: Advances in industrial automation and smart manufacturing. Lecture notes in mechanical engineering. Springer, pp 597–617
Dillibabu V, Muthukannan D, Chandrasekar U, Ramesh R (2016) Microstructural studies on laser dissimilar welded Ni and steel alloys for aeronautical turbine applications. Lasers Eng 37:247–260
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Nitu, Kumar, R., Aggarwal, V., Gupta, S.M. (2023). Alternate Material’s Approach Toward Green Construction. In: Arockiarajan, A., Duraiselvam, M., Raju, R., Reddy, N.S., Satyanarayana, K. (eds) Recent Advances in Materials Processing and Characterization. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-5347-7_12
Download citation
DOI: https://doi.org/10.1007/978-981-19-5347-7_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-5346-0
Online ISBN: 978-981-19-5347-7
eBook Packages: EngineeringEngineering (R0)