Abstract
This study encompasses a deep understanding of nanohybrid materials that are produced by combining an organic material with inorganic filler. This amalgamation of different organic and inorganic compounds is cheaper and has very good features that include membrane permeability, conductivity properties, stability, perfect water retention, and mechanical properties. There are many factors such as type and size of particles and their preparation techniques that greatly affect properties of nanohybrids. These nanohybrid materials are extensively being used in different applications for fuel cells that are thought to be efficient devices for converting chemical energy from a gaseous fuel other than conventional fossil fuel into electrical energy. It is anticipated that due to zero emissions, fuel cells will be replaced by rechargeable batteries and heat engines in near future. A complete note on the working principle and proton conduction mechanism in fuel cells is described in this study. Nafion membranes were conventionally used in fuel cells. Although these membranes provide attractively high conductivity, it also includes many problems such as fuel crossover, high cost, water handling, and CO poisoning that requires special attention. To address these problems, Nafion is combined with metal oxides, e.g., Fe2TiO5, ZrO2, CeO2, and TiO2 to get a modified Nafion-metal oxide nanohybrid. It is synthesized using water as solvent and has very good proton conductivity along with better mechanical strength and water retention ability. There are also many other nanohybrids, e.g., graphene-based nanohybrids, carbon nanotube-based nanohybrids, conducting polymer-based nanohybrids, novel green nanohybrids, etc., which can be replaced by simple Nafion-based nanohybrids in fuel cells to get more specified results. Major function of all these nanohybrid membranes is to minimize the flow of electrons and at the same time increasing the rate of flow of ions through it in any kind of fuel cell. Overall, in this study all types of nanohybrids are discussed for their applications in different types of fuel cells.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ma W, Yah WO, Otsuka H, Takahara A (2012) Application of imogolite clay nanotubes in organic-inorganic nanohybrid materials. J Mater Chem 22:11887–11892
Yin PT, Shah S, Chhowalla M, Lee K-B (2015) Design, synthesis, and characterization of graphene-nanoparticle hybrid materials for bioapplications. Chem Rev 115:2483–2531. https://doi.org/10.1021/cr500537t
He H, Li J, Yu C, Luo Z (2019) Surface decoration of microdisk-like g-C3N4/diatomite with Ag/AgCl nanoparticles for application in Cr(VI) reduction. Sustain Mater Technol 22:e00127. https://doi.org/10.1016/J.SUSMAT.2019.E00127
Hajilary N, Shahi A, Rezakazemi M (2018) Evaluation of socio-economic factors on CO2 emissions in Iran: factorial design and multivariable methods. J Clean Prod 189:108–115. https://doi.org/10.1016/J.JCLEPRO.2018.04.067
Zakaria Z, Shaari N, Kamarudin SK et al (2020) A review of progressive advanced polymer nanohybrid membrane in fuel cell application. Int J Energ Res 44:8255–8295
Branco CM, Sharma S, de Camargo Forte MM, Steinberger-Wilckens R (2016) New approaches towards novel composite and multilayer membranes for intermediate temperature-polymer electrolyte fuel cells and direct methanol fuel cells. J Power Sour 316:139–159. https://doi.org/10.1016/J.JPOWSOUR.2016.03.052
Hegde RM, Kurkuri MD, Kigga M (2019) Current scenario of nanocomposit materials for fuel cell applications. Springer Nature. https://doi.org/10.1007/978-3-030-05399-4_20
Weydahl H, Gilljam M, Lian T et al (2020) Fuel cell systems for long-endurance autonomous underwater vehicles—challenges and benefits. Int J Hydrogen Energ 45:5543–5553. https://doi.org/10.1016/J.IJHYDENE.2019.05.035
Inamuddin TS, Kumar MR, Asiri AM (2019) Sustainable polymer composites and nanocomposites. Springer International Publishing, Cham. https://doi.org/10.1007/978-3-030-05399-4
Nafil RQ, Majeed MS (2020) Fuel cells as a source of green energy. In: Thermodynamics and energy engineering. IntechOpen
Manoharan Y, Hosseini SE, Butler B et al (2019) Hydrogen fuel cell vehicles; Current status and future prospect. Appl Sci (Switzerland) 9.https://doi.org/10.3390/app9112296
Lu Y, Zhu B, Cai Y et al (2016) Progress in electrolyte-free fuel cells. Front Energ Res 4:5. https://doi.org/10.3389/fenrg.2016.00017
Chong L, Wen J, Kubal J et al (2018) Ultralow-loading platinum-cobalt fuel cell catalysts derived from imidazolate frameworks. Science 362:1276–1281. https://doi.org/10.1126/science.aau0630
Flores GH, Poggi-Varaldo HM, Solorza-Feria O, Ponce Noyola MT (2015) Improvement of microbial fuel cell performance by selection of anodic materials and enrichment of inoculum. J New Mater Electrochem Syst
Agmon N (1995) The Grotthuss mechanism. Chem Phys Lett 244:456–462. https://doi.org/10.1016/0009-2614(95)00905-J
Peighambardoust SJ, Rowshanzamir S, Amjadi M (2010) Review of the proton exchange membranes for fuel cell applications. Int J Hydrogen Energ 35:9349–9384. https://doi.org/10.1016/J.IJHYDENE.2010.05.017
Suryani CYN, Lai JY, Liu YL (2012) Polybenzimidazole (PBI)-functionalized silica nanoparticles modified PBI nanocomposite membranes for proton exchange membranes fuel cells. J Membr Sci 403–404:1–7. https://doi.org/10.1016/J.MEMSCI.2012.01.043
Boutsika LG, Enotiadis A, Nicotera I et al (2016) Nafion® nanocomposite membranes with enhanced properties at high temperature and low humidity environments. Int J Hydrogen Energ 41:22406–22414. https://doi.org/10.1016/J.IJHYDENE.2016.08.142
Mohammadi G, Jahanshahi M, Rahimpour A (2013) Fabrication and evaluation of Nafion nanocomposite membrane based on ZrO2–TiO2 binary nanoparticles as fuel cell MEA. Int J Hydrogen Energ 38:9387–9394. https://doi.org/10.1016/J.IJHYDENE.2012.09.096
Hooshyari K, Javanbakht M, Naji L, Enhessari M (2013) Nanocomposite proton exchange membranes based on Nafion containing Fe2TiO5 nanoparticles in water and alcohol environments for PEMFC. J Membr Sci 454:74–81. https://doi.org/10.1016/J.MEMSCI.2013.11.033
Yang Y, Han C, Jiang B et al (2016) Graphene-based materials with tailored nanostructures for energy conversion and storage. Mater Sci Eng R Rep 102:1–72. https://doi.org/10.1016/J.MSER.2015.12.003
Peng KJ, Lai JY, Liu YL (2016) Nanohybrids of graphene oxide chemically-bonded with Nafion: preparation and application for proton exchange membrane fuel cells. J Membr Sci 514:86–94. https://doi.org/10.1016/J.MEMSCI.2016.04.062
Georgakilas V, Perman Jason A, Tucek J (2015) Broad family of carbon nanoallotropes: classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures. In: American Chemical Society. https://doi.org/10.1021/cr500304f
Akbari E, Buntat Z (2017) Benefits of using carbon nanotubes in fuel cells: a review. Int J Energy Res 41:92–102. https://doi.org/10.1002/er.3600
Tohidian M, Ghaffarian SR (2017) Polyelectrolyte nanocomposite membranes with imidazole-functionalized multi-walled carbon nanotubes for use in fuel cell applications. J Macromol Sci Part B Phys 56:725–738. https://doi.org/10.1080/00222348.2017.1375372
Mishra P, Jain R (2016) Electrochemical deposition of MWCNT-MnO2/PPy nano-composite application for microbial fuel cells. Int J Hydrogen Energy 41:22394–22405. https://doi.org/10.1016/J.IJHYDENE.2016.09.020
Mirzaei F, Parnian MJ, Rowshanzamir S (2017) Durability investigation and performance study of hydrothermal synthesized platinum-multi walled carbon nanotube nanocomposite catalyst for proton exchange membrane fuel cell. Energy 138:696–705. https://doi.org/10.1016/J.ENERGY.2017.07.098
Zhou Z, Zholobko O, Wu XF et al (2021) Polybenzimidazole-based polymer electrolyte membranes for high-temperature fuel cells: current status and prospects. Energies 14.https://doi.org/10.3390/en14010135
Ghosh S, Das S, Mosquera MEG (2020) Conducting polymer-based nanohybrids for fuel cell application. Polymers 12:1–19. https://doi.org/10.1016/j.fuel.2021.121681
Gerber IC, Serp P (2019) A theory/experience description of support effects in carbon-supported catalysts. Chem Rev 120:1250–1349. https://doi.org/10.1021/acs.chemrev.9b00209
Xu P, Han X, Zhang B et al (2014) Multifunctional polymer-metal nanocomposites via direct chemical reduction by conjugated polymers. Chem Soc Rev 43:1349–1360
Ren X, Lv Q, Liu L et al (2019) Current progress of Pt and Pt-based electrocatalysts used for fuel cells. Sustain Energ Fuels 4:15–30. https://doi.org/10.1039/c9se00460b
Ghosh S, Maiyalagan T, Basu RN (2016) Nanostructured conducting polymers for energy applications: Towards a sustainable platform. Nanoscale 8:6921–6947. https://doi.org/10.1039/C5NR08803H
Ghosh S, Bhandary N, Basu RN (2017) Synergistic effects of polypyrrole nanofibers and Pd nanoparticles for improved electrocatalytic performance of Pd/PPy nanocomposites for ethanol oxidation. Electrocatalysis. https://doi.org/10.1007/s12678-017-0374-x
Shifrina ZB, Matveeva VG, Bronstein LM (2019) Role of polymer structures in catalysis by transition metal and metal oxide nanoparticle composites. Am Chem Soc. https://doi.org/10.1021/acs.chemrev.9b00137
Stroman RO, Jackson GS (2014) Modeling the performance of an ideal NaBH4–H2O2 direct borohydride fuel cell. J Power Sour 247:756–769. https://doi.org/10.1016/J.JPOWSOUR.2013.08.100
Zhang B, Cao Y, Jiang S et al (2016) Enhanced proton conductivity of Nafion nanohybrid membrane incorporated with phosphonic acid functionalized graphene oxide at elevated temperature and low humidity. J Membr Sci 518:243–253. https://doi.org/10.1016/J.MEMSCI.2016.07.032
Bakangura E, Wu L, Ge L et al (2016) Mixed matrix proton exchange membranes for fuel cells: state of the art and perspectives. Prog Polym Sci 57:103–152. https://doi.org/10.1016/J.PROGPOLYMSCI.2015.11.004
Gouda MH, Elessawy NA, Santos DMF (2020) Synthesis and characterization of novel green hybrid nanocomposites for application as proton exchange membranes in direct borohydride fuel cells. Energies 13.https://doi.org/10.3390/en13051180
Matos BR, Isidoro RA, Santiago EI et al (2015) Nafion–titanate nanotubes composites prepared by in situ crystallization and casting for direct ethanol fuel cells. Int J Hydrogen Energ 40:1859–1867. https://doi.org/10.1016/J.IJHYDENE.2014.11.102
Liu X, Li Y, Peng S et al (2013) Modification of TiO2 with sulfate and phosphate for enhanced eosin Y-sensitized hydrogen evolution under visible light illumination. Photochem Photobiol Sci 12:1903–1910. https://doi.org/10.1039/c3pp50167a
Yang CC, Chien WC, Li YJ (2010) Direct methanol fuel cell based on poly(vinyl alcohol)/titanium oxide nanotubes/poly(styrene sulfonic acid) (PVA/nt-TiO2/PSSA) composite polymer membrane. J Power Sour 195:3407–3415. https://doi.org/10.1016/J.JPOWSOUR.2009.12.024
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Rauf, A., Urfi, M., Babar, Z.B., Iqbal, S., Rizwan, K. (2022). Organic–Inorganic Nanohybrids in Fuel Cell Applications. In: Rizwan, K., Bilal, M., Rasheed, T., Nguyen, T.A. (eds) Hybrid Nanomaterials. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-19-4538-0_20
Download citation
DOI: https://doi.org/10.1007/978-981-19-4538-0_20
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-4537-3
Online ISBN: 978-981-19-4538-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)