Abstract
Water contamination is a global problem today. Water pollution comes from a variety of causes, including the textile, photographic pigment industries, and so on. Majority of industries discharge their waste directly or indirectly into the river. Therefore, water becomes polluted and as a result, human and aquatic life is affected directly or indirectly. Hence, it is important to treat waste before discharging it into the river to ensure the survival of aquatic life and drinking water. Scientists all over the world have been working on recovering drinking water from textile wastewater. There are many ways to purify the wastewater which include making use of inorganic polymers (polymeric complex, polymeric nanocomposition), nanoparticles, complexes, catalysts, ion exchange resins, etc. Researchers are very interested in synthesizing inorganic polymer materials and evaluating their applications in textile wastewater treatment. Thus, it will be necessary to carry out a review on the inorganic polymers used in textile wastewater for the development of this field as well as for the new readers. In this chapter, we discuss inorganic polymers, classification of polymers, synthesis of polymers, and application of inorganic polymers in wastewater treatment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Abbasizadeh S, Keshtkar AR, Mousavian MA (2013) Preparation of a novel electrospun polyvinyl alcohol/titanium oxide nanofiber adsorbent modified with mercapto groups for uranium (VI) and thorium (IV) removal from aqueous solution. Chem Eng J 220:161–171. https://doi.org/10.1016/j.cej.2013.01.029
Ai L, Zhou Y, Jiang J (2011) Removal of methylene blue from aqueous solution by montmorillonite/CoFe2O4 composite with magnetic separation performance. Desalination 266(1–3):72–77. https://doi.org/10.1016/j.desal.2010.08.004
Al-Zboon K, Al-Harahsheh MS, Hani FB (2011) Fly ash-based geopolymer for Pb removal from aqueous solution. J Hazard Mater 188(1–3):414–421. https://doi.org/10.1016/j.jhazmat.2011.01.133
Ameen S, Akhtar MS, Shin HS (2012) Hydrazine chemical sensing by modified electrode based on in situ electrochemically synthesized polyaniline/graphene composite thin film. Sens Actuators, B Chem 173:177–183. https://doi.org/10.1016/j.snb.2012.06.065
Arash B, Park HS, Rabczuk T (2015) Mechanical properties of carbon nanotube reinforced polymer nanocomposites: a coarse-grained model. Compos B Eng 80:92–100. https://doi.org/10.1016/j.compositesb.2015.05.038
Bakunin VN, Suslov AY, Kuzmina GN, Parenago OP, Topchiev AV (2004) Synthesis and application of inorganic nanoparticles as lubricant components—a review. J Nanopart Res 6(2):273–284. https://doi.org/10.1023/B:NANO.0000034720.79452.e3
Borai EH, Breky MME, Sayed MS, Abo-Aly MM (2015) Synthesis, characterization and application of titanium oxide nanocomposites for removal of radioactive cesium, cobalt and europium ions. J Colloid Interface Sci 450:17–25. https://doi.org/10.1016/j.jcis.2015.02.062
Chandraker SK, Ghosh MK, Lal M, Shukla R (2021) A review on plant-mediated synthesis of silver nanoparticles, their characterization and applications. Nano Express. https://doi.org/10.1088/2632-959X/ac0355
Cheng TW, Lee ML, Ko MS, Ueng TH, Yang SF (2012) The heavy metal adsorption characteristics on metakaolin-based geopolymer. Appl Clay Sci 56:90–96. https://doi.org/10.1016/j.clay.2011.11.027
David G, Drobota M, Simionescu BC (2015) Preparation approach effect on polyurethane/montmorillonite nanocomposites characteristics. High Perform Polym 27(5):555–562. https://doi.org/10.1177/0954008315584184
Debrassi A, Baccarin T, Demarchi CA, Nedelko N, Ślawska-Waniewska A, Dłużewski P, Bilska M, Rodrigues CA (2012) Adsorption of Remazol red 198 onto magnetic N-lauryl chitosan particles: equilibrium, kinetics, reuse and factorial design. Environ Sci Pollut Res 19(5):1594–1604. https://doi.org/10.1007/s11356-011-0662-6
Dong H, Sliozberg YR, Snyder JF, Steele J, Chantawansri TL, Orlicki JA, Walck SD, Reiner RS, Rudie AW (2015) Highly transparent and toughened poly (methyl methacrylate) nanocomposite films containing networks of cellulose nanofibrils. ACS Appl Mater Interfaces 7(45):25464–25472. https://doi.org/10.1021/acsami.5b08317
Esmaeilirad N, White S, Terry C, Prior A, Carlson K (2016) Influence of inorganic ions in recycled produced water on gel-based hydraulic fracturing fluid viscosity. J Petrol Sci Eng 139:104–111. https://doi.org/10.1016/j.petrol.2015.12.021
Fu Z, He C, Li H, Yan C, Chen L, Huang J, Liu YN (2015) A novel hydrophilic–hydrophobic magnetic interpenetrating polymer networks (IPNs) and its adsorption towards salicylic acid from aqueous solution. Chem Eng J 279:250–257. https://doi.org/10.1016/j.cej.2015.04.146
Ge Y, Cui X, Liao C, Li Z (2017) Facile fabrication of green geopolymer/alginate hybrid spheres for efficient removal of Cu (II) in water: batch and column studies. Chem Eng J 311:126–134. https://doi.org/10.1016/j.cej.2016.11.079
Ghosh MK, Jain K, Khan S, Das K, Ghorai TK (2020) New dual-functional and reusable bimetallic Y2ZnO4 nanocatalyst for organic transformation under microwave/green conditions. ACS Omega 5(10):4973–4981. https://doi.org/10.1021/acsomega.9b03875
Ghosh MK, Sahu S, Gupta I, Ghorai TK (2020) Green synthesis of copper nanoparticles from an extract of Jatropha curcas leaves: characterization, optical properties, CT-DNA binding and photocatalytic activity. RSC Adv 10(37):22027–22035. https://doi.org/10.1039/D0RA03186K
Ghosh NG, Sarkar A, Zade SS (2021) The type-II n-n inorganic/organic nano-heterojunction of Ti3+ self-doped TiO2 nanorods and conjugated co-polymers for photoelectrochemical water splitting and photocatalytic dye degradation. Chem Eng J 407:127227. https://doi.org/10.1016/j.cej.2020.127227
Herrera G, Montoya N, Domenech-Carbo A, Alarcón J (2013) Synthesis, characterization and electrochemical properties of iron-zirconia solid solution nanoparticles prepared using a sol–gel technique. Phys Chem Chem Phys 15(44):19312–19321. https://doi.org/10.1039/C3CP53216J
Hertel T, Novais RM, Alarcón RM, Labrincha JA, Pontikes Y (2019) Use of modified bauxite residue-based porous inorganic polymer monoliths as adsorbents of methylene blue. J Clean Prod 227:877–889. https://doi.org/10.1016/j.jclepro.2019.04.084
Huang H, Liang W, Li R, Ali A, Zhang X, Xiao R, Zhang Z, Awasthi MK, Du D, Dang P, Huang D (2018) Converting spent battery anode waste into a porous biocomposite with high Pb (II) ion capture capacity from solution. J Clean Prod 20(184):622–631. https://doi.org/10.1016/j.jclepro.2018.03.017
Hudcová B, Veselská V, Filip J, Číhalová S, Komárek M (2018) Highly effective Zn (II) and Pb (II) removal from aqueous solutions using Mg–Fe layered double hydroxides: comprehensive adsorption modeling coupled with solid state analyses. J Clean Prod 171:944–953. https://doi.org/10.1016/j.jclepro.2017.10.104
Hussain F, Hojjati M, Okamoto M, Gorga RE (2006) Polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 40(17):1511–1575. https://doi.org/10.1177/0021998306067321
Jain P, Pradeep T (2005) Potential of silver nanoparticle coated polyurethane foam as an antibacterial water filter. Biotechnol Bioeng 90(1):59–63. https://doi.org/10.1002/bit.20368
Li L, Duan H, Wang X, Wang C (2015) Fabrication of novel magnetic nanocomposite with a number of adsorption sites for the removal of dye. Int J Biol Macromol 78:17–22
Li C, Bai H, Shi G (2009) Conducting polymer nanomaterials: electrosynthesis and applications. Chem Soc Rev 38(8):2397–2409. https://doi.org/10.1039/B816681C
Li HY, Huang DN, Ren KF, Ji J (2020) Inorganic-polymer composite coatings for biomedical devices. Smart Mater Med. https://doi.org/10.1016/j.smaim.2020.10.002
Liang Y, Yu L, Yang R, Li X, Qu L, Li J (2017) High sensitive and selective graphene oxide/molecularly imprinted polymer electrochemical sensor for 2, 4-dichlorophenol in water. Sens Actuators, B Chem 240:1330–1335. https://doi.org/10.1016/j.snb.2016.08.137
Mallakpour S, Behranvand V, Mallakpour F (2019) Synthesis of alginate/carbon nanotube/carbon dot/fluoroapatite/TiO2 beads for dye photocatalytic degradation under ultraviolet light. Carbohyd Polym 224:115138. https://doi.org/10.1016/j.carbpol.2019.115138
Mark JE (1991) Some novel polysiloxane elastomers and inorganic-organic composites. J Inorg Organomet Polym 1(4):431–448. https://doi.org/10.1007/BF00683510
Mark JE, Allcock HR, West R (2005) Inorganic polymers, 2nd edn. Oxford University Press
Mathew M, Sureshkumar S, Sandhyarani N (2012) Synthesis and characterization of gold–chitosan nanocomposite and application of resultant nanocomposite in sensors. Colloids Surf, B 93:143–147. https://doi.org/10.1016/j.colsurfb.2011.12.028
Mishra UN, Das S, Kandali R (2020) Bioremediation of synthetic polymers: present and future prospects of plastic biodegradation. Int J Curr Microbiol App Sci 9(12):1234–1247. https://doi.org/10.20546/ijcmas.2020.912.152
Olad A, Azhar FF (2014) Eco-friendly biopolymer/clay/conducting polymer nanocomposite: characterization and its application in reactive dye removal. Fibers Polym 15(6):1321–1329. https://doi.org/10.1007/s12221-014-1321-6
Palanisamy S, Thangavelu K, Chen SM, Velusamy V, Chang MH, Chen TW, Al-Hemaid FM, Ali MA, Ramaraj SK (2017) Synthesis and characterization of polypyrrole decorated graphene/β-cyclodextrin composite for low level electrochemical detection of mercury (II) in water. Sens Actuators, B Chem 243:888–894. https://doi.org/10.1016/j.snb.2016.12.068
Pathak S, Jana B, Ghosh MK, Ghorai TK (2017) (C7H7NO4Mo) n: synthesis, characterization and thermal stability of a new oxo-bridged helical-1D-polymer cluster. J Mol Struct 1149:662–668. https://doi.org/10.1016/j.molstruc.2017.08.013
Patil A, Ferritto MS (2013) Polymers for personal care and cosmetics: overview. Polym Pers Care Cosmet 3–11. https://doi.org/10.1021/bk-2013-1148.ch001
Patil SJ, Duragkar N, Rao VR (2014) An ultra-sensitive piezoresistive polymer nano-composite microcantilever sensor electronic nose platform for explosive vapor detection. Sens Actuators, B Chem 192:444–451. https://doi.org/10.1016/j.snb.2013.10.111
Rahimi A, Shokrolahi P (2001) Application of inorganic polymeric materials: I. Polysiloxanes. Int J Inorg Mater 3(7):843–847. https://doi.org/10.1016/S1466-6049(01)00162-3
Rahmat M, Hubert P (2011) Carbon nanotube–polymer interactions in nanocomposites: a review. Compos Sci Technol 72(1):72–84. https://doi.org/10.1016/j.compscitech.2011.10.002
Roy AC, Nisha VS, Dhand C, Ali MA, Malhotra BD (2013) Molecularly imprinted polyaniline-polyvinyl sulphonic acid composite based sensor for para-nitrophenol detection. Anal Chim Acta 777:63–71. https://doi.org/10.1016/j.aca.2013.03.014
Sahu D, Sarkar N, Sahoo G, Mohapatra P, Swain SK (2017) Nano silver imprinted polyvinyl alcohol nanocomposite thin films for Hg2+ sensor. Sens Actuators, B Chem 246:96–107. https://doi.org/10.1016/j.snb.2017.01.038
Schall JD, Edo-Hernandez E (2012) Structure-property investigation of functional resins for UV-curable gaskets. RadTech Rep 26(2):34. https://www.radtech.org/proceedings/2012/papers/Session%209%20-%20Chemistry/JSchall_Henkel.pdf
Shawky HA, Chae SR, Lin S, Wiesner MR (2011) Synthesis and characterization of a carbon nanotube/polymer nanocomposite membrane for water treatment. Desalination 272(1–3):46–50. https://doi.org/10.1016/j.desal.2010.12.051
Sheha RR (2012) Synthesis and characterization of magnetic hexacyanoferrate (II) polymeric nanocomposite for separation of cesium from radioactive waste solutions. J Colloid Interface Sci 388(1):21–30. https://doi.org/10.1016/j.jcis.2012.08.042
Shukla SK, Govender PP, Agorku ES (2016) A resistive type humidity sensor based on crystalline tin oxide nanoparticles encapsulated in polyaniline matrix. Microchim Acta 183(2):573–580. https://doi.org/10.1007/s00604-015-1678-2
Sun F, Lin M, Dong Z, Zhang J, Wang C, Wang S, Song F (2015) Nanosilica-induced high mechanical strength of nanocomposite hydrogel for killing fluids. J Colloid Interface Sci 458:45–52. https://doi.org/10.1016/j.jcis.2015.07.006
Sun Y, Zhu C, Zheng H, Sun W, Xu Y, Xiao X, You Z, Liu C (2017) Characterization and coagulation behavior of polymeric aluminum ferric silicate for high-concentration oily wastewater treatment. Chem Eng Res Des 119:23–32. https://doi.org/10.1016/j.cherd.2017.01.009
Surudžić R, Janković A, Bibić N, Vukašinović-Sekulić M, Perić-Grujić A, Mišković-Stanković V, Park SJ, Rhee KY (2016) Physico–chemical and mechanical properties and antibacterial activity of silver/poly (vinyl alcohol)/graphene nanocomposites obtained by electrochemical method. Compos B Eng 85:102–112. https://doi.org/10.1016/j.compositesb.2015.09.029
Tang Q, Wang K, Yaseen M, Tong Z, Cui X (2018) Synthesis of highly efficient porous inorganic polymer microspheres for the adsorptive removal of Pb2+ from wastewater. J Clean Prod 193:351–362. https://doi.org/10.1016/j.jclepro.2018.05.094
Umamaheswari C, Lakshmanan A, Nagarajan NS (2018) Green synthesis, characterization and catalytic degradation studies of gold nanoparticles against congo red and methyl orange. J Photochem Photobiol, B 178:33–39. https://doi.org/10.1016/j.jphotobiol.2017.10.017
Wan Q, Liu M, Xie Y, Tian J, Huang Q, Deng F, Mao L, Zhang Q, Zhang X, Wei Y (2017) Facile and highly efficient fabrication of graphene oxide-based polymer nanocomposites through mussel-inspired chemistry and their environmental pollutant removal application. J Mater Sci 52(1):504–518. https://doi.org/10.1007/s10853-016-0349-y
Wang D, Duan Y, Luo Q, Li X, An J, Bao L, Shi L (2012) Novel preparation method for a new visible light photocatalyst: mesoporous TiO2 supported Ag/AgBr. J Mater Chem 22(11):4847–4854. https://doi.org/10.1039/C2JM14628B
Wang JP, Yang HC, Hsieh CT (2010) Adsorption of phenol and basic dye on carbon nanotubes/carbon fabric composites from aqueous solution. Sep Sci Technol 46(2):340–348. https://doi.org/10.1080/01496395.2010.508066
World Health Organization (1993) Guidelines for drinking-water quality. World Health Organization
Yang DF, Kong XJ, Gao D, Cui HS, Huang TT, Lin JX (2017) Dyeing of cotton fabric with reactive disperse dye contain acyl fluoride group in supercritical carbon dioxide. Dyes Pigm 139:566–574. https://doi.org/10.1016/j.dyepig.2016.12.050
Zhou K, Wu B, Dai X, Chai X (2018) Development of polymeric iron/zirconium-pillared clinoptilolite for simultaneous removal of multiple inorganic contaminants from wastewater. Chem Eng J 347:819–827. https://doi.org/10.1016/j.cej.2018.04.104
Zhou L, Zhou H, Yang X (2019) Preparation and performance of a novel starch-based inorganic/organic composite coagulant for textile wastewater treatment. Sep Purif Technol 210:93–99. https://doi.org/10.1016/j.seppur.2018.07.089
Zhu HY, Jiang R, Fu YQ, Jiang JH, Xiao L, Zeng GM (2011) Preparation, characterization and dye adsorption properties of γ-Fe2O3/SiO2/chitosan composite. Appl Surf Sci 258(4):1337–1344. https://doi.org/10.1016/j.apsusc.2011.09.045
Zhu HY, Jiang R, Xiao L, Li W (2010) A novel magnetically separable γ-Fe2O3/crosslinked chitosan adsorbent: preparation, characterization and adsorption application for removal of hazardous azo dye. J Hazard Mater 179(1–3):251–257. https://doi.org/10.1016/j.jhazmat.2010.02.087
Zhu HY, Jiang R, Xiao L, Zeng GM (2010) Preparation, characterization, adsorption kinetics and thermodynamics of novel magnetic chitosan enwrapping nanosized γ-Fe2O3 and multi-walled carbon nanotubes with enhanced adsorption properties for methyl orange. Biores Technol 101(14):5063–5069. https://doi.org/10.1016/j.biortech.2010.01.107
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Prashanth, G.K., Dileep, M.S., Prashanth, P.A., Gadewar, M., Nagabhushana, B.M., Prabhu, S.R.B. (2022). Applications of Inorganic Polymers in Textile Wastewater Treatment. In: Khadir, A., Muthu, S.S. (eds) Polymer Technology in Dye-containing Wastewater. Sustainable Textiles: Production, Processing, Manufacturing & Chemistry. Springer, Singapore. https://doi.org/10.1007/978-981-19-0886-6_10
Download citation
DOI: https://doi.org/10.1007/978-981-19-0886-6_10
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-0885-9
Online ISBN: 978-981-19-0886-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)