Skip to main content
SpringerLink
Log in

Effects of Process Parameters on the Dissimilar Friction Stir Welded Joints Between Aluminum Alloy and Polycarbonate

  • Conference paper
  • First Online:
Research and Education: Traditions and Innovations (INTER-ACADEMIA 2021)

Part of the book series: Lecture Notes in Networks and Systems ((LNNS,volume 422))

Included in the following conference series:

  • 246 Accesses

Abstract

Effects of processing parameters on weld interface and material flow during friction stir welding of dissimilar materials were investigated. The tapered cylindrical tool pin made of SKD11 was used to improve the in-process material flow behaviors during the process. In the experiments 3 mm thick plates of AA2017 aluminum alloy and polycarbonate were used as materials for welding at a tool rotation speed of 1320 or 1760 rpm, travel speed of 60 mm/min, and tool offset of 2, 3 or 4 mm toward AA2017. From the experiments, it was found the suitable process parameters for the butt welded joint, between the AA2017 and polycarbonate.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 149.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 199.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Derazkola, H.A., Elyasi, M.: The influence of process parameters in friction stir welding of Al-Mg alloy and polycardonate. J. Manuf. Process. 35, 88–98 (2018)

    Article  Google Scholar 

  2. Moshwan, R., Sahifulddin, M., Yusof, F.: Dissimilar friction stir welding between polycarbonate and AA7075 aluminum alloy. Int. J. Mater. Res 105, 1–9 (2014)

    Article  Google Scholar 

  3. Derazkola, H.A., Fard, R.K., Khodabakshi, F.: Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA Polymer. Inst. Welding 62, 117–130 (2018)

    Article  Google Scholar 

  4. Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J., Feng, J.: Friction stir welding/processing of polymers and polymer matrix. Compos. Part A Appl. Sci. Manuf. 105, 235–257 (2018)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Graduate School of Science and Technology, Shizuoka University, Hamamatsu, 432-8011, Japan

    A. Azhagar & K. Hayakawa

  2. Department of Mechanical Engineering, Shizuoka University, Hamamatsu, 432-8561, Japan

    K. Sakai & H. Shizuka

Authors
  1. A. Azhagar
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. K. Sakai
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. H. Shizuka
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. K. Hayakawa
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. Azhagar .

Editor information

Editors and Affiliations

  1. Francisk Skorina Gomel State University, Gomel, Belarus

    Sergei Khakhomov

  2. Francisk Skorina Gomel State University, Gomel, Belarus

    Igor Semchenko

  3. Francisk Skorina Gomel State University, Gomel, Belarus

    Oleg Demidenko

  4. Dean of the Faculty of Physics and Information Technologies, Francisk Skorina Gomel State University, Gomel, Belarus

    Dmitry Kovalenko

Rights and permissions

Reprints and permissions

Copyright information

© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Azhagar, A., Sakai, K., Shizuka, H., Hayakawa, K. (2022). Effects of Process Parameters on the Dissimilar Friction Stir Welded Joints Between Aluminum Alloy and Polycarbonate. In: Khakhomov, S., Semchenko, I., Demidenko, O., Kovalenko, D. (eds) Research and Education: Traditions and Innovations. INTER-ACADEMIA 2021. Lecture Notes in Networks and Systems, vol 422. Springer, Singapore. https://doi.org/10.1007/978-981-19-0379-3_13

Download citation

Publish with us

Policies and ethics

Search

Navigation