Abstract
Most of the residential buildings were built without following the requirements specified in the design Code of earthquake-resistant building. Such non-engineering buildings (NEB) are susceptible to seismic hazard. Beam-column joint failure is a typical example of structural failure in NEB induced by seismic load. Strengthening of the beam-column joint by mean of external steel plate is expected to increase the seismic performance of NEB. This study aims to find the most effective plate width as a strengthening material for the beam-column joint. ATENA software will be used for the investigation. The structural model is portal structure without strengthening as a control, namely the PU-200 model and with an external steel plate, namely PUP-200 with various width of plates. From the results of the analysis, it is found that strengthening joint with a plate width of 50 mm has better performance than plate widths of 100 mm and 150 mm. The increase performance is quantified in term of increase of load by 14.60%, reduction of displacement by 18.43% and reduction of crack width by 23.65%.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Boen T (2001) Earthquake resistant design of non-engineered buildings. In: Indonesia1 Earthquake Resistant Design of Non-Engineered Buildings In Indonesia 1
Park S, Mosalam KM (2012) Parameters for shear strength prediction of exterior beam-column joints without transverse reinforcement. Eng Struct 36:198–209. https://doi.org/10.1016/j.engstruct.2011.11.017
Alaee P, Li B (2017) High-strength concrete exterior beam-column joints with high-yield strength steel reinforcements. Eng Struct 145:305–321. https://doi.org/10.1016/j.engstruct.2017.05.024
Faleschini F, Hofer L, Zanini MA, dalla Benetta M, Pellegrino C (2017) Experimental behavior of beam-column joints made with EAF concrete under cyclic loading. Eng Struct 139:81–95. https://doi.org/10.1016/j.engstruct.2017.02.038
Ricci P, De Risi MT, Verderame GM, Manfredi G (2016) Experimental tests of unreinforced exterior beam-column joints with plain bars. Eng Struct 118:178–194. https://doi.org/10.1016/j.engstruct.2016.03.033
Barbhuiya S, Choudhury AM (2015) A study on the size effect of RC beam-column connections under cyclic loading. Eng Struct 95:1–7. https://doi.org/10.1016/j.engstruct.2015.03.052
Unal M, Burak B (2013) Development and analytical verification of an inelastic reinforced concrete joint model. Eng Struct 52:284–294. https://doi.org/10.1016/j.engstruct.2013.02.032
Shafaei J, Zareian MS, Hosseini A, Marefat MS (2014) Effects of joint flexibility on lateral response of reinforced concrete frames. Eng Struct 81:412–431. https://doi.org/10.1016/j.engstruct.2014.09.046
Deng Y et al (2021) Experimental and analytical investigation on flexural behaviour of RC beams strengthened with NSM CFRP prestressed concrete prisms. Compos Struct 257:113385. https://doi.org/10.1016/j.compstruct.2020.113385
Hadi MNS, Tran TM (2014) Retrofitting nonseismically detailed exterior beam–column joints using concrete covers together with CFRP jacket. Constr Build Mater 63:161–173. https://doi.org/10.1016/j.conbuildmat.2014.04.019
Esmaeeli E et al (2015) Retrofitting of interior RC beam–column joints using CFRP strengthened SHCC: cast-in-place solution. Compos Struct 122:456–467. https://doi.org/10.1016/j.compstruct.2014.12.012
Thirumalini S, Shanmugapriya, Atchaya (2021) Experimental and numerical investigation of short GFRP-reinforced steel tubular short columns. Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.11.103
Rahmi Y, Saputra A, Siswosukarto S (2017) Numerical modelling of interior RC beam-column joints for non-engineered buildings strengthened using steel plates. In: MATEC Web Conference, vol 138. https://doi.org/10.1051/matecconf/201713802007
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Purwanto, E., Adri, P.A., Kristiawan, S.A., Sangadji, S., Alfisa, S.H. (2023). Strengthening of Non-engineered Building Beam-Column Joint to Increase Seismic Performance with Variation of Steel Plate Width. In: Kristiawan, S.A., Gan, B.S., Shahin, M., Sharma, A. (eds) Proceedings of the 5th International Conference on Rehabilitation and Maintenance in Civil Engineering. ICRMCE 2021. Lecture Notes in Civil Engineering, vol 225. Springer, Singapore. https://doi.org/10.1007/978-981-16-9348-9_19
Download citation
DOI: https://doi.org/10.1007/978-981-16-9348-9_19
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-9347-2
Online ISBN: 978-981-16-9348-9
eBook Packages: EngineeringEngineering (R0)