Abstract
The use of high-strength sand concrete (HSSC) is an alternative to high-strength crushed stone concrete. Its use is economically viable for those regions of Russia in which crushed stone belongs to imported building materials. So, crushed stone is supplied to the Republic of Tatarstan from the Ural, and local sand reserves are significant. Authors give the information on the cost-effectiveness of designing prefabricated and monolithic flat shells of positive Gaussian curvature from HSSC of B60 and B80 classes compared to heavy concrete of B25-B80 classes. The determination of the forces in the shell elements was performed by using the LIRA-CAD software package (SP). The calculation of the elements of prefabricated shells was carried out by an engineering method using current standards in the stages of operation, manufacture, transportation and installation. The calculation of the elements of monolithic shells was carried out using the LIRA-CAD SP. The density of heavy concrete, its strength and deformation characteristics were taken according to the standards. The same characteristics for HSSC were based on the results of the experiments of the department “Technology of building materials, products and structures” (TBMPS) of the Kazan State University of Architecture and Engineering (KSUAE).
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Skripnikova, N.K., Shekhovtsov, V.V., Grigorevskaya, D.K., Semenovykh, M.A., Yur’ev, I.Yu.: Small-grain concrete based on metallurgy waste. J. Constr. Archit. 21(2), 185–191 (2019)
Borovskikh, I.V., Morozov, N.M., Iskandarova, A.F.: Fine concrete for concrete paving. Int. Sci. J. (Symbol of Science) 8, 39–41 (2016)
Van Lam, T., Bulgakov, B.I., Alexandrova, O.V.: Mathematical modeling of the impact of raw material composition on compressive strength of high performance fine-grained concrete. In: Proceedings of the Moscow State University of Civil Engineering, vol. 12, issue 9(108), pp. 999–1009 (2017)
Ilyina, L.V., Khakimullina, S.A., Kadorkin, D.A.: Influence of dispersed mineral additives strength fine concrete. Fundam. Res. 4, 34–38 (2017)
Lukuttsova, N.P., Pashayan, A.A., Khomyakova, E.N.: Study of the effect of additives based on etching solutions containing iron salts on the structure and strength of fine-grained concrete. Proc. Moscow State Univ. Civil Eng. 1, 94–104 (2016)
Andreeva, A.V., Burenina, O.N., Davydova, N.N., Davaasenge, S.S., Savvinova, M.E.: Fine concrete in winter concreting. Volga Sci. Bull. 12–1(52), 19–23 (2015)
Bazhenov, Yu.M., Lukuttsova, N.P., Karpikov, E.G.: Thin concrete modified with a complex micro dispersed additive. Proc. Moscow State Univ. Civil Eng. 2, 94–100 (2013)
Alsalman, A., Dang, C., Micah Hale, W.: Development of ultra-high performance concrete with locally available materials. Constr. Build. Mater. 133, 135–145 (2017)
Hasdemir, S., Turul, A., Yilmaz, M.: The effect of natural sand composition on concrete strength. Constr. Build. Mater. 112, 940–948 (2016)
Musafirova, G.Ya., Musafirov, E.V.: Performance assessment of the developed fine-grained concrete modified with a waterproofing compound “HYDROPEN PLAG”. In: Materials of the XX International Scientific and Methodological Seminar, pp. 279–281 (2016)
Shen, W., Liu, Y., Cao, L., Huo, X., Yang, Z., Zhou, C., He, P., Lu, Z.: Mixing design and microstructure of ultra-high strength concrete with manufactured sand. Constr. Build. Mater. 143, 312–321 (2017)
Xiao, J., Qiang, C., Nanni, A., Zhang, K.: Use of sea sand and seawater in concrete construction: current status and future opportunities. Constr. Build. Mater. 155, 1101–1111 (2017)
Smolyakov, A.: Influence in cement of mineral additives from milked natural sand and granite balance on the properties of heavy concrete. In: Contemporary Issues of Concrete and Reinforced Concrete: Collected Research Papers, vol. 11, pp. 271–287. Minsk. Institute BelNIIS (2019)
Potapov, Yu.B., Barabash, D.E., Rogatnev, Yu.F., Panfilov, D.V., Mehdi, J.M.: Defection calculation of reinforced concrete flexural elements with the top layer made of high quality concrete. Proc. Moscow State Univ. Civil Eng. 3, 26–36 (2016)
Belostotskii, A.M., Akimov, P.A.: Analysis of parameters of mechanical safety of high-rise (404-meter) residential building (One Tower) in the Moscow international business center. Int. J. Comput. Civ. Struct. Eng. 12(1), 8–45 (2016)
Akhtyamov, V.F., Khafzova, E.N.: Influence of technological non-metallic production wastes on heavy weight concrete properties, vol. 15, № 2, Continuous issue 60, 261–268 (2018)
Paulava, I., Belamesava, K.: Dependence of concrete strength on different methods of basalt fibre addicting. In: Contemporary Issues of Concrete and Reinforced Concrete: Collected Research Papers, Institute BelNIIS, vol. 11, pp. 63–75 (2019) (Minsk, 2019)
Hamdy, G.A., Ahmed, H.E.H., Barakat, A.Y.Y., Mostafa, M.A.: Experimental investigation of self-compacting concrete beams with nano materials additives. Intellekt. Sist. Proizv. 17(3), 20 (2019)
Belogurova, O.A., Savarina, M.A., Sharay, T.V.: Refractory concrete from waste from the Kovdorsky GOK on a magnesium phosphate binder. In: Proceedings of the Fersman Scientific Session of the Scientific Center of the Russian Academy of Sciences, vol. 16, pp. 18–22 (2019)
Palagin, N., Dul’miyeva, A.: Cost-effective design of long cylindrical shells of high-strength sand concrete. IOP Conf. Ser. Mater. Sci. Angl. 890, 012078 (2020)
Bazhenov, Yu.M., Demyanova, V.S., Kalashnikov, V.I.: Modified High-Quality Concrete. DIA, Moscow (2006)
Lvovich, K.I.: Sand Concrete and Its Use in Construction. Stroy-Beton, St. Petersburg (2007)
Morozov, N.M., Khozin, V.G., Muginov, H.G.: Features of the formation of the structure of modified sand concrete. Build. Mater. J. 9, 72–73 (2010)
Kalashnikov, V.I.: Evolution of the development of compositions and changes in the strength of concrete. Concretes of the present and future. Build. Mater. J. 1–2, 96–103 (2016)
Nizina, T.A., Ponomarev, A.N., Balykov, A.S.: Fine-grained dispersed reinforced concrete based on complex modifying additives. Build. Mater. Mag. 9, 68–72 (2016)
Morozov, N.M., Muginov, N.G., Khozin, V.G., Antakov, A.B.: High-strength sand concrete for monolithic construction. Izvestiya KGASU 2, 183–188 (2012)
Aïtchin, P.C., Neville, A.: High: performance concrete demystified. Cons. Internet. 15(1), 21–26 (1993)
Edward, G., Navy, P.: Fundaments of High Performance Concrete, 2nd edn. Wiley (2001)
Kaprielov, S.S., Travush, V.I., Karpenko, N.I., Sheinfield, A.V., Kardumyan, G.S., Kiseleva, Yu.A., Prigozhenko, O.V.: Modified high-strength concrete of classes B80 and B90 in monolithic structures. Build. Mater. Mag. 3, 9–13 (2008)
Ilyukhina, E.A., Lakhman, S.I., Miller, A.B., Travush, V.I.: Constructive solutions of the high-rise building (Lakhta Center) in St. Petersburg. J. (Constr. Sci.) 3, 110–121 (2019)
Kaprielov, S.S., Sheinfield, A.V., Kardumyan, G.S., Dondukov, V.G.: Modified high-strength fine-grained concrete with improved deformation characteristics. Concr. Reinf. Concr. 2, 2–7 (2006)
Khozin, V.G., Khanifov, F.M.: Strategy for the innovative development of concrete construction in the Republic of Tatarstan. In: International Scientific and Technical Conference “High-Strength Concrete: Technology, Construction, Economics (HSC–2016)”, pp. 10–12. KSUAE. Kazan (2016)
Mirsayapov, I.L., Nikitin, G.P., Simakov, V.D.: The use of high-strength concrete of B80 class for the supporting system of an 18-storey residential building in the “Salavat Coopere” complex. Izvestiya KGASU 3(45), 145–152 (2018)
Palagin, N.G., Trunov, A.N.: Production of solid columns of one-story industrial buildings with overhead cranes from high-strength sand concrete and its economic efficiency. Engineering staff—the future of the innovative economy of Russia: materials of the VI All-Russian. student conf (Yoshkar-Ola, November 10–13, 2020): at 8 o’clock. Part 5: Innovations in construction, environmental management and technosphere safety. Yoshkar-Ola: LLC “Vertola”, pp. 78–81 (2020)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Palagin, N., Nikitin, G., Sadrutdinova, A. (2022). Erection of Flat Shells of Positive Gaussian Curvature Made from High-Strength Sand Concrete and Its Economic Efficiency. In: Vatin, N.I., Tamrazyan, A.G., Plotnikov, A.N., Leonovich, S.N., Pakrastins, L., Rakhmonzoda, A. (eds) Advances in Construction and Development. CDLC 2020. Lecture Notes in Civil Engineering, vol 197. Springer, Singapore. https://doi.org/10.1007/978-981-16-6593-6_11
Download citation
DOI: https://doi.org/10.1007/978-981-16-6593-6_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-6592-9
Online ISBN: 978-981-16-6593-6
eBook Packages: EngineeringEngineering (R0)