Abstract
In this study, we have designed and developed a ribbed type solar air heater on the basis of theoretical studies. After the successful development of solar air heater, we have carried out some experimental result like outlet temperature and velocity of air. On the basis of experimental study, we have found that the temperature improvement is about 30–40 °C at free convection. The impact of temperature on mass flow rate, heat transfer rate and mass flow rate on pressure drop, friction factor, Reynolds number and Nusselt number is investigated. A significant enhancement is found in Thermal efficiency due to the ribs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- A :
-
Surface area (m2)
- M :
-
Mass flow rate (kg/s)
- T :
-
Temperature (°C)
- V :
-
Velocity (m/s)
- d e :
-
Equivalent diameter (m)
- L :
-
Length of absorber plate (m)
- Q :
-
Heat transfer rate (W)
- Υ :
-
Kinematic viscosity (m2/s)
- F :
-
Friction coefficient
- δP :
-
Pressure loss (N/m2)
- Ρ :
-
Density (kg/m3)
- R e :
-
Reynolds number
- N u :
-
Nusselt number
- C p :
-
Specific heat of air (kJ/kg K)
- In :
-
Inlet (Tin = temperature of absorber plate at inlet)
- Out :
-
Outlet (Tout = temperature of absorber plate at outlet)
- RSAH :
-
Ribbed solar air heater
- MFR :
-
Mass flow rate
References
Forson FK, Nazha MA, Rajakaruna H (2003) Experimental and simulation studies on a single pass, double duct solar air heater. Energy Convers Manage 44(8):1209–1227
Mittal MK, Varun, Saini RP, Singhal SK (2007) Effective efficiency of solar air heaters having different types of roughness elements on the absorber plate. Energy 32:739–745
Ramadan MRI, El-Sebaii AA, Aboul-Enein S, El-Bialy E (2007) Thermal performance of a packed bed double-pass solar air heater. Energy 32:1524–1535
Saini RP, Verma J (2008) Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters. Energy 33:1277–1287
Esen H (2008) Experimental energy and exergy analysis of a double flow solar air heater having different obstacles on absorber plates. Build Environ 43:1046–1054
Kumar A, Bhagoria JL, Sarviya RM (2009) Heat transfer and friction correlations for artificially roughened solar air heater duct with discrete W-shaped ribs. Energy Convers Manage 50:2106–2117
Lanjewar AM, Bhagoria JL, Sarviya RM (2010) Heat transfer enhancement in solar air heater. Indian J Sci Technol 3(8):908–910
Chabane F, Moummi N, Benramache S, Bensahal D, Belahassen O, Lemmadi Z (2010) Thermal performance optimization of a flat plate solar air heater using genetic algorithm. Appl Energy 87:1793–1799
Nwosu NP (2010) Employing exergy-optimized pin-fins in the design of an absorber in a solar air heater. Energy 35:571–575
Tanda G (2011) Performance of solar air heater duct with different types of ribs on the absorber plate. Energy 36:6651–6660
Chabane F, Moummi N, Benramache S (2014) Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater. J Adv Res 5:183–192
Bouadila S, Lazaar M, Skouri S, Kooli S, Farhat A (2014) Energy and exergy analysis of a new solar air heater with latent storage energy. Int J Hydrogen Energy 39:15266–15274
Saxena A, Srivastava G, Tirth V (2015) Design and thermal performance evaluation of a novel solar air heater. Renew Energy 77:501–511
Abed QA, Badescu V, Soriga I (2017) Performance of a hybrid solar collector system in days with stable and less stable radiative regime. Int J Sustain Eng. https://doi.org/10.1080/19397038.2017.1333542
Ansari M, Bazargan M (2018) Optimization of flat plate solar air heater with ribbed surfaces. Appl Therm Energy. https://doi.org/10.1016/j.applthermaleng.2018.02.099
Hassan H, Saleh AE, El-Dosoky MF (2019) An experimental investigation of the performance of new design of solar air heater (tubular). Renew Energy. https://doi.org/10.1016/j.renene.2019.11.112
Saleh AE, Hassan H, El-Dosoky MF (2020) Study of the performance of double pass solar air heater of a new designed absorber: an experimental work. Sol Energy 198:479–489
Acknowledgements
This work was supported by the collaborative project scheme (CRS) fund under NATIONAL PROJECT IMPLEMENTATION UNIT (NPIU) (A Unit of MHRD, Govt. of India for Implementation of World Bank Assisted Projects in Technical Education) [CRS Project ID: 1-5728003471].
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, N., Singh, M.K., Yadav, V.S., Singh, V., Maheswari, A. (2022). An Experimental Investigation of Ribbed Solar Air Heater—Free Convection. In: Agrawal, R., Jain, J.K., Yadav, V.S., Manupati, V.K., Varela, L. (eds) Recent Advances in Industrial Production. ICEM 2020. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-5281-3_35
Download citation
DOI: https://doi.org/10.1007/978-981-16-5281-3_35
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-5280-6
Online ISBN: 978-981-16-5281-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)