Abstract
The cell morphology of polymer foam shows an essential role in its functional attributes and its lightweight and thermal dependency cause diverse applications in building, utility lines, and road structures. The most used polymer materials are flexible, structural, and speciality foams. Phenolic foam, a member of speciality foam family, is produced through curing and expanding process with a composition of phenolic resin, surfactant, curing catalyst, and blowing agent. The characteristics of phenolic foams (PF) in absorbing liquids and dissipating energy through collisions and shocks urge its application in road construction and airfield pavements. This chapter discusses the physical properties and the usages and benefits of PF for road and airfield pavements in cold regions. The PF provides thermal efficiency and soft ground arrestor in pavements avoiding the over running of vehicles and aircraft. The open cell PF, as a geotextile layer in the permeable pavement systems (PPS), has also potential to retain and harvest rainwater. The PF layer under the porous friction asphalt of PPS delays the peak flow of rainwater during extreme rainfall events and minimizes the flooding risk.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Advanced market analysis (2020) Phenolic foam market segmented into XX submarkets. Available via: https://www.advancemarketanalytics.com/reports/31925-global-phenolic-foam-market [Accessed 23 May 2020]
Atkin GW, Berg RL (1968) Digital solution of modified Berggren equation to calculate depths of freeze or thaw in multilayered systems. Special report 122. Cold Regions Research and Engineering Laboratory, Engineer Research and Development Center, USA. Available via http://hdl.handle.net/11681/11899
Ayres M, Shirazi H, Carvalho R et al (2013) Modelling the location and consequences of aircraft accidents. Safety Sci 51(1):178–186
Bade E (1968) Soft-ground arresting of civil aircraft, Ministry of Technology, Royal Aircraft Establishment, Farnborough
Baladi G, Rajaei P (2015) Predictive modeling of freezing and thawing of frost susceptible soils. Final Report, RC-1619. Michigan Department of Transportation. Available via https://www.michigan.gov/documents/mdot/RC1619_500351_7.pdf
BarnesJ (1971) Development of a model technique for investigating the performance of soft-ground arresters for aircraft, CiteseerX.
Bianchini A, Gonzalez C (2012) Pavement-transportation computer assisted structural engineering (PCASE) implementation of the modified berggren (ModBerg) equation for computing the frost penetration depth within pavement structures. TR-12–15. Geotechnical and Structural Laboratory. U.S. Army Corps of Engineers
Boutonnet M, Lerat P, Saint-Laurent D et al (2003) Thermal aspect of frost-thaw pavement dimensioning: in situ measurement and numerical modeling. Paper No. 03–2657, pp 1–23. 82nd Annual Meeting. Transportation Research Board. Washington, DC
Brownstein JB (1998) An investigation of the potential for the biodegradation of motor oil within a model permeable pavement. Unpublished PhD thesis, Coventry University, UK
Cook RF (1993) Soft-ground arresting system for commercial aircraft, Universal Energy Systems, Dayton, 1993 Final Report
Coppock V, Zeggelaar R, Takahashi H et al (2013) Phenolic foam. US patent no. 20130072589A1
Eaves D (2004) Handbook of polymer foams. Shawbury: Rapra Technology.
Esch D (1969) Subgrade insulation for frost heave control construction, instrumentation, and first year summary. State of Alaska, Department of Highways Materials Division. Available at http://www.dot.state.ak.us/stwddes/research/assets/pdf/esch_jun1969.pdf
FAA (Federal Aviation Administration) (2020) Fact sheet—engineered material arresting system (EMAS). Avaliable via https://www.faa.gov/news/fact_sheets/news_story.cfm?newsId=13754 [Accessed 12 July 2020]
Federal Aviation Administration (2005) AC 150/5220–22A engineered materials arresting aystems (EMAS for Aircraft Overruns)
Freitag DR, McFadden T (1997) Introduction to cold regions engineering. The American Society for Civil Engineers
Frydenlund TE, Aabøe RO (2003) Foam glass—a new vision in road construction. In: Paper presented in proceedings of the 22nd PIARC—C12 technical committee on earthworks, drainage and subgrade. Durban, South Africa, 2003
Gardziella A, Pilato L, Knop A (1999) Phenolic resins, 2nd edn. Springer-Verlag Berlin Heidelberg New York in 2000, Springer
Gong W, Fu H, Zhang C et al (2018) Study on foaming quality and impact property of foamed polypropylene composites. Polym 10(12):1375
Hartzer R (1993) From sandbags to MAAS, aircraft arresting systems, Air Force Civil Eng Mag
Heweidak M, Amin S (2019) Effects of OASIS® phenolic foam on hydraulic behaviour of permeable pavement systems. J Environ Manage 230:212–220
Heymsfield E, Halsey TL (2008) Sensitivity analysis of engineered material arrestor systems to aircraft and arrestor material characteristics. Transp Res Rec J Transp Res Board 2052(1):110–117
Ho CH, Romero P (2009) Investigation of existing engineered material arresting system at three U.S. Airports. In: 50th Annual Transportation Research Forum 2009. 50th Annual Transportation Research Forum 2009, vol. 1, pp. 510–524, 50th Annual Transportation Research Forum 2009, Portland, OR, United States, 3/16/09
Horne T (2019) from the editor: overrun the perils of too high, too fast. Available via: AOPA.https://www.aopa.org/news-and-media/all-news/2019/april/pilot/from-the-turbine-editor-overrun. Accessed 22 Jul 2020
Janoo VC, Berg RL (1996) PCC airfield pavement response during thaw-weakening periods—a field study. Special Report 96–12. CRREL, US Army Corps of Engineers
Johnson AE (2012) Freeze-thaw performance of pavement foundation materials. Iowa State University, Ames, Iowa, Master of Science
Landrock AH (1995) Handbook of plastic foams: types, properties, manufacture, and applications. Park Ridge, N.J., U.S.A.: Noyes Publications
Li Y, Sun Y, Zhuang Y et al (2020) Thermal conductivity characteristics of thermal insulation materials immersed in water for cold-region tunnels. Adv Mater Sci Eng 2020:1–15
Newman AP, Nnadi EO, Duckers LJ et al (2011) Further developments in self-fertilizing geotextiles for use in pervious pavements. Water Sci Technol 64(6):1333–1339
Nnadi EO, Coupe S, J, Sañudo-Fontaneda LA et al (2014) An evaluation of enhanced geotextile layer in permeable pavement to improve stormwater infiltration and attenuation. Int J Pavement Eng 15(10):925–932
Nnadi EO (2009) An evaluation of modified pervious pavements for water harvesting for irrigation purposes. Unpublished PhD Thesis. Coventry University, UK
Obi BE (2017) Polymeric foams structure-property-performance: a design guide. William Andrew, Oxford
Penner E (1967) Experimental pavement structures insulated with a polyurethane and extruded polystyrene foam. In: Proceedings-International Conference on Low Temperature Science, Hokkaido University, Sapporo, Japan
Pratt C, Newman A, Bond P (1999) Mineral oil bio-degradation within a permeable pavement: long term observations. Water Sci Technol 39:103–109
Rastegar J, Ge J (2005) Roadway for decelerating and/or accelerating a vehicle including an aircraft. US patent no. 6969213B2
San-Filippo WK, Delong H (2002) Engineered materials arresting system: an alternative solution to runway overruns. In: Sproule W, Jansen S (eds) Proceedings of the 27th international air transport conference 2002. p 257e65
Santagata E, Bassani M, Sacchi E (2010) Performance of new materials for aircraft arrestor beds. Transp Res Rec J Transp Res Board 2177(1):124–131
Scholz M (2013) Water quality improvement performance of geotextiles within permeable pavement systems: a critical review. Water 5(2):462–479
Scholz M, Grabowiecki P (2009) Combined permeable pavement and ground source heat pump systems to treat urban runoff. J Chem Technol Biotechnol 84(3):405–413
Simonsen E, Isacsson U (1999) thaw weakening of pavement structures in cold regions. Cold Reg Sci Technol 29(2):135–151
Skybrary (2019) Engineered materials arresting aystem. Available online https://www.skybrary.aero/index.php/Engineered_Materials_Arresting_System_(EMAS) Accessed 12 Jul 2020
Steyn WJ, Lombard S, Horak E (2016) Foamed concrete-based material as a soft ground arresting system for runways and airfields. J Perform Constructed Facil 30(1):1943–5509.0000692
Tan X, Chen W, Wu G et al (2013) Numerical simulations of heat transfer with ice–water phase change occurring in porous media and application to a cold-region tunnel. Tunneling and underground space technology 38:170–179
Wang G, Zhao G, Zhang L et al (2018) Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding. Chem Eng J 350:1–11
White DJ, Vennapusa KR, Zhang Y et al (2016) Assessment of seasonal variations in concrete pavement foundation layers—multiple test sections in Iowa. In: Trans Project 09–352 Report. Iowa State University. Ames, IA
White JC, Agrawal SK (1993) Final report soft ground arresting system for airports, federal aviation administration, Washington, DC
Wilson S, Bray B, Cooper P (2004) Sustainable drainage systems, 1st edn. CIRIA, London, UK
Woods-Ballard B, Kellagher R, Martin P et al (2007) The SUDS manual, no C697. London, UK: Construction Industry and Research Association (CIRIA)
Wypych G (2017) Handbook of foaming and blowing agents. Chemtec Publishing, Toronto
Yang X, Xing Y, Zhang Z et al (2017) Theoretical analysis and multi-objective optimisation for gradient engineering material arresting system. Int J Crashworthiness 22(5):541–555
Yang X, Zhang Z, Xing Y et al (2017) A new theoretical model of aircraft arresting system based on polymeric foam material. Aerosp Sci Technol 66:284–293
Yong CF, Deletic A, Fletcher TD et al (2008) The clogging behaviour and treatment efficiency of a range of porous pavements. In: Proceedings of the 11th International Conference on Urban Drainage (ICUD). Edinburgh, Scotland
ZODIAC Aerospace (2011) EMASMAX™ aircraft arresting systems for runway overrun protection ICAO—global runway safety symposium montreal. Available via https://www.icao.int/safety/RunwaySafety/GRSS2011/Documentation/Docs/ESCO%20Zodiac%20Aerospace%20Solutions%20Workshop%20Presentation.pdf
Zhou D, Xiong Y, Yuan H et al (2019) Synthesis and compressive behaviours of PMMA microporous foam with multi-layer cell structure. Compos Part B Eng 165:272–278
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Amin, S., Heweidak, M. (2022). Phenolic Foams: The Insulating Materials to Reduce the Frost Penetration, Skidding, and Flooding Risk of Road and Airfield Pavements. In: P.K, S., M.S., S., Thomas, S. (eds) Phenolic Based Foams. Gels Horizons: From Science to Smart Materials. Springer, Singapore. https://doi.org/10.1007/978-981-16-5237-0_20
Download citation
DOI: https://doi.org/10.1007/978-981-16-5237-0_20
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-5236-3
Online ISBN: 978-981-16-5237-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)