Abstract
Plasma cladding is one of the methods which is widely applied in surface modification, reconstruction, and repair. Plasma arc welding produces high-quality weld deposit without spatter and minimal porosity, and it is a desirable process for cladding. Copper coating on stainless steel is in demand for the applications like fusion reactors and nuclear storage bins where fast dissipation of heat is required. In this study, copper deposition was made on a stainless steel 316L cylindrical surface by utilizing the full advantage of plasma. The relation between optimum parameters and geometrical characteristics was analyzed. This prefatory study establishes the feasibility and influence of processing parameters for pure copper cladding deposition on a cylindrical stainless steel 316L, using plasma arc welding. The results show successful deposition of thick cladding of copper over stainless steel 316L. The geometrical and structural integrity of plasma cladded copper presented with mean micro-hardness of the SS316L part was 198 HV, while the mean micro-hardness of the copper part cladding was 106 HV.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lee, J.W., Nishio, M., Katoh, T., Yamaguchi, K., Mishima, F.: The performance of wear resistance cladding layer on a mild steel plate by electric resistance welding. Weld. World 49(9/10), 94–101 (2005)
Chen, H., Chen, P.N., Hua, P.H., Chen, M.C., Chang, Y.Y., Wu, W.: Microstructure and abrasive wear properties of Fe-Cr-C hardfacing alloy cladding manufactured by gas tungsten arc welding (GTAW). J. Metal Mater. Int. 19(1), 93–98 (2005)
Sexton, C.L.: Rapid Alloy Scanning by Laser Cladding. Shaker, Aachen (1995)
Magnabosco, I., Ferro, P.S., Bonollo, T., Arnberg, F.: An investigation of fusion zone micro-structures in electron beam welding of copper-stainless steel. Mater. Sci. Eng. A 424, 163–173 (2006)
Surinder Singh, F., Manoj Kumar, S., Gurvinder Pal Singh Sodhi, T., Ramesh Kumar Buddu, F., Harpreet Singh, F.: Development of thick copper claddings on SS316L steel for In-vessel components of fusion reactors and copper-cast iron canisters. Fusion Eng. Des. 128, 126–137 (2018)
Loki, K., Barabash, C., Bachmann, P., Chappuis, C.H., Choi, J.-J., Cordier, B., Giraud, Y., Gribov, P., Heitzenroeder, N., Her, G., Johnson, L., Jones, C., Jun, B.C., Kim, E., Kuzmin, D., Loesser, A., Martin, M., Merola, H., Pathak, P., Readman, M., Sugihara, A., Terasawa, Y., Utin, X., Wang, S., Wu, J. Yu.: Design finalization and material qualification towards procurement of the iter vacuum vessel. J. Nucl. Mater. 417, 860–865 (2011)
Heiple, C., Bennett, W, Rising, T.: Embrittlement of several stainless steels by liquid copper and liquid braze alloys. Mater. Sci. Eng. 52, 277–289 (1982)
Palik, E.D. (Ed.): Handbook of Optical Constants of Solids. Academics Press, Orlando (1985)
Engler, S., Ramsayer, R., Poprawe, R.T.: Process studies on laser welding of copper with brilliant green and infrared lasers. Phys. Procedia 12, 339–346 (2011) https://doi.org/10.1016/j.phpro.2011.03.142
Blom, A., Dunias, P., van Engen, P., Hoving, W., Kramer, J.D.: Photon processing in microelectronics and photonics II 2003. SPIE 4977, 493–507 (2003)
Ujihara, K.: Reflectivity of metals at high temperatures. J. Appl. Phys. 43(5), 2376–2383 (1972), https://doi.org/10.1063/1.1661506
Jhavar, S., Paul, Jain, N.K.: Micro-Plasma transferred arc additive manufacturing for die and mold surface remanufacturing. J. Manuf. 68, 1801–1809 (2016). https://doi.org/10.1007/s11837-016-1932-z
Jhavar, S., Jain, N.K.: Daaam International Scientific Book. DAAAM International, Vienna, Austria (2014)
Jhavar, S., Jain, N.K., Paul, C.P.: Enhancement of deposition quality in micro-plasma transferred arc deposition process, Mater. Manuf. Process. 29, 1017–1023 (2014). https://doi.org/10.1080/10426914.2014.892984
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Aditya, C., Gagan, C., Poojith Raj, R., Balaji, V., Srinivasa Chari, V., Jhavar, S. (2022). Plasma Cladding of Copper on Cylindrical SS 316L Surface. In: Natarajan, S.K., Prakash, R., Sankaranarayanasamy, K. (eds) Recent Advances in Manufacturing, Automation, Design and Energy Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-4222-7_17
Download citation
DOI: https://doi.org/10.1007/978-981-16-4222-7_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-4221-0
Online ISBN: 978-981-16-4222-7
eBook Packages: EngineeringEngineering (R0)