Abstract
Oman is a progressive developing country in the Middle East, located at a strategic location. Its GDP growth rate has been negative in 2017 mainly due to the fluctuations in oil prices. The vision 2040 of Oman aims at a stable economy with special attention to the non-oil sectors. The contribution of infrastructure development in the overall GDP of Oman was a record high in the year 2016 at 1.3%, but it is much less than the countries like India (5.6%) and China (8.3%). Infrastructure is an important indicator in the human development index, which is a parameter to rank the developing and developed countries. This study analyzes the GDP of Oman with a focus on infrastructure development. The advances in 3DP technology in construction are discussed with examples of a few 3DP structures. The cost–benefit analysis of the 3DP with the perspective of Oman indicates that sustainable construction and affordable housing is possible at about 25% cost and with a 50% higher rate of construction. The study also reports the environmental impact of conventional and modular construction. A customized 3DP process is proposed for Oman analyzing the cost, time, and economic advantages of the 3DP construction technology.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
3D Printing: The Future of Construction. (2019). https://www.3dnatives.com/en/3d-printing-construction-310120184/.
Aimar, A., Palermo, A., & Innocenti, B. (2019). The role of 3D printing in medical applications: A state of the art. Journal of Healthcare Engineering, 2019. https://doi.org/10.1155/2019/5340616.
All3DP how much does a 3D printed house coast in 2019? (2019). https://all3dp.com/2/3d-printed-house-cost/.
Al-Qutaifi, S., Nazari, A., & Bagheri, A. (2018). Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing. Construction and Building Materials, 176, 690–699. https://doi.org/10.1016/j.conbuildmat.2018.04.195.
Business Live ME. (2019). https://www.businessliveme.com/economy/infrastructure/industry-insights-omans-infrastructure-development-2019/.
Buswell, R. A., Leal de Silv, W. R., Jones, S. Z., & Dirrenberger, J. (2018, June). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research, 112, 37–49. https://doi.org/10.1016/j.cemconres.2018.05.006.
Finance and Commerce, 2019. (2019). https://finance-commerce.com/2019/06/the-carbon-footprint-of-modern-construction-is-huge/.
García de Soto, B., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G., & Adey, B. T. (2018, May). Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall. Automation in Construction, 92, 297–311. https://doi.org/10.1016/j.autcon.2018.04.004.
Hager, I., Golonka, A., & Putanowicz, R. (2016). 3D printing of buildings and building components as the future of sustainable construction? Procedia Engineering, 151, 292–299. https://doi.org/10.1016/j.proeng.2016.07.357.
Hammad, A. W. A., & Akbarnezhad, A. (2017). Modular vs. conventional construction: A multi-criteria framework approach. In ISARC 2017—Proceedings of the 34th International Symposium on Automation and Robotics in Construction (Isarc) (pp. 214–220). https://doi.org/10.22260/isarc2017/0029.
Infra Construction and Equipment Magazine. (2019). https://www.nbmcw.com/report/construction-infra-industry/39828-3-d-printing-in-construction-a-review.html.
Kidwell, J. (2017). Best practices and applications of 3D printing in the construction industry (pp. 1–8). https://digitalcommons.calpoly.edu/cgi/viewcontent.cgi?article=1090&context=cmsp.
Klufallah, M. M. A., Nuruddin, M. F., Khamidi, M. F., & Jamaludin, N. (2014). Assessment of carbon emission reduction for buildings projects in Malaysia—A comparative analysis. In E3S Web of Conferences, 3. https://doi.org/10.1051/e3sconf/20140301016.
Lawson, R. M., & Ogden, R. G. (2010). Sustainability and process benefits of modular construction. In 8th CIB World Building Congress (pp. 38–51). https://www.irbnet.de/daten/iconda/CIB18783.pdf..
Lu, B., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S. (2019). A systematical review of 3D printable cementitious materials. Construction and Building Materials, 207, 477–490. https://doi.org/10.1016/j.conbuildmat.2019.02.144.
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018). Additive manufacturing—A review of 4D printing and future applications. Additive Manufacturing, 24(September 2017), 606–626. https://doi.org/10.1016/j.addma.2018.10.038.
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018). Effect of polypropylene fibre addition on properties of geopolymers made by 3D printing for digital construction. Materials, 11(12). https://doi.org/10.3390/ma11122352.
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143(December 2017), 172–196. https://doi.org/10.1016/j.compositesb.2018.02.012.
Oman Projects, 2019. (2019). https://www.google.com/search?q=cost+of+construction+in+oman&rlz=1C1GGRV_enSA752SA753&oq=cost+of+construction+in+oman&aqs=chrome..69i57.6951j1j8&sourceid=chrome&ie=UTF-8.
Oman Vision 2040. (2019). https://www.2040.om/en/#2040Themes.
Paoletti, I., & Ceccon, L. (2018). The evolution of 3D printing in AEC: From experimental to consolidated techniques. 3D Printing. https://doi.org/10.5772/intechopen.79668.
Paul, S. C., van Zijl, G. P. A. G., & Gibson, I. (2018). A review of 3D concrete printing systems and materials properties: Current status and future research prospects. Rapid Prototyping Journal, 24(4), 784–798. https://doi.org/10.1108/RPJ-09-2016-0154.
Perkins, I., & Skitmore, M. (2015). Three-dimensional printing in the construction industry: A review. International Journal of Construction Management, 15(1), 1–9. https://doi.org/10.1080/15623599.2015.1012136.
Ranjha, S., Kulkarni, A., & Sanjayan, J. (2018, November). 3D construction printing—A review with contemporary method of decarbonisation and cost benefit analysis. In 1st international conference on 3D construction printing (3DcP) (pp. 1–11).
Šerelis, E., Vaitkevičius, V., & Kerševičius, V. (2016). Mechanical properties and microstructural investigation of ultra-high performance glass powder concrete. Journal of Sustainable Architecture and Civil Engineering, 14(1), 5–11. https://doi.org/10.5755/j01.sace.14.1.14478.
Statista. (2019). https://www.statista.com/statistics/566787/average-yearly-expenditure-on-economic-infrastructure-as-percent-of-gdp-worldwide-by-country/.
The 13 best construction 3D printers in 2019. (2019). https://www.aniwaa.com/house-3d-printer-construction/.
Thomas, D. S., & Gilbert, S. W. (2015). Costs and cost effectiveness of additive manufacturing: A literature review and discussion. In Additive manufacturing: Costs, cost effectiveness and industry economics (pp. 1–96). Nova Science Publishers.
Tirth, V., Algarni, S., Agarwal, N., & Saxena, A. (2019). Greenhouse gas emissions due to the construction of residential buildings in Moradabad, India. Applied Ecology and Environmental Research, 17(5), 12111–12126. https://doi.org/10.15666/aeer/1705_1211112126.
Trading Economics. (2019). https://tradingeconomics.com/oman/gdp-growth-annual.
UNDP. (2018). Human development indices and indicators: 2018 statistical update. United Nations Development Programme, 27(4), 123. Retrieved from http://hdr.undp.org/en/content/human-development-indices-indicators-2018-statisticalupdate#text=Human%20Development%20Indices%20and%20Indicators%3A%202018%20Statistical%20update%20is%20being,trends%20in%20human%20development%20indicators.
Wangler, T., & Flatt, R. J. (2019). Correction to: First RILEM International conference on concrete and digital fabrication—Digital concrete 2018. https://doi.org/10.1007/978-3-319-99519-9_31.
Waste Reduction Potential of Offsite Volumetric Construction. (2019). http://www.wrap.org.uk/sites/files/wrap/VOLUMETRIC%20-%20Full%20case%20study.pdf.
Worldometers Oman Population. (2019). https://www.worldometers.info/world-population/oman-population/.
XE Currency Converter. (2019). https://www.xe.com/currencyconverter/convert/?Amount=1&From=OMR&To=USD.
Yossef, M., & Chen, A. (2015). Applicability and limitations of 3D printing for civil structures. In Proceedings of the 2015 Conference on Autonomous and Robotic Construction of Infrastructure (pp. 1–10). Ames, Iowa: Iowa State University. https://www.researchgate.net/publication/277665549_Applicability_and_Limitations_of_3D_Printing_for_Civil_Structures.
Zeltmann, S. E., Gupta, N., Tsoutsos, N. G., Maniatakos, M., Rajendran, J., & Karri, R. (2016). Manufacturing and security challenges in 3D printing. JOM Journal of the Minerals Metals and Materials Society, 68(7), 1872–1881. https://doi.org/10.1007/s11837-016-1937-7.
Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J. (2019). Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction. Materials and Design, 181, 108088. https://doi.org/10.1016/j.matdes.2019.108088.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Tirth, V., Ghori, S.W. (2021). Cost–Benefit Analysis and Environmental Impact Assessment of 3D Printing Applications in Building Construction in Oman. In: Al Mawali, N.R., Al Lawati, A.M., S, A. (eds) Fourth Industrial Revolution and Business Dynamics. Palgrave Macmillan, Singapore. https://doi.org/10.1007/978-981-16-3250-1_5
Download citation
DOI: https://doi.org/10.1007/978-981-16-3250-1_5
Published:
Publisher Name: Palgrave Macmillan, Singapore
Print ISBN: 978-981-16-3249-5
Online ISBN: 978-981-16-3250-1
eBook Packages: Economics and FinanceEconomics and Finance (R0)