Abstract
This work presents an analytical study of a suggested mechanism as part of a design process of a Crank-Rocker (CR) engine. The basic geometry of this engine is based on the principal of a four-bar crank rocker mechanism, which requires optimization for effective operation. Kinematic study of this mechanism is achieved using two analysis approaches, analytical and graphical model simulation approach. To achieve the objective, two softwares, namely MATLAB and ADAMS, were used to conduct this analysis and to validate mechanism functionality. Under certain constraints and operational conditions, the simulation results by both applications were compared and found to be almost identical, this gives an indication about mechanism operational behaviour. Moreover, this study provides clear idea about using different approaches and applications for system kinematic study purposes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mohammed SE, Baharom MB, Rashid A, Aziz A (2016) Thermodynamic analysis of a single cylider crank-rocker engine. ARPN J Eng Appl Sci 11:12239–12246
Mohammed SE, Baharom MB, Aziz ARA (2017) Performance and combustion characteristics of a novel crank-rocker engine. J Mech Sci Technol 31:3563–3571
Hassan SEM (2018) Development, performance and emission assessment of a single-cylinder air-cooled gasoline Crank-Rocker engine. Universiti Teknologi Petronas
Mohammed SE, Baharom MB (2019) Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies 1–14
Verma SK, Kumar R, Chittawadigi RG, Saha SK (2016) Kinematic analysis of mechanisms using velocity and acceleration diagrams (VAD) module in mechanalyzer software. In: The proceedings of the Asian conference on multibody dynamics, p. 01_771082
Hroncová D, Delyová I, Frankovský P (2014) Kinematic analysis of mechanisms using MSC Adams. Appl Mech Mater 611:83–89
Norton RL (2012) Design of machinery: an introduction to the synthesis and analysis of mechanisms and machines, McGraw-Hill, New York
Mohammadzadeh A (2007) Analytical synthesis and analysis of mechanisms using MATLAB and SIMULINK. Am Soc Eng Educ 12(242):1
Myszka DH, Celik A (2012) Machines and Mechanism. Prentice Hall
Hroncová D, Binda M, Šarga P, Kičák F (2012) Kinematical analysis of crank slider mechanism using MSC ADAMS/View. Procedia Eng 48:213–22
Hroncová D, Frankovský P, Virgala I, Delyová I (2014) Kinematic analysis of the press mechanism using MSC Adams. Am J Mech Eng 2:312–315
Albaghdadi AM, Baharom MB, bin Sulaiman SA (2021) Parameter design optimization of the crank-rocker engine using the FMINCON function in MATLAB. IOP Conference Series: Materials Science and Engineering 1088(1):012072. https://doi.org/10.1088/1757-899X/1088/1/012072
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Albaghdadi, A.M., Baharom, M.B., Sulaiman, S.A. (2022). A Comparative Study and Validation of Kinematic Analysis of a Crank Rocker Engine Prototype Using MATLAB and ADAMS. In: Ibrahim, R., K. Porkumaran, Kannan, R., Mohd Nor, N., S. Prabakar (eds) International Conference on Artificial Intelligence for Smart Community. Lecture Notes in Electrical Engineering, vol 758. Springer, Singapore. https://doi.org/10.1007/978-981-16-2183-3_11
Download citation
DOI: https://doi.org/10.1007/978-981-16-2183-3_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-2182-6
Online ISBN: 978-981-16-2183-3
eBook Packages: Computer ScienceComputer Science (R0)