Abstract
Biomechanics is a study of the musculoskeletal system and the resulting forces acting on them. Hip joint plays a vital role in the musculoskeletal system, which is why there is a need to analyze it more critically. However, with today’s knowledge of the mechanism of the hip, the study and analysis of stress distribution over the joint are limited. Recreating the environment according to daily activities is very important in the experimental analysis of the joint. This approach is difficult to conduct without and changes to the physiological environment. Numerical methods like finite element methods are used to analyze these systems without any damage or invasive processes. This paper has adopted a novel approach to analyze hip joint using 3D volumetric model generation techniques and finite element method. The hip joint is segmented from the computed tomography (CT) scans of a patient, and the bone model is developed with thresholding and volume generation algorithms. The joint along with the complete hip anatomy has been meshed with octahedral elements. A static load has been considered to apply at the hip joint, and the effect of the load is computed and analyzed. The analyzed data will help for effective design of hip prosthesis and an appropriate selection of material.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Raja SKR, Mageshwaran G (2015) Analysis of hip femur joint for material polycaprolactone 8:488–494
Trask DJ, Keene JS (2016) Analysis of the current indications for microfracture of chondral lesions in the hip joint. Am J Sports Med 44(12):3070–3076. https://doi.org/10.1177/0363546516655141
Henak CR, Abraham CL, Anderson AE, Maas SA, Ellis BJ, Peters CL, Weiss JA (2014) Patient-specific analysis of cartilage and labrum mechanics in human hips with acetabular dysplasia. Osteoarthritis Cartilage 22(2):210–217. https://doi.org/10.1016/j.joca.2013.11.003
Hua X, Li J, Wang L, Jin Z, Wilcox R, Fisher J (2014) Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions. J Biomech 47(13):3303–3309. https://doi.org/10.1016/j.jbiomech.2014.08.015
Piao C, Wu D, Luo M, Ma H (2014) Stress shielding effects of two prosthetic groups after total hip joint simulation replacement. J Orthop Surg Res 9:71. https://doi.org/10.1186/s13018-014-0071-x
Lee S, Wuerz TH, Shewman E, McCormick FM, Salata MJ, Philippon MJ, Nho SJ (2015) Labral reconstruction with iliotibial band autografts and semitendinosus allorafts improves hip joint contact area and contact pressure: an in vitro analysis. Am J Sports Med 43(1):98–104. https://doi.org/10.1177/0363546514553089
Karpiński R, Jaworski Ł, Zubrzycki J (2016) Structural analysis of articular cartilage of the hip joint using finite element method. Adv Sci Technol Res J 10:240–246. https://doi.org/10.12913/22998624/64064
Henak CR, Kapron AL, Anderson AE, Ellis BJ, Maas SA, Weiss JA (2014) Specimen-specific predictions of contact stress under physiological loading in the human hip: validation and sensitivity studies. Biomech Model Mechanobiol 13(2):387–400. https://doi.org/10.1007/s10237-013-0504-1
Kainz H, Carty CP, Modenese L, Boyd RN, Lloyd DG (2015) Estimation of the hip joint centre in human motion analysis: a systematic review. Clin Biomech (Bristol, Avon) 30(4):319–329. https://doi.org/10.1016/j.clinbiomech.2015.02.005
Elkins JM, Callaghan JJ, Brown TD (2014) Stability and trunnion wear potential in large-diameter metal-on-metal total hips: a finite element analysis. Clin Orthop Relat Res 472(2):529–542. https://doi.org/10.1007/s11999-013-3244-8
Christen P, Ito K, Galis F, van Rietbergen B (2015) Determination of hip-joint loading patterns of living and extinct mammals using an inverse Wolff’s law approach. Biomech Model Mechanobiol 14(2):427–432. https://doi.org/10.1007/s10237-014-0602-8
Askari E, Flores P, Dabirrahmani D, Appleyard R (2014) Study of the friction-induced vibration and contact mechanics of artificial hip joints. Tribol Int 70:1–10. https://doi.org/10.1016/j.triboint.2013.09.006
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Dash, A.K., Sai Vishwak, K., Pahuja, V. (2021). Stress and Deformation Analysis of Hip Joint for Design of Hip Prosthesis. In: Pandey, C., Goyat, V., Goel, S. (eds) Advances in Materials and Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-0673-1_10
Download citation
DOI: https://doi.org/10.1007/978-981-16-0673-1_10
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-0672-4
Online ISBN: 978-981-16-0673-1
eBook Packages: EngineeringEngineering (R0)