Abstract
Human body subjected to vibrations experiences multidimensional motion. Seated human body subjected to vertical vibrations exhibits two-dimensional motion in the sagittal plane. An eight degrees of freedom coupled human body model of a seated human with backrest support is developed to depict vertical and fore-aft head motion. The model consists of four rigid masses representing thigh pelvis, lower torso, upper torso, and head. Multi-objective genetic algorithm-based optimization has been used for model parameter identification by minimizing the difference between the experimental and model-derived seat to head transmissibility. The human body model is then integrated with a vehicle model to obtain optimum seat parameters.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lings S, Leboeuf-Yde C (1998) Whole body vibrations and low back pain. Ugeskr Laeger 160(29):4298–4301
Wan Y, Schimmels JM (1995) A simple model that captures the essential dynamics of a seated human exposed to whole body vibration. Adv Bioeng 31:333–334. https://epublications.marquette.edu/mechengin_fac/84/
Zhang X, Qiu Y, Griffin MJ (2015) Developing a simplified finite element model of a car seat with occupant for predicting vibration transmissibility in the vertical direction. Ergonomics 58(7):1220–1231
Zheng G, Qiu Y, Griffin MJ (2011) An analytic model of the in-line and cross-axis apparent mass of the seated human body exposed to vertical vibration with and without a backrest. J Sound Vib 330(26):6509–6525
Marzbanrad J, Afkar A (2013) A biomechanical model as a seated human body for calculation of vertical vibration transmissibility using a genetic algorithm. J Mech Med Biol 13(04):1350053
Wang W, Rakheja S, Boileau P-É (2006) Effect of back support condition on seat to head transmissibilities of seated occupants under vertical vibration. J Low Freq Noise Vib Act Control 25(4):239–259
Rao SS (2009) Engineering optimization: theory and practice. Wiley
Gagorowski A (2010) Simulation study on stiffness of suspension seat in the aspect of the vibration assessment affecting a vehicle driver. Logist Transp 11:55–62
Winter DA (2009) Biomechanics and motor control of human movement. Wiley
Chandler RF, Clauser CE, McConville JT, Reynolds HM, Young JW (1975) Investigation of inertial properties of the human body. Air Force Aero Med Res Lab Wright-Patterson AFB OH. https://apps.dtic.mil/sti/citations/ADA016485
Wang YH, Shih MC (2011) Design of a genetic-algorithm-based self-tuning sliding fuzzy controller for an active suspension system. Proc Inst Mech Eng Part I J Syst Control Eng 225(3):367–383
Wu X (1998) Study of driver-seat interactions and enhancement of vehicular ride vibration environment. Concordia University
Du H, Li W, Zhang N (2012) Integrated seat and suspension control for a quarter car with driver model. IEEE Trans Veh Technol 61(9):3893–3908
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Desai, R., Guha, A., Seshu, P. (2022). Biomechanical Response of Seated Human Body Subjected to Vertical Vibrations Using Coupled Matrix Model. In: Kumar, R., Chauhan, V.S., Talha, M., Pathak, H. (eds) Machines, Mechanism and Robotics. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-0550-5_150
Download citation
DOI: https://doi.org/10.1007/978-981-16-0550-5_150
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-0549-9
Online ISBN: 978-981-16-0550-5
eBook Packages: EngineeringEngineering (R0)