Abstract
Today, power cables use primarily solid extruded insulation compounds of polyethylene in its cross-linked form. Thermoplastic polyethylene was first used, but quickly evolved into longer lasting cross-linked materials. In North America, high molecular weight polyethylene (HMWPE) was also used with poor results. For medium voltage cables, either cross-linked polyethylene (XLPE), ethylene propylene rubber (EPR), or polypropylene (PP) are used as insulation for medium voltage cables. For high and extra high voltage cables, mainly XLPE is used. This chapter will describe the differences that exist in commercially produced polyethylene, specifically high-pressure, low-density polyethylene (LDPE), since this is most commonly used in power cable applications as the base resin. Understanding the differences between the two production methods that are used to produce LDPE, that is the autoclave and the tubular reactor, may clarify the influence of material properties on cable performance, especially cleanliness. This polymer, LDPE, is then further processed to produce XLPE. On the other hand, EPR is produced in a different way and afterwards compounded as cable insulation. At the beginning of this century, PP was introduced as an insulation compound for medium voltage cables and has recently seen equal market share with XLPE in several countries. With PP, the final formulation is produced during the cable production process. Further investigations are currently underway using other polymers such as POE or PB-1 for medium voltage applications. PP is currently used up to 150 kV for AC cables and has passed Type and PQ testing for 600 kV DC cables. This chapter presents the differences between cable compounds and examines the specific features of individual XLPE compounds that are currently available on the market. In addition, details will be presented on the application of different polymers that are currently used for the semi-conductive layers as part of the cable insulation system.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Orton H (2019) The Indispensable Insulated Conductor, IEEE DEIS EIM Editorial, September/October 35(3). ISSN 0883-7554
Black R The History of Electric Wires and Cables, Peter Peregrinus Ltd. (ISBN 0863410014)
Orton H, Hartlein R (2006) Long-life XLPE Insulated Power Cables, Borealis and DOW
Smedberg A, Gustavsson B A cross-linking agent, EP 1944327A1
Smedberg A, et al (1997) Cross-linking reactions in an unsaturated low density polyethylene, Polymer 38(16), August
Malpass DB Introduction to Industrial Polyethylene: Properties, Catalysts, Processes, Chapter 2 Free Radical Polymerization of Ethylene
Fothergill JC et al (2011) The measurement of very low conductivity and dielectric loss in XLPE cables. IEEE Transactions on Dielectrics and Electrical Insulation 18(5), October
Cieloszyk GS (1976) Polyethylene Antioxidant Fundamentals, BP Chemicals Brochure
Campus A, Lafin B, Sterzynski T (1998) Structure—Morphology Modification of Cable Insulation Polymers. IEEE International Conference on Conduction and Breakdown in Solid Dielectrics, June 22–25, Västeras, Sweden
Campus A, et al (1998) Morphology of polyethylene for power cable insulation effects of antioxidant and cross-linking. IEEE International Conference on Conduction and Breakdowns in Solid Dielectrics, June 22–25, Västeras, Sweden
Fukunaga K, et al (1991) Measurement of space charge distribution in cable insulation using the pulsed electro-acoustic method. Third international conference on polymer insulated power cables, p 520
Campus A, Matey G (1983) The influence of cross-linking temperature on the properties of cross-linked low density polyethylene, PRI Conference on Polymers, May 18–19, Manchester, UK
Kjellqvist J, et al (2003) New XLPE Insulation Materials for HV and EHV Cables, Paper B2.2, JiCable
Nakatsuka T, et al (1994) The effect on dielectric loss of polyethylene caused by acetophenone and cumylalcohol, Conference Record of the 1994 International Symposium on Electrical Insulation, Pittsburgh, PA, USA, June 5–8
Basic principles to determine methane content in cross-linked solid extruded insulation of MV and HV cables, CIGRE TB501 WG D1.26, June 2012
Aida F, Tanimoto G, Aihara M, Hoshokawa E (1990) Influence of curing by-products on dielectric loss of XLPE insulation; CEIDP
Hayami T, et al (1981) Leakage Current Characteristic of XLPE. Conference on Electrical Insulation and Dielectric Phenomena, VI-7
Diego JA, et al (2011) Annealing Effect on the Conductivity of XLPE Insulation in Power Cable. IEEE Transactions on Dielectrics and Electrical 18(5):1554–1561, October
Choo W, et al (2009) Space Charge Accumulation under Effects of Temperature Gradient and Applied Voltage Reversal on Solid Dielectric DC Cable, ICPADM, Harbin, China, July 19–23
Recommendations for Additional Tests for Submarine Cables from 6 kV (Um=7.2 kV) up to 60 kV (Um=72.5 kV), CIGRE TB 722, April 2018
Stotzel M, et al (2001) Reliability calculation of MV-distribution networks with regards to ageing in XLPE-insulated cables, IEE Proceedings—Generation, Transmission and Distribution 148(6), November
Andrews T, et al (2006) The Role of Degassing in XLPE Power Cable Manufacture. IEEE Electrical Insulation Magazine 22(6), November/December
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Wald, D., Orton, H. (2021). XLPE-Based Products Available in the Market and Their Applications. In: Thomas, J., Thomas, S., Ahmad, Z. (eds) Crosslinkable Polyethylene Based Blends and Nanocomposites. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-16-0486-7_12
Download citation
DOI: https://doi.org/10.1007/978-981-16-0486-7_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-0485-0
Online ISBN: 978-981-16-0486-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)