Abstract
The scope of this study is to ascertain the weldability of Inconel 625 alloy sheets using an electron beam welding method. Weld joints of the Inconel alloy sheets 2.0 mm thick were welded by an electron beam without an additional material at a flat position. The influence of electron beam welding parameters on weld quality and mechanical properties of test joints was studied. The study of quality and mechanical properties of the joints were determined by metallographic evaluation, tensile and hardness tests.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASM Handbook: Nickel, Cobalt and heir alloys, ISBN: 978–0-87170-685-0, ASM International, USA (2000)
Kumar, G.K., et al.: Thermogravimetric, XPS, AES and EDS studies on the oxidation and nitridation of Inconel 625, Advances in physical metallurgy. In: Proceedings on the International conference on Advances in Physical Metallurgy, ICPM-1994, pp. 375 – 387 (1994)
Eiselstein, H.L., Tillack, D.J.: The invention and definition of alloy 625. Superalloys 718(625), 1–14 (1991)
DuPont, J.N., Lippold, J.C., Kiser, S.D.: Welding Metallurgy and Weldability of Nickel-base Alloys. John Wiley & Sons, Inc., Hoboken (2009)
Caron, J.L., Sowards, J.W.: Weldability of nickel-base alloys. Compr. Mater. Process. 6, 151–179 (2014)
Vivek, P., Akash, S., Hyderb, J., Corlissb, M., Hyderb, D., Hunga, W.: Electron beam welding of inconel 718. Procedia Manuf. 48, 428–435 (2020)
Sun, J., Ren, W., Nie, P., Huang, J., Zhang, K., Li, Z.: Study on the weldability, microstructure and mechanical properties of thick Inconel 617 plate using narrow gap laser welding method. Mater. Des. 175, 107823 (2019)
Janaki Ram, G.D., Venugopal Reddy, A., Prasad Rao, K., Reddy, G.M., Sarin Sundar, J.K.: Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds. J. Mater. Process. Technol. 167, 73–82 (2005)
Huang, C.A., Wang, T.H., Lee, C.H., Han, W.C.: A study of the heat affected zone (HAZ) of an Inconel 718 sheet welded with electron-beam welding (EBW). Mater. Sci. Eng. 398, 275–281 (2005)
Reddy, G.M., Murthy, C.V., Rao, K.S., Rao, K.P.: Improvement of mechanical properties of Inconel 718 electron beam welds—influence of welding techniques and postweld heat treatment. Int. J. Adv. Manuf. Technol. 43, 671–680 (2009)
Agilan, M., Venkateswaran, T., Sivakumar, D., Pant, B.: Effect of heat input on microstructure and mechanical properties of inconel-718 EB welds. Procedia Mater. Sci. 5, 656–662 (2014)
Mei, Y., Liu, Y., Liu, C., Li, C., Yu, L., Guo, Q., Li, H.: Effect of base metal and welding speed on fusion zone microstructure and HAZ hot-cracking of electron-beam welded Inconel 718. Mater. Des. 89, 964–977 (2016)
Sharma, S.K., Agarwal, P., Majumdar, J.D.: Studies on electron beam welded Inconel 718 similar joints. Procedia Manuf. 7, 654–659 (2017)
Peng, G., Zhang, K.F., Zhang, B.G., Jiang, S.S., Zhang, B.W.: Microstructures and high temperature mechanical properties of electron beam welded Inconel 718 superalloy thick plate. Trans. Nonferrous Met. Soc. Chin. 21, 315–322 (2011)
Ram, G.D., Reddy, A.V., Rao, K.P., Reddy, G.M.: Microstructure and mechanical properties of Inconel 718 electron beam welds. Mater. Sci. Technol. 10, 1132–1138 (2005)
Tucho, W.M., Cuvillier, P., Sjolyst-Kverneland, A., Hansen, V.: Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment. Mater. Sci. Eng. 689, 220–232 (2017)
Acknowledgments
This research is supported by VEGA 1/0091/17 which are supported by Slovak Republic Ministry of Education.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kovaříková, I., Šimeková, B., Urminský, J., Kovačócy, P., Hodúlová, E. (2021). Experimental Study of Electron Beam Welding of Inconel Alloy. In: Jármai, K., Voith, K. (eds) Vehicle and Automotive Engineering 3. VAE 2020. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-9529-5_45
Download citation
DOI: https://doi.org/10.1007/978-981-15-9529-5_45
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-9528-8
Online ISBN: 978-981-15-9529-5
eBook Packages: EngineeringEngineering (R0)