Abstract
Additive Manufacturing (AM) technologies have recently gained significance amongst industries as well as everyday consumers. This is largely due to the benefits that they offer in terms of design freedom, lead-time reduction, mass-customization as well as potential sustainability improvements due to efficiency in resource usage. However, conventional manufacturing industries are reluctant to integrate AM within their established process chains due to the unpredictability of the process and the quality of the final parts that are printed. Conventional manufacturing process have the advantage of decades of research in developing process knowledge and optimization, which culminates in accurate process predictability. This gap in process understanding is one that AM will need to cover in a short time. AM does have the benefit of being a digital manufacturing process and with the adoption of advanced Artificial Intelligence (AI) and Machine Learning (ML) techniques in production lines, there may not have been a better industrial age for its implementation. This paper presents a case for actively developing AM processes using ML. Then a method for in-process monitoring of the printing process is presented and discussed. The main benefit from using the proposed system is an increase in the efficiency and final quality of the parts printed, as a result of which there is an increased efficiency in resource usage due to preventing material loss due to failed builds and defected parts.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arumugam, D., Lee, J.K., Saskin, S., Littman, M.L.: %T Deep reinforcement learning from policy-dependent human feedback. (2019). ArXiv abs/1902.04257
Böckin, D., Tillman, A.-M.: Environmental assessment of additive manufacturing in the automotive industry. J. Cleaner Prod. 226, 977–987 (2019). https://doi.org/10.1016/j.jclepro.2019.04.086
Carvalho, N., Chaim, O., Cazarini, E., Gerolamo, M.: Manufacturing in the fourth industrial revolution: A positive prospect in Sustainable Manufacturing. Procedia Manuf. 21, 671–678 (2018). https://doi.org/10.1016/j.promfg.2018.02.170
Charles, A., Elkaseer, A., Thijs, L., Hagenmeyer, V., Scholz, S.: Effect of process parameters on the generated surface roughness of down-facing surfaces in selective laser melting. Appl. Sci. 9(6), 1256 (2019). https://doi.org/10.3390/app9061256
Charles, A., Elkaseer, A., Thijs, L., Scholz, S.G.: Dimensional errors due to overhanging features in laser powder bed fusion parts made of Ti-6Al-4Â V. Appl. Sci. 10(7), 2416 (2020)
Christiano, P.F., Leike, J., Brown, T.B., Martic, M., Legg, S., Amodei, D.: Deep reinforcement learning from human preferences. In: NIPS (2017)
Dilberoglu, U.M., Gharehpapagh, B., Yaman, U., Dolen, M.: The role of additive manufacturing in the era of industry 4.0. Procedia Manuf. 11, 545–554 (2017). https://doi.org/10.1016/j.promfg.2017.07.148
Elkaseer, A., Mueller, T., Charles, A., Scholz, S.: Digital detection and correction of errors in as-built parts: a step towards automated quality control of additive manufacturing. In: Proceedings WCMNM, Portorož, Slovenia 2018, pp. 389–392. Research Publishing Services, Singapore (2018). https://doi.org/10.3850/978-981-11-2728-1_58
Everton, S.K., Hirsch, M., Stravroulakis, P., Leach, R.K., Clare, A.T.: Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Mater. Des. 95, 431–445 (2016). https://doi.org/10.1016/j.matdes.2016.01.099
Fassi, I., Shipley, D.: In: Micro-Manufacturing Technologies and their Applications. Springer Tracts in Mechanical Engineering, 1st edn. Springer, Cham (2017)
Gibson, I., Rosen, D.W., Stucker, B.: Generalized additive manufacturing process chain. In: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, pp. 59–77. Springer US, Boston, MA, (2010). https://doi.org/10.1007/978-1-4419-1120-9_3
Hermann, M., Pentek, T., Otto, B.: Design principles for industrie 4.0 scenarios. In: 2016 49th Hawaii International Conference on System Sciences (HICSS), 5–8 Jan. 2016, pp. 3928-3937. (2016). https://doi.org/10.1109/hicss.2016.488
Jetson, N.: Jetson nano developer kit (2019)
Jetsonhacks: (2019). https://github.com/jetsonhacks Last Access 17/6/2019
MacGlashan, J, Ho, M.K., Loftin, R., Peng, B., Wang, G., Roberts, D.L., Taylor, M.E., Littman, M.L.: Interactive learning from policy-dependent human feedback. In: Paper presented at the Proceedings of the 34th International Conference on Machine Learning, Proceedings of Machine Learning Research, (2017)
Mies, D., Marsden, W., Warde, S.: Overview of additive manufacturing informatics: a digital thread. Integr. Mater. Manuf. Innov. 5, 114–142 (2016). https://doi.org/10.1186/s40192-016-0050-7
Moshiri, M., Charles, A., Elkaseer, A., Scholz, S., Mohanty, S., Tosello, G.: An industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system. Procedia CIRP 00, 000–000 (2020)
Niaki, M.K., Torabi, S.A., Nonino, F.: Why manufacturers adopt additive manufacturing technologies: The role of sustainability. J. Cleaner Prod. 222, 381–392 (2019). https://doi.org/10.1016/j.jclepro.2019.03.019
Ă–zel, T., Altay, A.: Process monitoring of meltpool and spatter for temporal-spatial modeling of laser powder bed fusion process (2018). 10.1016/j.procir.2018.08.049
Paritala, P.K., Manchikatla, S., Yarlagadda, P.K.D.V.: Digital Manufacturing applications past current and future trends. Procedia Eng. 174, 982–991 (2017). https://doi.org/10.1016/j.proeng.2017.01.250
Solheid, J., Elkaseer, A., Wunsch, T., Charles, A., Seifert, H., Pfleging, W.: Effect of process parameters on surface texture generated by laser polishing of additively manufactured Ti-6Al-4V, vol. 11268. SPIE LASE, SPIE (2020)
Spears, T.G., Gold, S.A.: In-process sensing in selective laser melting (SLM) additive manufacturing. Integr. Mater. Manuf. Innov. 5(1), 16–40 (2016). https://doi.org/10.1186/s40192-016-0045-4
Tapia, G., Elwany, A.: A Review on process monitoring and control in metal-based additive manufacturing, 136, (2014). https://doi.org/10.1115/1.4028540
Zezulka, F., Marcon, P., Vesely, I., Sajdl, O.: Industry 4.0—an Introduction in the phenomenon. IFAC-PapersOnLine 49(25), 8–12 (2016). https://doi.org/10.1016/j.ifacol.2016.12.002
Acknowledgements
This work was implemented under the STN programme, part of the Helmholtz association. In addition, the support of the Karlsruhe Nano Micro Facility (KNMF-LMP, http://www.knmf.kit.edu/) a Helmholtz research infrastructure at KIT, is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Charles, A., Salem, M., Moshiri, M., Elkaseer, A., Scholz, S.G. (2021). In-Process Digital Monitoring of Additive Manufacturing: Proposed Machine Learning Approach and Potential Implications on Sustainability. In: Scholz, S.G., Howlett, R.J., Setchi, R. (eds) Sustainable Design and Manufacturing 2020. Smart Innovation, Systems and Technologies, vol 200. Springer, Singapore. https://doi.org/10.1007/978-981-15-8131-1_27
Download citation
DOI: https://doi.org/10.1007/978-981-15-8131-1_27
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8130-4
Online ISBN: 978-981-15-8131-1
eBook Packages: EngineeringEngineering (R0)