Abstract
The current research presents the first step in the design process of a cantilever composite swing arm. The aim of the project is to design and model a swing arm according to the loads applied. Presently used material for swing arm is mild steel. In this project, we are going to design swing arm for the materials, mild steel and composite material carbon fiber. For validating this design, FEA structural analysis is done on the swing arm by using different materials. Modal analysis is also done for different mode shapes to know different frequencies with respect to deformation. For validating this design, FEA structural analysis is done on the leaf spring by using different materials. Modal analysis is also done for different mode shapes to know different frequencies with respect to deformation. Creo 2.0 software is used for designing and ANSYS Workbench 16.1 is used for analysis.
Dasari Ajay—Researcher ID: M-3638-2017.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
S. Swathikrishnan, Design and analysis of Swingarm for performance electric motorcycle. Int. J. Innov. Technol. Explor. Eng. (IJITEE) 8(8) (2019). ISSN 2278-3075
X. Wang, Static and fatigue behavior of basalt fiber-reinforced thermoplastic epoxy composites. J. Compos. Art. Mater. (2019)
R.K. Chacho, Design and experimental validation of a carbon fibre Swingarm test rig (2013)
Z. Song, X. Zha, Research on lightweight design of automobile lower arm based on carbon fiber materials. World J. Eng. Technol. 5, 730–742 (2017). ISSN Online: 2331-4249
B. Smitha, F. Kienhoferb, A carbon fibre swing arm design
S. Mallela, Dr. T. Reddy, K. Naga Manendhar Rao, Design and analysis of motor bike frame. IJPRES Viii(5) (2017)
M. Prem Kumar, G. Mahesh, Analysis of mono leaf spring using composite materials. Int. J. Adv. Eng. 1(6), 591–600 (2015). ISSN 2394-9260; ISSN:2394-9279
J.D. da Cal Ramos, Front and Rear Swing Arm Design of an Electric Racing Motorcycle (Instituto Superior Técnico, Universidade de Lisboa, Portugal, November 2016)
T.D. Jagannatha, G. Harish, Mechanical properties of carbon/glass fiber reinforced epoxy hybrid polymer composite. IJMERR 4(2) (2015). ISSN 2278-0149
K. Meshram, G. Verma, Enhancement of mechanical property of aluminum alloy 2024: an overview. Int. Res. J. Eng. Technol. (IRJET), 05(06) (2018)
Dr. S. Ahamed, P.C. Shilpa, J.D. Roshan, A literature review on aluminium-6061 metal matrix composite. Int. Res. J. Eng. Technol. (IRJET) 06(06) (2019)
K. Satyanarayana, Modelling and analysis of double sided Monoshock Swingarm. J. Compos. Theory (2020). ISSN 0731-6755
B. Smith, F. Kienhöfer, A carbon fibre Swingarm design. R & D J. South Afr. Inst. Mech. Eng. 31, 1–11 (2015)
A. Airoldi, Design of a motorcycle composite swing-arm by means of multi-objective optimisation. Appl. Compos. Mater. 19, 599–618 (2012)
M. Sridharan, Dr. S. Balamurugan, Design and analysis of lower control ARM. Int. J. Innov. Res. Sci. Eng. Technol. 5(4) (2016). An ISO 3297: 2007 Certified Organization
S.H. Abdullah, Design of racing motorcycle Swingarm with shape optimisation. IJSRD Int. J. Sci. Res. Dev. 6(06) (2018). ISSN (online) 2321-0613
Mr. K. Patil, Design and analysis of single sided swing arm for modified bike. Int. Res. J. Eng. Technol. (IRJET), 06(05) (2019)
A. Powar, Analysis and topological optimization of motorcycle swing-arm. Int. J. Curr. Eng. Technol. (2016). E-ISSN 2277-4106, P-ISSN 2347-5161
K. Rajesh, S. Vamshi Krishna, Ch. Sushanth, Design analysis and fabrication of composite mono leaf spring for automobile vehicle. 5(6) (2015). E-ISSN 2277-4106, P-ISSN 2347-5161
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Maheshbabu, P., Ramkumar, R., Ajay, D. (2021). Design and Analysis of Swing Arm Using Carbon Fiber Composite by Using Creo 2.0 and ANSYS. In: Narasimham, G.S.V.L., Babu, A.V., Reddy, S.S., Dhanasekaran, R. (eds) Recent Trends in Mechanical Engineering . Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-7557-0_44
Download citation
DOI: https://doi.org/10.1007/978-981-15-7557-0_44
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-7556-3
Online ISBN: 978-981-15-7557-0
eBook Packages: EngineeringEngineering (R0)