Abstract
In order to verify the heat dissipation effect of the new material foam metal copper, the foam metal copper is welded in the common liquid cooling radiator channel to form a liquid cooling heat dissipation module based on foam copper. Compared with the ordinary liquid-cooled radiator and liquid-cooled radiator with foamed copper, it can be seen that the performance of radiator with foam copper is better than the ordinary radiator, the thermal resistance of channel-type liquid-cooled radiator can be reduced by 17% and the temperature rise can be reduced by 4.5 °C. Under the condition of low-pressure and low-speed liquid supply, the temperature rise can be reduced more obviously and the energy efficiency ratio is higher. In the testing process of liquid-cooled radiator, the actual heat transfer performance increases with the liquid supply flow rate. However, the change of temperature rise tends to flatten when the liquid supply flow rate increases to a certain extent. As a result, it is appropriate to control the liquid supply flow rate in order to ensure heat dissipation effect and take into account the efficiency ratio at the same time.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Meng, L.K.: Research on Composite Heat Dissipation System Based on Foam Metal Copper. Guangdong University of Technology, Guangdong (2018)
Gan, W.Y., He, S.Y., He, D.P.: Preparation and compressive property of foam aluminum with high porosity and small pore diameter. Mater. Mech. Eng. 34(1), 45–48 (2010)
Zhao, L., Tian, F.: Research on foam metal heat exchanger of airborne electronic equipment. Mech. Res. Appl. 1, 48–49 (2016)
Wang, J.P.: Study on Heat Transfer Enhancement and Flow Resistance Characteristics of Porous Foams. Chongqing University, Chongqing (2014)
Wang, C.X., Wang, F.: The current research status on heat transfer performance of metal foams. Foundry Equipment Technol. 5, 42–44 (2011)
Davies, G.J., Zhen, S.: Metallic foam: their production, properties and applications. J. Mater. Sci. 18, 1899–1911 (1983)
Hwang, S.W., Jung, H.H., Hyun, S.H., et al.: Effective preparation of crack-free silica aerogels via ambient drying. J. Sol-Gel Sci. Technol. 41, 139 (2007)
He, D.P., Ma, L.Q., Yu, X.Q.: The heat transfer characteristic of foamed metal with open pore. Chin. J. Mater. Res. 04, 431–434 (1997)
Wang, C.X., Wang, F., Wu, J.G.: Impact factors of heat dissipation of foamed magnesium. Foundry Equipment Technol. 04, 17–19 (2012)
Calmidi, V.V., Mahajan, R.L.: Forced convection in high porosity metal foams. J. Heat Transf. 122, 557–565 (2000)
Simone, M., Claudio, Z., Alberto, C., et al.: Heat transfer during air flow in aluminum foams. Int. J. Heat Mass Transf. 53, 4976–4984 (2010)
Jiang, P.-X., Rui-Na, X., Li, M.: Experimental investigation of convection heat transfer in mini fin structures and sintered porous media. J. Enhanced Heat Transf. 11(4), 391–405 (2004)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, X., Huang, G., Chen, N., Jing, C. (2021). The Liquid Cooling Technique Based on Foam Metal Copper. In: WU, C.H., PATNAIK, S., POPENTIU VLÃDICESCU, F., NAKAMATSU, K. (eds) Recent Developments in Intelligent Computing, Communication and Devices. ICCD 2019. Advances in Intelligent Systems and Computing, vol 1185. Springer, Singapore. https://doi.org/10.1007/978-981-15-5887-0_11
Download citation
DOI: https://doi.org/10.1007/978-981-15-5887-0_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5886-3
Online ISBN: 978-981-15-5887-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)