Abstract
This article presents an overview of various dc-dc converter for isolated and non-isolated topologies. Furthermore, the comparative analysis of various topologies using control techniques based on different parameters such as voltage gain, voltage stress, and efficiency is also discussed. On the basis of this study, authors present a reader guide to classify different types of input sources like photovoltaic (PV), wind, hybrid system etc., with voltage gain topologies for maximum power point tracking (MPPT) algorithms. Different MPPT algorithms becoming important due to their efficiency and ability to adapt and manage nonlinear parameters for efficient energy transformation are generated through clean energy sources.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ansari MF, Kharb RK, Luthra S, Shimmi S, Chatterji S (2013) Analysis of barriers to implement solar power installations in India using interpretive structural modeling technique. Renew Sustain Energ Rev 27:163–174
Lingareddy V, Ravichandra G, Maddukrui P (2013) Effective strategy for MPPT in PV/Wind hybrid electric power system interconnected with electrical utility grid. Int J Adv Res Comput Sci Software Eng 3
Saravana SD (2013) Modeling and simulation of incremental conductance MPPT algorithm for photovoltaic applications. Int J Sci Eng Technol 2(7):681–685. ISSN 2277-1581
Lokanadham M, Bhaskar KV (2012) Incremental conductance based maximum power point tracking (MPPT) for photovoltaic system. Int J Eng Res Appl (IJERA) 2:1420–1424
Chukwuka C, Folly K (2013) Technical and economic modeling of the 2.5 kW grid-tie residential photovoltaic system. Int J Renew Energ Res 3:412–419
Gupta MK (2013) MPPT simulation with DC submersible solar pump using output sensing direct control method and cuk converter. Int J Renew Energ Res (IJRER) 3:186–191
Koutroulis E, Kalaitzakis K, Voulgaris NC (2001) Development of a microcontroller-based, photovoltaic maximum power point tracking control system. IEEE Trans Power Electron 16:46–54
Kjaer SB, Pedersen JK, Blaabjerg F (2005) A review of single-phase grid-connected inverters for photovoltaic modules. IEEE Trans Ind Appl 41:1292–1306
Hsiao Y-T, Chen C-H (2002) Maximum power tracking for photovoltaic power system. In: Conference record of the 2002 IEEE industry applications conference. 37th IAS Annual Meeting (Cat. No. 02CH37344), pp 1035–1040
Muhamad MI, Radzi MAM, Wahab NIA, Hizam H, Mahmood MF (2014) Optimal design of hybrid renewable energy system based on solar and biomass for halal products research institute, UPM. In: 2014 IEEE innovative smart grid technologies—Asia (ISGT ASIA), pp 692–696
Qin L, Lu X (2012) Matlab/simulink-based research on maximum power point tracking of photovoltaic generation. Phys Procedia 24:10–18
Lim YH, Hamill D (2000) Simple maximum power point tracker for photovoltaic arrays. Electron Lett 36:997–999
Forouzesh M, Shen Y, Yari K, Siwakoti YP, Blaabjerg F (2018) High-efficiency high step-up DC–DC converter with dual coupled inductors for grid-connected photovoltaic systems. IEEE Trans Power Electron 33:5967–5982
Mousa M, Ahmed ME, Orabi M (2011) New converter circuitry for high v applications using switched inductor multilevel converter. In: 2011 IEEE 33rd international telecommunications energy conference (INTELEC), pp 1–8
Rosas-Caro JC, Ramirez JM, Peng FZ, Valderrabano A (2010) A DC–DC multilevel boost converter. IET Power Electron 3:129–137
An L, Cheng T, Lu D-C (2018) Single-stage boost-integrated full-bridge converter with simultaneous MPPT, wide DC motor speed range and current ripple reduction. IEEE Trans Ind Electron
Kasper M, Bortis D, Kolar JW (2014) Classification and comparative evaluation of PV panel-integrated DC–DC converter concepts. IEEE Trans Power Electron 29:2511–2526
Prieto MBF, Litran SP, Aranda ED, Gomez JME (2016) New single-input, multiple-output converter topologies: combining single-switch non-isolated DC-DC converters for single-input, multiple-output applications. IEEE Ind Electron Mag 10:6–20
Mirzaei R, Ramanarayanan V (2005) Polyphase boost converter for automotive and UPF applications. In: 2005 European conference on power electronics and applications, p. 9
Ponniran B, Matsuura K, Orikawa K, Itoh J-I (2014) Size reduction of DC-DC converter using flying capacitor topology with small capacitance. IEEJ J Ind Appl 3:446–454
Maksimovic D, Cuk S (1991) Switching converters with wide DC conversion range. IEEE Trans Power Electron 6:151–157
Zhou D, Pietkiewicz A, Cuk S (1999) A three-switch high-voltage converter. IEEE Trans Power Electron 14:177–183
Li W, Lv X, Deng Y, Liu J, He X (2009) A review of non-isolated high step-up DC/DC converters in renewable energy applications. In: 2009 Twenty-fourth annual IEEE applied power electronics conference and exposition, pp 364–369
Remache SEI, Barra K (2018) Performance comparison among boost and multi level boost converters for photovoltaic grid connected system using finite set model predictive control. In: 2018 9th international renewable energy congress (IREC), pp 1–6
Middlebrook R (1988) Transformerless DC-DC converters with large conversion ratios. IEEE Trans Power Electron 3:484–488
Wen H, Su B (2016) Hybrid-mode interleaved boost converter design for fuel cell electric vehicles. Energ Convers Manag 122:477–487
Balogh L, Redl R (1993) Power-factor correction with interleaved boost converters in continuous-inductor-current mode. In: Proceedings eighth annual applied power electronics conference and exposition, pp 168–174
Redl R, Balogh L (1992) RMS, DC, peak, and harmonic currents in high-frequency power-factor correctors with capacitive energy storage. In: Proceedings of APEC’92 seventh annual applied power electronics conference and exposition, pp 533–540
Giral R, Martinez-Salamero L, Singer S (1999) Interleaved converters operation based on CMC. IEEE Trans Power Electron 14:643–652
Duarte CM, Barbi I (1996) A new family of ZVS-PWM active-clamping DC-DC boost converters: analysis, design, and experimentation. In: Proceedings of Intelec’96—international telecommunications energy conference, pp 305–312
Canesin CA, Barbi I (1995) Comparison of experimental losses among six different topologies for a 1.6 kW boost converter, using IGBTs. In: Proceedings of PESC’95—power electronics specialist conference, pp 1265–1271
Hwu K, Yau Y (2010) A KY boost converter. IEEE Trans Power Electron 25:2699–2703
Hwu K, Peng T (2012) A novel buck–boost converter combining KY and buck converters. IEEE Trans Power Electron 27:2236–2241
Noman M, Addoweesh KE, Mashaly HM (2013) Simulation and dSPACE hardware implementation of the MPPT techniques using buck boost converter. In: 2013 Africon, pp 1–9
Karami N, Moubayed N, Outbib R (2017) General review and classification of different MPPT Techniques. Renew Sustain Energy Rev 68:1–18
Das M, Agarwal V (2016) Design and analysis of a high-efficiency DC–DC converter with soft switching capability for renewable energy applications requiring high voltage gain. IEEE Trans Ind Electron 63:2936–2944
Xuewei P, Rathore AK (2014) Novel bidirectional snubberless naturally commutated soft-switching current-fed full-bridge isolated DC/DC converter for fuel cell vehicles. IEEE Trans Ind Electron 61:2307–2315
Zhu X, Zhang B, Li Z, Li H, Ran L (2017) Extended switched-boost dc-dc converters adopting switched-capacitor/switched-inductor cells for high step-up conversion. IEEE J Emerg Sel Topics Power Electron 5:1020–1030
Shahir FM, Babaei E, Farsadi M (2017) Analysis and design of voltage-lift technique-based non-isolated boost dc-dc converter. IET Power Electron 11:1083–1091
Knecht O, Bortis D, Kolar JW (2018) ZVS modulation scheme for reduced complexity clamp-switch TCM dc-dc boost converter. IEEE Trans Power Electron 33:4204–4214
Shalini NP, Dhanalakshmi R (2017) Soft switching based single switch integrated converter with high voltage gain for renewable energy conversion. In: 2017 International conference on smart technologies for smart nation (SmartTechCon), pp 40–45
Tseng K-C, Chang S-Y, Cheng C-A (2019) Novel isolated bidirectional interleaved converter for renewable energy applications. IEEE Trans Ind Electron
Liao Z, Lei Y, Pilawa-Podgurski RC (2019) Analysis and design of a high power density flying-capacitor multilevel boost converter for high step-up conversion. IEEE Trans Power Electron 34:4087–4099
Addula SR, Prabhakar M (2017) A soft switched interleaved high gain DC-DC converter. J Eng Sci Technol 12:2346–2359
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Gupta, P., Shimi, S.L. (2021). A Comprehensive Study of Different Converter Topologies for Photovoltaic System Under Variable Environmental Conditions. In: Pandey, V.C., Pandey, P.M., Garg, S.K. (eds) Advances in Electromechanical Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-5463-6_40
Download citation
DOI: https://doi.org/10.1007/978-981-15-5463-6_40
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5462-9
Online ISBN: 978-981-15-5463-6
eBook Packages: EngineeringEngineering (R0)