Abstract
In this paper, the stringer’s buckling analysis is analyzed and reported. To block the shock, twist, and other stresses, the chassis should be in very high strength. More than that of strength, the chassis should tolerate the buckling condition of the frame. Here, the work is done toward stringer analysis in chassis with the properties of buckling behavior, strength by use of FEA software (Ansys Workbench). The result shows that hat stringer is stronger than C-stringer during the stringer on buckling conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ren Y, Yongchang Y, Zhao B, Fan C, Li H (2017) Finite element analysis and optimal design for the frame of SX360 dump trucks. Procedia Eng 174:638–647
Lanzutti A, Andreatta F, Raffaelli A, Magnana M, Zuliani L, Fantoni M, Fedrizzi L (2017) Failure analysis of a continuous press component in MDF production plant. Eng Fail Anal 82:493–500
Mo Y, Ge D, He B (2016) Experiment and optimization of the hat-stringer-stiffened composite panels under axial compression. Compos: Eng Part. B 84:285–293
Raghuvanshi AC, Srivastav T, Mishra RK (2015) Design and development of foldable kart chassis. Mater Today 2(4–5):1707–1713
Han T, Huang C, Tan ACC (2014) Experimental and finite element analysis to identify the source of vibration of a coach. Eng Fail Anal 44:100–109
Homma T, Kunito N, Kamado S (2009) Fabrication of extraordinary high-strength magnesium alloy by hot extrusion. Scripta Mater 61(6):644–647
Karaoglu C, Kuralay NS (2002) Stress analysis of a truck chassis with riveted joints. Finite Elem Anal Des 38(12):1115–1130
Conle FA, Mousseau CW (1991) Using vehicle dynamics simulations and finite-element results to generate fatigue life contours for chassis components. Int J Fatigue 13(3):195–205
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Stalin, B., Dhinakaran, V., Ravichandran, M., Sathiya Moorthi, K., Vairamuthu, J. (2021). Buckling Analysis of C-Stringer and Hat Stringer on the Load Carrying Vehicle. In: Arockiarajan, A., Duraiselvam, M., Raju, R. (eds) Advances in Industrial Automation and Smart Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4739-3_15
Download citation
DOI: https://doi.org/10.1007/978-981-15-4739-3_15
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4738-6
Online ISBN: 978-981-15-4739-3
eBook Packages: EngineeringEngineering (R0)