Abstract
This paper presents a model-free optimization algorithm for a PID controller based on Fictitious Reference Iterative Tuning and Simulated Kalman Filter. The modeling of a buck converted-powered DC motor system is first provided to form the basis of data collection and fictitious reference signal derivation. The supplied model is however not a necessity in the scope of this work but is provided for the purpose of performance comparison. A cost function is formulated based on the minimization of error between the output response of the desired model with the output response of the closed-loop system. Simulation analyses using Matlab Software have been conducted for results validation and verification. Furthermore, a performance comparison between the proposed method and a model-based controller design has been carried out. From the numerical example, it shows that the system with the tuned PID controller exhibited a better angular velocity trajectory tracking compared to the system with the state feedback controller with integral gain.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Parasiliti F, Villani M, Castello M (2014) PM brushless DC motor with exterior rotor for high-efficiency household appliances. In: 2014 international conference on electrical machines, ICEM 2014, pp 623–628
Hwang CC, Liu PL, Li CT, Chen C (2012) Design and analysis of a brushless DC motor for applications in robotics. IET Electr Power Appl 6(7):385–389
Rajesh D, Ravikumar D, Bharadwaj SK, Vastav BKS (2016) Design and control of digital DC drives in steel rolling mills. Int Conf Inven Comput Technol, ICICT 2016:1–5
Hall RD, Konstanty WJ (2010) Commutation of DC motors. IEEE Ind Appl Mag (16):56–62
Silva-Ortigoza R, Hernández-Guzmán VM, Antonio-Cruz M, Muñoz-Carrillo D (2015) DC/DC buck power converter as a smooth starter for a DC motor based on a hierarchical control. IEEE Trans Power Electron 30(2):1076–1084
Beevi A, Noufal M (2016) Hierarchical control For a buck converter driven DC motor. Int J Adv Res Electr, Electron Instrum Eng 5(9):7218–7224
Hernandez-Marquez E, Silva-Ortigoza R, Dong SH, Garcia-Rodriguez VH, Saldana-Gonzalez G, Marcelino-Aranda M (2016) A new DC/DC buck-boost converter-DC motor system: modeling and simulation. Int Conf MechatronS, Electron, Automot Eng, ICMEAE 2016:101–106
Ahmad MA, Raja Ismail RMT, Ramli MS (2010) Control strategy of buck converter driven DC motor: a comparative assessment. Aust J Basic Appl Sci (10):4893–4903
Linares-Flores J, Sira-Ramírez H (2017) Sliding mode-delta modulation GPI control of a DC motor through a buck converter. IFAC Proc Vol 37(21):405–410
Kamarposhti MA, Tayebbifar T, Shaker M, Nouri P (2013) The control of buck-boost DC-DC converters for DC motor drives on variable DC voltage by using neural network. Life Sci J 10(5):236–240
Ahmad MA, Raja Ismail, RMT (2017) A data-driven sigmoid-based PI controller for buck-converter powered DC motor. In: IEEE symposium on computer applications and industrial electronics, pp 81–86
Li G, Liu L (2012) Robust adaptive coordinated attitude control problem with unknown communication delays and uncertainties. Procedia Eng 29:1447–1455
Battistelli G, Selvi D, Mari D, Tesi P (2014) Unfalsified approach to data-driven control design. In: IEEE conference on decision and control, pp 6003–6008
Saleem O, Rizwan M (2019) Performance optimization of LQR-based PID controller for DC-DC buck converter via iterative-learning-tuning of state-weighting matrix. Int J Numer Model: Electron Netw, Devices Fields, 1–17
Rallo G, Formentin S, Rojas CR, Savaresi SM (2018) Experiment design for virtual reference feedback tuning. In: IEEE conference on decision and control, pp 2271–2276
Kaneko O, Soma S, Fujii T (2005) A fictitious reference iterative tuning (FRIT) in the two degrees of freedom control scheme and its application to closed-loop system identification. IFAC Proc Vol 626–631
Nguyen HT, Kaneko O, Yamamoto S (2011) Data-driven IMC for non-minimum phase systems—Laguerre expansion approach. In: 50th IEEE conference on decision and control and european control conference, pp 476–481
Ramli MS, Ahmad H (2018) Data-driven impedance matching in multilateral teleoperation systems. Indones J Electr Eng Comput Sci 10(2):713–724
Hou ZS, Wang Z (2013) From model-based control to data-driven control: survey, classification and perspective. Inf Sci 235:3–35
Ibrahim Z et al (2015) A Kalman filter approach for solving unimodal optimization problems. ICIC Express Lett 9(12):3415–3422
Ibrahim Z, Abdul Aziz NH, Nor NA, Razali S, Mohamad MS (2016) Simulated Kalman filter: a novel estimation-based metaheuristic optimization algorithm. Adv Sci Lett 22(10):2941–2946
Kalman RE (1960) A new approach to linear filtering and prediction problems. J Basic Eng 82:35–45
Ramli MS, Rahmat MF (2008) Servomotor control using direct digital control and state space technique. J Teknologi 49(D):45–60
Acknowledgements
Special thanks and appreciation belong to Universiti Malaysia Pahang for providing financial assistance towards completing this research work. This paper has been supported under the short-term grant of RDU1703139.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Ramli, M.S., Sian, S.M., Salim, M.N., Ahmad, H. (2020). A Fictitious Reference Iterative Tuning Method for Buck Converter-Powered DC Motor Control System. In: Kasruddin Nasir, A.N., et al. InECCE2019. Lecture Notes in Electrical Engineering, vol 632. Springer, Singapore. https://doi.org/10.1007/978-981-15-2317-5_5
Download citation
DOI: https://doi.org/10.1007/978-981-15-2317-5_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2316-8
Online ISBN: 978-981-15-2317-5
eBook Packages: EngineeringEngineering (R0)