Abstract
This paper presents a comparative analysis between the two controllers, PI and fuzzy logic controllers that used for power factor correction using DC-to-DC single-ended primary-inductor converter (SEPIC) converter. MATLAB/Simulink models of SEPIC converter are developed to improve the power factor and output voltage regulation. Average current control technique is used for input power factor correction to get a regulated voltage at the output PI or fuzzy logic controller (FLC) is adopted. The system is tested at both steady-state and transient conditions, and its performance is then estimated and compared in terms of various parameters like total harmonic distortion (THD), input power factor, output voltage ripple for PI and FLC.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mishra AK, Pathak MK, Das S (2011) Isolated converter topologies for power factor correction—a comparison. In: IEEE international conference on energy, automation and signal, 28 Dec 2011, pp 1–6
Kuiyuan W (2006) The comparison and choice of several power factor correction methods. In: IEEE vehicle power and propulsion conference, Sep 2006, pp 1–5, IEEE
519–2014: IEEE recommended practice and requirements for harmonic control in electric power systems, 11 June 2014, pp 1–29
Pressman I (1991) Switching power supply design. McGraw-Hill, New York
Patra AK, Rout PK (2017) Adaptive continuous-time model predictive controller for implantable insulin delivery system in type I diabetic patient. Optimal Control Appl Methods 38:184–204
Patra AK, Rout PK (2014) Optimal H-infinity insulin injection control for blood glucose regulation in IDDM patient using physiological model. Int J Autom Control 8:309–322
Singh B, Singh BN, Chandra A, Al-Haddad K, Pandey A, Kothari DP (2003) A review of single-phase improved power quality AC-DC converters. IEEE Trans Ind Electron 50(5):962–981
Batarseh I (2003) Power electronics circuits, 3rd edn. Wiley, London
Richard R (1994) The fundamentals of power factor correction. Int J Electr Eng Educ 31:213–229
Dah D, Ki SK (2013) Light-load efficiency improvement in buck-derived single-stage single-switch PFC converters. IEEE Trans Power Electron 28(5):2105–2110
Patra AK, Mishra AK, Rout PK (2018) Backstepping model predictive controller for blood glucose regulation in type-I diabetes patient. IETE J Res. https://doi.org/10.1080/03772063.2018.1493404
Patra AK, Rout PK (2017) Adaptive sliding mode Gaussian controller for artificial pancreas in TIDM patient. J Process Control 58:23–27
Liu X, Xu J, Chen Z et al (2015) Single-inductor dual-output buck–boost power factor correction converter. IEEE Trans Ind Electron 62(2):943–952
Kanaan HY, Al-Haddad K, Fnaiech F (2004) Switching-function-based modeling and control of a SEPIC power factor correction circuit operating in continuous and discontinuous current modes. In: IEEE international conference on industrial technology, vol 1, no 8, pp 431–437, Dec 2004
Umamaheswari MG, Uma G (2013) Analysis and design of reduced order linear quadratic regulator control for three phase power factor correction using Cuk rectifiers. Electr Power Syst Res 1(96):1–8
Mahdavi M, Farzanehfard H (2011) Bridgeless SEPIC PFC rectifier with reduced components and conduction losses. IEEE Trans Ind Electron 58(9):4153–4160
Umamaheswari MG, Uma G, Isabella LA (2014) Analysis and design of digital predictive controller for PFC Cuk converter. J Comput Electron 13(1):142–154
Poorali B, Adib E (2016) Analysis of the integrated SEPIC-flyback converter as a single-stage single-switch power-factor-correction LED driver. IEEE Trans Ind Electron 63(6):3562–3569
Melo PF, Gules R, Ribeiro EF et al (2010) A modified SEPIC converter for high-power-factor rectifier and universal input voltage applications. IEEE Trans Power Electron 25(2):310–321
Sudhakarababu C, Veerachary M (2004) Zeta converter for power factor correction and voltage regulation. In: 2004 IEEE region 10 conference TENCON 2004, 24 Nov 2004, vol 500, pp 61–64, IEEE
Patra AK, Rout PK (2018) Backstepping sliding mode Gaussian insulin injection control for blood glucose regulation in TIDM patient. J Dyn Syst Meas Control 140(9):091006-091006-15
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Mishra, A.K. et al. (2020). Average Current-Controlled SEPIC Converter with High Power Factor Correction. In: Sharma, R., Mishra, M., Nayak, J., Naik, B., Pelusi, D. (eds) Innovation in Electrical Power Engineering, Communication, and Computing Technology. Lecture Notes in Electrical Engineering, vol 630. Springer, Singapore. https://doi.org/10.1007/978-981-15-2305-2_36
Download citation
DOI: https://doi.org/10.1007/978-981-15-2305-2_36
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2304-5
Online ISBN: 978-981-15-2305-2
eBook Packages: EngineeringEngineering (R0)