Abstract
A nonlinear strength criterion for rock-like materials is developed in this chapter. Taking α as an angle of micro-failure orientation in rock-like materials, a formulation between α and load is derived from a mixed-mode fracture criterion based on linear elastic fracture mechanics. According to micro-failure experimental phenomena of rock-like materials, a failure characteristic parameter under triaxial compression condition is chosen, which is relevant to confining pressure and is an invariant. A theoretical nonlinear strength criterion is also derived, which is exactly in the same mathematical form as the original Hoek–Brown empirical strength criterion. In addition, it is also found that the coefficient m in the Hoek–Brown criterion has physical meaning which is related to the ratio between the uniaxial compressive strength and the uniaxial tensile strength.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-Ajmi AM, Zimmerman RW (2005) Relation between the Mogi and the Coulomb failure criteria. Int J Rock Mech Min Sci 42(3):431–439
Anderson TL (2005) Fracture mechanics: fundamentals and applications. Taylor & Francis, Boca Raton, FL
Andreev GE (1995) Brittle failure of rock materials: test results and constitutive models. Balkema, Rotterdam
Brace WF, Bombolakis EG (1963) A note on brittle crack growth in compression. J Geophys Res 68:3709–3713
Brace WF, Paulding BW, Scholz C (1966) Dilatancy in the fracture of crystalline rocks. J Geophys Res 71:3939–3953
Brady BT (1969) A statistical theory of brittle fracture for rock materials. Part I: brittle failure under homogeneous axisymmetric states of stress. Int J Rock Mech Min Sci 6:21–42
Cotterell B, Rice JR (1963) Slightly curved or kinked cracks. Int J Fract 1980, 16(2):155–169. Erdogan F, Sih GC On the crack extension in plates under plane loading and transverse shear. J Basic Eng 85:519–527
Diederichs MS (2003) Rock fracture and collapse under low confinement conditions. Rock Mech Rock Eng 36(5):339–381
Fairhurst C, Cook NGW (1966) The phenomenon of rock splitting parallel to the direction of maximum compression in the neighbourhood of a surface. In: Proceedings of the first congress of the international society of rock mechanics, Lisbon, pp 687–692
Gong FQ, Luo S, Lin G, Si XF (2018) Dynamic empirical Mohr–Coulomb criterion of marble under low loading rate. In: Proceeding of International conference on geo-mechanics, geo-energy and geo-resources, IC3G, Chengdu, China, 22–24 Sept 2018, pp. 87–95
Gong FQ, Si XF, Li XB, Wang SY (2019) Experimental investigation of strain rockburst in circular caverns under deep three-dimensional high-stress conditions. Rock Mech Rock Eng 52(5):1459–1474
Gregg WJ (1985) Microscopic deformation mechanisms associated with mica film formation in cleaved Psammitic rocks. J Struct Geol 7:45–56
Griffith AA (1921) The phenomena of rupture and flow in solids. Philos Trans Roy Soc London Ser A. 221:163–198
Hoek E (1998) Reliability of Hoek–Brown estimates of rock mass properties and their impact on design. Int J Rock Mech Min Sci 35(1):63–68
Hoek E, Brown ET (1980a) Underground excavations in rock. Institute of Mining and Metallurgy, London
Hoek E, Brown ET (1980b) Empirical strength criterion for rock mass. J Geotech Eng Div ASCE. 106(9):1013–1035
Hoek E, Brown ET (1983) Strength of jointed rock masses. Geotechnique 33:187–223
Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci 34:1165–1186
Hoek E, Wood D, Shah S (1992) A modified Hoek–Brown criterion for jointed rock masses. In: Hudson JA (ed) Proceedings of the rock characterization, ISRM symposium Eurock’92. British Geotechnical Society, London, pp 209–214
Jaeger JC, Cook NGW, Zimmerman RW (2007) Fundamentals of rock mechanics, 4th edn. Blackwell, Oxford
Kachanov ML (1982a) A microcrack model of rock inelasticity, Part I: frictional sliding on microcracks. Mech Mater 1:19–27
Kachanov ML (1982b) A microcrack model of rock inelasticity, Part II: propagation of microcracks. Mech Mater 1:29–41
Kemeny JM, Cook NGW (1991) Micromechanics of deformation in rocks. In: Shah SP (ed) Toughening mechanisms in quasi-brittle materials. Kluwer Academic Publishers, Dordrecht, pp 155–188
Nuismer RJ (1975) An energy release rate criterion for mixed mode fracture. Int J Fract 11(2):245–250
Paterson MS, Wong TF (2005) Experimental rock deformation—the brittle field. Springer, Berlin
Si XF, Gong FQ, Li XB, Wang SY, Luo S (2019) Dynamic Mohr–Coulomb and Hoek–Brown strength criteria of sandstone at high strain rate. Int J Rock Mech Min Sci 115:48–59
Sih GC (1974) Strain-energy-density factor applied to mixed mode crack problems. Int J Fract 10(3):305–321
Sih GC, Macdonald B (1974) Fracture mechanics applied to engineering problems-strain-energy density fracture criterion. Eng Frac Mech 6(2):361–386
Tada H (1973) Stress analysis of cracks handbook. Del Research Corporation, Hellertown, PA
Wang XS, Wu BS, Wang QY (2005) Online SEM investigation of microcrack characteristics of concretes at various temperatures. Cement Concr Res 35:1385–1390
Wiebols GA, Cook NGW (1968) An energy criterion for the strength of rock in polyaxial compression. Int J Rock Mech Min Sci 5:529–549
Williams E (1957) Some observations of Leonardo, Galileo, Mariotte and others relative to size effect. Ann Sci 13:23–29
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Zuo, J., Shen, J. (2020). A 2-D Theoretical Derivation of the Hoek–Brown Criterion. In: The Hoek-Brown Failure criterion—From theory to application. Springer, Singapore. https://doi.org/10.1007/978-981-15-1769-3_2
Download citation
DOI: https://doi.org/10.1007/978-981-15-1769-3_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1768-6
Online ISBN: 978-981-15-1769-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)