Abstract
The main objective of present study is to see the feasibility of aluminum alloy deposition over mild steel using aluminization technique to improve the corrosion resistance by developing an economically feasible technique. Aluminum alloy coating has been done by dipping the mild steel in hot liquid metal of aluminum alloy at above 800 °C for various time intervals; hot dipped mild steel rods were allowed to air cool. Coatings were characterized to observe the grains diffusion between coating and base metal, it is found that coating metal is diffused into mild steel surface and formed a corrugated grain profile that is facilitating interlocking between both surfaces and this is desired to improve bond strength. Hardness test and toughness test were conducted to observe the strength of the coating and found that coating strength is improved. This process assures a tight bond between the base metal and coating metal.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Jagielski J et al (2000) Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel. Appl Surf Sci 156(1–4):47–64
Richards RW et al (1994) Metallurgy of continuous hot dip aluminizing. Int Mater Rev 39(5):191–212
Ryabov VR (1985) Aluminizing of Steel. Oxonian Press, New Delhi, pp 48–51
Dovey DM, Waluski A (1963) Continuous dip aluminizing of steel. Metallurgia 67:211–217
Young WB, McComb JA (1990) New piston ring face coatings using design of experiments. SAE Trans, Section 3, Part 2, 99:1228–1235
Hunter CE, Gardner TP, Zakrajsek CE (1990) Simultaneous optimisation of diesel engine parameters for low emissions using Taguchi methods. SAE Trans, Section 3, Part 2, 99:2068–2078
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, B.V., William, K.J. (2020). Characterization of Aluminium Alloy 6063 Coated Over Mild Steel by Aluminization Process. In: Narasimham, G., Babu, A., Reddy, S., Dhanasekaran, R. (eds) Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1124-0_40
Download citation
DOI: https://doi.org/10.1007/978-981-15-1124-0_40
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1123-3
Online ISBN: 978-981-15-1124-0
eBook Packages: EngineeringEngineering (R0)