Abstract
In the era of globalization, manufacturing industries are facing intense pressure to prevent unexpected breakdowns, reduce maintenance cost and increase plant availability. Due to increasing trend of Internet of things (IoT), numerous sensors deployed around the world are developing at a rapid pace. In this paper, an IoT-based wireless control and monitoring system has been presented for determining the health of induction motor (IM). A module of sensors has been employed to monitor the different parameters, viz. current, voltage, temperature, and speed which were processed using microcontroller for analysis and display purposes. Further, the Ethernet module has been used for sending the information from the microcontroller to cloud (Cayenne) database for wireless remote monitoring and controlling of induction motor. The system has been implemented to monitor and control various parameters in real time, and also improving the detectability of different faults due to over limiting of the current, voltage, temperature, and speed values. The proposed system has significant potential in industrial environment with complex systems to economically monitor the condition of machine safely in real time.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Goyal D, Pabla BS (2016) The vibration monitoring methods and signal processing techniques for structural health monitoring: a review. Arch Comput Methods Eng 23(4):585–594
Choudhary A, Goyal D, Shimi SL, Akula A (2018) Condition monitoring and fault diagnosis of induction motors: a review. Arch Comput Methods Eng  26(4):1221–1238
Goyal D, Pabla BS (2015) Condition based maintenance of machine tools—a review. CIRP J Manufact Sci Technol 10:24–35
Lazar C, Burlacu A, Archip A (2014) Vision-guided robot manipulation predictive control for automating manufacturing. In: Service orientation in Holonic and multi-agent manufacturing and robotics. Springer, Cham, pp. 313–328
Xia M, Li T, Zhang Y, de Silva CW (2016) Closed-loop design evolution of engineering system using condition monitoring through internet of things and cloud computing. Comput Netw 101:5–18
Saez M, Maturana FP, Barton K, Tilbury DM (2018) Real-time manufacturing machine and system performance monitoring using internet of things. IEEE Trans Autom Sci Eng 99:1–14
Goyal D, Pabla BS, Dhami SS, Lachhwani K (2017) Optimization of condition-based maintenance using soft computing. Neural Comput Appl 28(1):829–844
Halem N, Zouzou SE, Srairi K, Guedidi S, Abbood FA (2013) Static eccentricity fault diagnosis using the signatures analysis of stator current and air gap magnetic flux by finite element method in saturated induction motors. Int J Syst Assur Eng Manag 4(2):118–128
Goyal D, Pabla BS (2016) Development of non-contact structural health monitoring system for machine tools. J Appl Res Technol 14(4):245–258
Goyal D, Vanraj, Pabla BS, Dhami SS (2019) Non-contact sensor placement strategy for condition monitoring of rotating machine-elements. Eng Sci Technol Int J 22(2):489–501
Perera C, Zaslavsky A, Christen P, Georgakopoulos D (2014) Context aware computing for the internet of things: a survey. IEEE Commun Surv Tutor 16(1):414–454
Jung JH, Lee JJ, Kwon BH (2006) Online diagnosis of induction motors using MCSA. IEEE Trans Industr Electron 53(6):1842–1852
Dohr A, Modre-Opsrian R, Drobics M, Hayn D, Schreier G (2010) The internet of things for ambient assisted living. In: 2010 seventh international conference on information technology: new generations, IEEE, pp 804–809
Kumar S, Singh P, Sehgal S, Kumar H, Aggarwal N, Singh S, Goyal D (2019) Application of industrial internet of things for online monitoring of bearings. Lect Notes Mech Eng: In Press.Â
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Choudhary, A., Jamwal, S., Goyal, D., Dang, R.K., Sehgal, S. (2020). Condition Monitoring of Induction Motor Using Internet of Things (IoT). In: Kumar, H., Jain, P. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1071-7_30
Download citation
DOI: https://doi.org/10.1007/978-981-15-1071-7_30
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1070-0
Online ISBN: 978-981-15-1071-7
eBook Packages: EngineeringEngineering (R0)