Abstract
The washing and distillation tower (WDT) is a general equipment which can combine wet washing with distillation. In order to solve the problems of incomplete removal of solid particles, low efficiency of gas-liquid separation, small flexibility and easy blockage of internals of conventional WDT, a combined washing and distillation technology (CWDT) was developed by coupling inertial dust removal with flow-guided sieve tray, dual-flow tray and micro-bubble mass transfer technology (MBT). Experimental research, by laying a MBT mesh up the tray, was carried out based on the new MBT to examine the change of the mean bubble diameter, pressure drop and total gas hold-up under different operating conditions. The experimental results show that the mean bubble diameter can be reduced from 20 mm–57 mm to 1 mm–3.5 mm, greatly increases the washing effect and gas-liquid mass transfer efficiency. The technology has been successfully applied to the synthesis of organosilicon monomer and the heat recovery process of crude gas, and achieved good results, which proves the feasibility and advancement of the technology.
Copyright 2019, IPPTC Organizing Committee.
This paper was prepared for presentation at the 2019 International Petroleum and Petrochemical Technology Conference in Beijing, China, 27–29, March, 2019.
This paper was selected for presentation by the IPPTC Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the IPPTC Technical Committee and are subject to correction by the author(s). The material does not necessarily reflect any position of the IPPTC Technical Committee, its members. Papers presented at the Conference are subject to publication review by Professional Team of Petroleum Engineering of the IPPTC Technical Committee. Electronic reproduction, distribution, or storage of any part of this paper for commercial purposes without the written consent of Shaanxi Petroleum Society is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of IPPTC. Contact email: paper@ipptc.org.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Cheng, H., Yu, G.C.: The present status of distillation technology and its trend to development. Chem. Eng. 29(1), 52–55 (2001)
Cheng, H., Zhou, M., Yu, G.C.: Recent development of enhancement of gas-liquid mass transfer. Prog. Chem. 13(4), 315–322 (2001)
Qin, L., Jin, H.B., Yang, S.H.: Effect of sieve plates structure on hydrodynamic parameters in multistage bubble column reactor. Chem. Eng. 38(9), 15–18 (2010)
Liu, Y., Liu, J.P., Miao, Y.L., et al.: Cause analysis and optimization of PVC dry tail gas scrubbing tower. China Chlor-Alkali 7, 21–22 (2017)
Xu, M.: Modification on scrubber stray in coal gasification plant. Large Scale Nitrogenous Fertilizer Ind. 41(2), 132–136 (2018)
Wang, X.B., Lu, Y.G., Liu, Z.Z.: Analysis on blockage problem of recycle oil heat exchanger in the delayed coking unit and improvement measures. Sci. Technol. Chem. Ind. 22(3), 52–55 (2014)
Zhang, J.J., Wang, Y.F., Mao, X.J., et al.: Performance characteristics of two-phase direct contact condensation on dual-flow tray. Chem. Eng. 43(8), 38–43 (2015)
Gao, Y.R., Liu, Y.G., Huang, J.: New drop-in cross-flow shower tray application. Nitrogenous Fertilizer Technol. 32(2), 52–54 (2013)
Xu, J.N., Pi, Y., Li, Q.S., et al.: Study and application of highly efficient flow guided sieve tray and BHSII type packing. Chem. Ind. Eng. Prog. 24(7), 800–804 (2005)
Li, Q.S., Guo, F., Zhang, W.L., et al.: Research and industrial application of the high efficiency flow-guided sieve tray. Chem. Ind. Eng. 32(5), 1–7 (2015)
Tian, L.L., Wang, J.J., Gu, X.P., et al.: Advances in synthetic technology of organosilicon monomer. Mod. Chem. Ind. 24(12), 23–26 (2004)
Duan, J.H., Wang, W.J., Fan, J.L., et al.: Simulation and optimization of organosilicon monomer separation processes. Chem. Eng. 40(8), 69–73 (2012)
Li, J.L., Zhong, W.: Research progress of separation and purification of dimethyldichlorosilane. Chem. Ind. Eng. Prog., 89–94 (2011)
Wang, W.L., Wang, T.: Advances of synthetic methylchlorosilane technology in China. Silicone Mater. 22(1), 1–5 (2008)
Tang, Z.G., Wen, Y.M.: Progress of distillation technology in coking. Chem. Ind. Eng. Prog. 28(11), 1883–1889 (2009)
Sun, B.D., Xian, K.J., Li, M.Z.: Technology research of waste heat recovery and utilization. Energy Metall. Ind. 34(5), 44–47 (2015)
Ma, T.Z., Jiang Z.Y.: Heat pipe research and development in China. In: Proceedings of the International Heat Pipe Conference, Tsukuba (2002)
Zhang, Z., Yu, H.L., Yang, D.W.: Analysis on problems of deposited graphite in ascension pipe of coke oven during coke-oven gas heat recovery. Clean Coal Technol. 18(1), 79–81 (2012)
Acknowledgements
The project is supported by the transformation project of scientific and technological achievements of Qingdao (no. 16-6-2-50-nsh).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Dong, Jp., Wang, Ww., Guo, Xl., Li, Jl., Chen, Gh. (2020). Development of Combined Washing and Distillation Technology. In: Lin, J. (eds) Proceedings of the International Petroleum and Petrochemical Technology Conference 2019. IPPTC 2019. Springer, Singapore. https://doi.org/10.1007/978-981-15-0860-8_27
Download citation
DOI: https://doi.org/10.1007/978-981-15-0860-8_27
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0859-2
Online ISBN: 978-981-15-0860-8
eBook Packages: EnergyEnergy (R0)