Abstract
Tin (Sn) acts as an important role in the ageing behaviour of Al–Mg–Si alloy (6xxx series). In the present work the effect of micro-alloying of (0.04 wt% Sn) on the natural age hardening behaviour of Al–Mg–Si alloy is studied. Two alloy compositions of Al–1.2Mg–0.69Si and Al–1.2Mg–0.69Si–0.04Sn were prepared by casting process. Solution heat treatment of the two as-cast alloys was carried out at two different temperatures of 530 and 570 °C for 75 min followed by quenching in cold water at room temperature. The variation in the hardness with time for the alloys heat treated at different temperatures was recorded after post solutionising. Addition of 0.04 wt% Sn causes retardation in attaining peak hardness as compared to base alloy. Micro-alloying of Sn by 0.04 wt% in Al–Mg–Si alloy delayed in attaining the peak hardness value from 24 h (1 day) to 192 h (8 days).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Stulikova1, I., Faltus, J., Smola, B.: Influence of composition on natural ageing of Al-Mg-Si alloys. Kovove Mater. 45, 85–90 (2007)
Bryant, D.: The effects of preaging treatments on aging kinetics and mechanical properties in AA6111 aluminum autobody sheet. Metall. Mater. Trans. A 30 (1999)
Mohamed, A.M.A., Samuel, F.H., Doty, H.W., Valtierra, S.: Influence of tin addition on the microstructure and mechanical properties of Al-Si-Cu-Mg and Al-Si-Mg casting alloys. Metall. Mater. Trans. A 39, 490 (2008). https://doi.org/10.1007/s11661-007-9454-5
Silcock, J.M., Flower, H.M.: Comments on a comparison of early and recent work on the effect of trace additions of Cd, In, or Sn on nucleation and growth of θ′ in Al–Cu alloys. Scripta Mater. 46, 389 (2002). https://doi.org/10.1016/S1359-6462(02)00003-9
Shanghai, W., Tianping, Z., Haibo, H., JaeHwang, K., Equo, K., Tatsuo, S., Michael, H., Wei, G.: Effects of Pb/Sn additions on the age-hardening behaviour of Mg–4Zn alloys. Mater. Sci. Eng. A 597(12), 52–61 (2014). https://doi.org/10.1016/j.msea.2013.12.048
Yaoyao, W., Zhihong, J., Lipeng, D., Yanfeng, P., Yingying, L., Qing, L.: Effect of Ag and Cu additions on natural aging and precipitation hardening behavior in Al-Mg-Si alloys. J. Alloy. Compd. 695(25), 2444–2452 (2017). https://doi.org/10.1016/j.jallcom.2016.11.140
ASM Handbook: Heat Treating of Aluminium Alloy. ASM Handbook Committee, vol. 4, pp. 841–879 (1991). https://doi.org/10.1361/asmhba0001205
Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Curtin, W.A., Uggowitzer, P.J., Pogatscher, S.: Design strategy for controlled natural aging in AlMgSi alloys. Acta Mater. 118, 296–305 (2016). https://doi.org/10.1016/j.actamat.2016.07.048
Acknowledgements
The authors acknowledge the Department of Mechanical Engineering, IIT Guwahati, India for providing the micro-hardness facility. This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Baruah, M., Ladha, A., Baruah, M., Kar, A., Deb, A., Borah, A. (2020). A Study of Effect of Micro-alloying of Tin on Ageing Behaviour of 6xxx Series Aluminium Alloys. In: Biswal, B., Sarkar, B., Mahanta, P. (eds) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-0124-1_35
Download citation
DOI: https://doi.org/10.1007/978-981-15-0124-1_35
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0123-4
Online ISBN: 978-981-15-0124-1
eBook Packages: EngineeringEngineering (R0)