Safety Assessment of Damaged Structures

  • Jeom Kee PaikEmail author
Part of the Topics in Safety, Risk, Reliability and Quality book series (TSRQ, volume 37)


Structural systems suffer age-related degradation (e.g., corrosion wastage and fatigue cracking) and in-service damage (e.g., local denting) over time. Aging structures may also suffer various minor or moderate structural damage induced by accidents, such as collisions, grounding, fires, explosions, or the dropping of objects. The safety of damaged structures is lower than that of their original, intact states. Preventing such catastrophic failures requires robust design and engineering, regardless of whether the most unfavorable events associated with structural damage are confronted. In rescue and salvage operations, the safety of damaged structures should be sufficient. Structural safety must be assessed rapidly to establish the operation scheme. One criterion used to assess the safety of damaged structures is the amount of reduction in the maximum load-carrying capacity or the remaining ultimate strength. This is called residual strength. This chapter presents methods for predicting the residual ultimate strength of damaged structures using the diagram of the residual strength versus the damage index with an illustrative example for the safety of ships damaged by grounding accidents.


  1. 1.
    IMO (2000) SOLAS/2 recommended longitudinal strength, MSC.108(73). Maritime Safety Committee, International Maritime Organization, London, UKGoogle Scholar
  2. 2.
    IMO (2003) Revised interim guidelines for the approval of alternative methods of design and construction of oil tankers. Marine Environment Protection Committee of the Organization by Resolution MEPC 110(49), International Maritime Organization, London, UKGoogle Scholar
  3. 3.
    Paik JK (2018) Ultimate limit state analysis and design of plated structures, 2nd edn. Wiley, Chichester, UKCrossRefGoogle Scholar
  4. 4.
    Paik JK, Melchers RE (2008) Condition assessment of aged structures. CRC Press, New York, NY, USACrossRefGoogle Scholar
  5. 5.
    Paik JK, Kim DH, Park DH, Kim MS (2012) A new method for assessing the safety of ships damaged by grounding. Int J Maritime Eng 154(A1):1–20Google Scholar
  6. 6.
    Paik JK, Kim DK, Park DH, Kim HB, Mansour AE, Caldwell JB (2013) Modified Paik-Mansour formula for ultimate strength calculations of ship hulls. Ships Offshore Struct 8(3–4):245–260CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringUniversity College LondonLondonUK
  2. 2.The Korea Ship and Offshore Research Institute (Lloyd’s Register Foundation Research Centre of Excellence)Pusan National UniversityBusanKorea (Republic of)

Personalised recommendations