Advertisement

VCE Overpressure Prediction by CFD Modelling

  • Guowei MaEmail author
  • Yimiao Huang
  • Jingde Li
Chapter
  • 237 Downloads

Abstract

This chapter explores the mechanism of gas explosion and demonstrates its computational fluid dynamic (CFD) simulation procedure. The fundamental partial differential equations, which govern the fluid flow and other explosion processes employed in the numerical models for calculation of VCEs, are presented. FLACS is adopted for the evaluation of the potential VCEs in oil and gas industries. The CFD simulation theories in FLACS regarding the flame turbulence, geometry condition and fluid–obstacle interaction, etc., are discussed. The flow chart for the simulation procedure along with gas explosion examples is given.

References

  1. Abdelgayed, R. G., Bradley, D., & Lawes, M. (1987). Turbulent burning velocities—A general correlation in terms of straining rates. Proceedings of the Royal Society of London Series a-Mathematical Physical and Engineering Sciences, 414(1847), 389–413.  https://doi.org/10.1098/rspa.1987.0150.CrossRefGoogle Scholar
  2. Arntzen, B. J. (1998). Modelling of turbulence and combustion for simulation of gas explosions in complex geometries. (Ph.D.), The Norwegian University Norway.Google Scholar
  3. Bakke, J. R., & Hjertager, B. H. (1986). The effect of explosion venting in obstructed channels. In Modeling and simulation in engineering (pp. 237–241). Amsterdam: Elsevier Science Publication.Google Scholar
  4. Bjerketvedt, D., Bakke, J. R., & vanWingerden, K. (1997). Gas explosion handbook. Journal of Hazardous Materials, 52(1), 1–150.CrossRefGoogle Scholar
  5. Bray, K. N. C. (1990). Studies of the turbulent burning velocities. Proceedings of the Royal Society of London, Series A: Mathematical and Physical Sciences, 431, 315–335.CrossRefGoogle Scholar
  6. Ferrara, G., Di Benedetto, A., Salzano, E., & Russo, G. (2006). CFD analysis of gas explosions vented through relief pipes. Journal of Hazardous Materials, 137(2), 654–665.  https://doi.org/10.1016/j.jhazmat.2006.03.037.CrossRefGoogle Scholar
  7. Hjertager, B. H. (1982). Simulation of transient compressible turbulent reactive flows. Composites science and Technology, 27, 159–170.Google Scholar
  8. Hjertager, B. H. (1984). Computer-simulation of turbulent reactive gas-dynamics. Modeling Identification and Control, 5(4), 211–236.CrossRefGoogle Scholar
  9. Hjertager, B. H. (1993). Computer modeling of turbulent gas-explosions in complex 2d and 3d geometries. Journal of Hazardous Materials, 34(2), 173–197.  https://doi.org/10.1016/0304-3894(93)85004-X.CrossRefGoogle Scholar
  10. Kee, R. J., Miller, J. A., & Jefferson, T. H. (1980). CHEMKIN: A general purpose, problem-independent, chemical kinetics code package. Sandia report, SAND80-8003, Livermore, California 94551.Google Scholar
  11. Kee, R. J. (1987). The Chemkin thermodynamic data base. Sandia report, SAND87-8215B. UC-4, Livermore, California 94551.Google Scholar
  12. Kuchta, J. M. (1985), Investigation of fire and explosion accidents in the chemical, mining and fuel-related industries—A manual. United States Department of the interior, Bureau of Mines, Bulletin 680.Google Scholar
  13. Kuo, K. K. (1986). Principles of combustion. New York: Wiley.Google Scholar
  14. Launder, B. E., & Spalding, D. B. (1974). The numerical computation of the turbulent flows. Computer Methods in Applied Mechanics and Engineering, 3, 269–289.CrossRefGoogle Scholar
  15. NTS. (2001). Risk and emergency preparedness analysis, NORSOK STANDARD in Z-013, Rev. 2, 2001-09-01, Norway.Google Scholar
  16. Patankar, S. V. (1980). Numerical heat transfer and fluid flow. London: Hemisphere Publishing corporation.zbMATHGoogle Scholar
  17. Patankar, S. V. (1981). A calculation procedure for two-dimensional elliptic situations. Numerical Heat Transfer, 4(4), 409–425.CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.School of Civil and Transportation EngineeringHebei University of TechnologyTianjinChina
  2. 2.Department of Civil, Environmental and Mining Engineering, School of EngineeringUniversity of Western AustraliaPerthAustralia
  3. 3.Centre for Infrastructural Monitoring and ProtectionCurtin UniversityPerthAustralia

Personalised recommendations