Abstract
The presence of discontinuities such as cracks and faults in porous media can remarkably impact the fluid pressure distribution. This is due to considerable contrast between hydraulic properties of porous matrix and discontinuity. Several numerical techniques have been adopted to simulate the behaviour of fractured porous media subjected to fluid flow mostly in the context of discrete fracture-matrix models. Current approaches still have several shortcomings, namely in terms of computational costs from a large number of additional degrees of freedom used to capture the discontinuities, and the implementation of special integration procedures. The present work proposes a new technique to model fluid flow in saturated fractured porous media based on coupling finite elements to enable embedding the preferential paths of flow created by discontinuities in regular meshes. The discretisation of fracture and porous medium does not need to conform and the meshes are coupled without additional degrees of freedom. Two numerical examples are presented to assess the performance of the new method in comparison with other techniques available in the literature.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adler PM, Thovert J-F, Mourzenko VV (2012) Fractured porous media. Oxford University Press, Oxford, UK, p 175
Andersson J, Dverstorp B (1987) Conditional simulations of fluid flow in three-dimensional networks of discrete fractures. Water Resour Res 23(10):1876–1886
Barenblatt G, Zheltov IP, Kochina I (1960) Basic concepts in the theory of seepage of homogeneous liquids in fissured rocks [strata]. J Appl Math Mech 24(5):1286–1303
Bitencourt LAG Jr, Manzoli OL, Prazeres PG, Rodrigues EA, Bittencourt TN (2015) A coupling technique for non-matching finite element meshes. Comput Methods Appl Mech Eng 290:19–44
Bogdanov I, Mourzenko V, Thovert J-F, Adler P (2003) Two-phase flow through fractured porous media. Phys Rev E 68(2):1–24
Boone TJ, Ingraffea AR (1990) A numerical procedure for simulation of hydraulically-driven fracture propagation in poroelastic media. Int J Numer Anal Meth Geomech 14(1):27–47
D’Angelo C, Scotti A (2012) A mixed finite element method for Darcy flow in fractured porous media with non-matching grids. ESAIM Math Model Numer Anal 46(2):465–489
Flemisch B, Fumagalli A, Scotti A (2016) A review of the XFEM-based approximation of flow in fractured porous media. Adv Discretization Methods 47–76
Helmig R (1997) Multiphase flow and transport processes in the subsurface: a contribution to the modeling of hydrosystems. Springer, Berlin Heidelberg, Berlin, Germany, p 367
Huang H, Long TA, Wan J, Brown WP (2011) On the use of enriched finite element method to model subsurface features in porous media flow problems. Comput Geosci 15(4):721–736
Jackson CP, Hoch AR, Todman S (2000) Self consistency of a heterogeneous continuum porous medium representation of a fractured medium. Water Resour Res 36(1):189–202
Lamb AR (2011) Coupled deformation, fluid flow and fracture propagation in porous media, Ph.D. thesis, Department of Earth Science and Engineering, Imperial College, UK, 197 pp
Liu F, Zhao L-Q, Liu P-L, Luo Z-F, Li N-Y, Wang P-S (2015) An extended finite element model for fluid flow in fractured porous media. Math Probl Eng 2015:1–10
Long J, Remer J, Wilson C, Witherspoon P (1982) Porous media equivalents for networks of discontinuous fractures. Water Resour Res 18(3):645–658
Martin V, Jaffré J, Roberts JE (2005) Modeling fractures and barriers as interfaces for flow in porous media. SIAM J Sci Comput 26(5):1667–1691
Moench AF (1984) Double-porosity models for a fissured groundwater reservoir with fracture skin. Water Resour Res 20(7):831–846
Muskat M (1937) The flow of fluids through porous media. J Appl Phys 8(4):274–282
Schwenck N, Flemisch B, Helmig R, Wohlmuth BI (2015) Dimensionally reduced flow models in fractured porous media: crossings and boundaries. Comput Geosci 19(6):1219–1230
Segura J, Carol I (2004) On zero-thickness interface elements for diffusion problems. Int J Numer Anal Meth Geomech 28(9):947–962
Sudicky E, McLaren R (1992) The Laplace transform Galerkin technique for large-scale simulation of mass transport in discretely fractured porous formations. Water Resour Res 28(2):499–514
Whitaker S (1966) The equations of motion in porous media. Chem Eng Sci 21(3):291–300
Witherspoon PA, Wang JS, Iwai K, Gale JE (1980) Validity of cubic law for fluid flow in a deformable rock fracture. Water Resour Res 16(6):1016–1024
Woodbury A, Zhang K (2001) Lanczos method for the solution of groundwater flow in discretely fractured porous media. Adv Water Resour 24(6):621–630
Zimmerman RW, Chen G, Hadgu T, Bodvarsson GS (1993) A numerical dual-porosity model with semianalytical treatment of fracture/matrix flow. Water Resour Res 29(7):2127–2137
Acknowledgements
The authors would like to acknowledge the support from the Australian Research Council through its Discovery Early Career Researcher Award (DE150101703) and ARC Projects (DP170104192), and from the School of Civil Engineering at The University of Sydney. The third and fourth authors acknowledge the support from Petrobras S/A.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Vafajou, B., Dias-Da-Costa, D., Bitencourt, L.A.G., Manzoli, O.L. (2020). Coupling Finite Elements for Modelling Fluid Flow in Fractured Porous Media. In: Wang, C., Ho, J., Kitipornchai, S. (eds) ACMSM25. Lecture Notes in Civil Engineering, vol 37. Springer, Singapore. https://doi.org/10.1007/978-981-13-7603-0_36
Download citation
DOI: https://doi.org/10.1007/978-981-13-7603-0_36
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-7602-3
Online ISBN: 978-981-13-7603-0
eBook Packages: EngineeringEngineering (R0)