Abstract
Current manufacturing industries use a high amount of cutting fluids in order to increase the machining rates and achieve higher productivity. A huge amount of cutting fluid is used in the manufacturing processes involving metal removal processes. But the negative impacts also increase with the increased amount the utilization of cutting fluids. Occupational diseases also increase when workers work in close contact with the cutting fluid. The workers are the worst affected because they are prone to inhale the mist generated. A new cutting fluid was developed from vegetable oils and was tested for emulsion stability. After that, the performance was compared with two different conventional fluids at a varying flow rate of cutting fluid.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Brinksmeier E, Meyer D, Huesmann-Cordes AG, Herrmann C (2015) Metalworking fluids—mechanisms and performance. CIRP Ann Manuf Technol 64(2):605–628
Isik Y (2010) An experimental investigation on effect of cutting fluids in turning with coated carbides tool. J Mech Eng 56(3):195–201
Anthony Xavior M, Adithan M (2009) Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel. J Mater Process Technol 209:900–909
Debnath S, Reddy MM, Yi QS (2014) Environmental friendly cutting fluids and cooling techniques in machining: a review. J Clean Product 83:33–47
Hamdan A, Sarhan AA, Hamdi M (2012) An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. Int J Adv Manuf Technol 58(1):81–91
Lawal SA, Abolarin MS, Ugheoke BI, Onche EO (2007) Performance evaluation of cutting fluids developed from fixed oils. Leonardo Electron J Pract Technol 10:137–144
Prabhu MV, Ponnusamy P, Kumar, JS, Performance of various cutting fluids by estimating surface roughness of mild steel in turning
Onuoha OJ, Abu JO, Lawal SA, Mudiare E, Adeyemi MB (2016) Determining the effect of cutting fluids on surface roughness in turning AISI 1330 alloy steel using Taguchi method. Mod Mech Eng 5(2):51–59
Shashidhara YM, Jayaram SR (2012) Tribological studies on AISI 1040 with raw and modified versions of Pongam and Jatropha vegetable oils as lubricants. Adv Tribol
Elmunafi MH, Kurniawan D, Noordin MY (2015) Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant. Procedia CIRP 26:408–411
Khan MMA, Mithu MAH, Dhar NR (2009) Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid. J Mater Process Technol 209(15):5573–5583
Paul PS, Varadarajan AS, Gnanadurai RR (2016) Study on the influence of fluid application parameters on tool vibration and cutting performance during turning of hardened steel. Eng Sci Technol Int J 19(1):241–253
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Agrawal, N., Katna, R. (2019). Assessment of Cutting Forces in Machining with Novel Neem Oil-Based Cutting Fluid. In: Mishra, S., Sood, Y., Tomar, A. (eds) Applications of Computing, Automation and Wireless Systems in Electrical Engineering. Lecture Notes in Electrical Engineering, vol 553. Springer, Singapore. https://doi.org/10.1007/978-981-13-6772-4_74
Download citation
DOI: https://doi.org/10.1007/978-981-13-6772-4_74
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6771-7
Online ISBN: 978-981-13-6772-4
eBook Packages: EngineeringEngineering (R0)