Study of the Influence of Styrene-Acrylic Emulsion for Advanced Calligraphy Paper Performance

  • Xiaoxiu HaoEmail author
  • Ziyu Xing
  • Tong Wang
  • Changhong Liu
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 543)


On the basis of cooked rice paper coated with a good ink-absorbing and no ink paint, the advanced calligraphy paper uses cooked rice paper as the body paper. This thesis sets styrene-acrylic emulsion as binder, porcelain clay and zinc oxide as pigments. Firstly, it discusses effect on the performance of senior calligraphy paper writing caused by the two kinds of pigment preparation in different proportion and adhesion-filling ratio of different coating. Secondly, it implores the impact of different coatings on paper performance, such as tear, tensile strength, smoothness, and gloss. The result shows that when the styrene acrylic emulsion used as binder, ink absorption increased gradually with the increase of adhesion-filling ratio; tear, tension and gloss increased with the increase of clay and the decrease of zinc oxide, the decrease of smoothness; when the porcelain clay: zinc oxide is 2:3 and adhesion-filling ratio is 1:4.5, the whiteness, smoothness, and gloss of the Xuan paper are significantly enhanced after coating of the sample. The ink is not scattered during writing, the lines are neat, delicate, unbreakable, no ink paint, dense and bright surface, and with good writing performance.


PiMade Xuan paper Xuan paper coating Advanced calligraphy paper 


  1. 1.
    Zhu, J. (2013). The characteristics, application and innovation of Chinese Xuan paper. Journal of Taizhou Polytechnic College, 05, 22–24.Google Scholar
  2. 2.
    Cao, T. (2012). One hundred years in research on Chinese Xuan paper. Journal of Hefei Normal University, 01, 45–56.Google Scholar
  3. 3.
    Liu, R. (2015). Xuan paper science knowledge question and answer (part 2). Paper and Paper Making, 12, 94–98.Google Scholar
  4. 4.
    Zhang, L. (2015). Synthesis and research of core-shell styrene-acrylic emulsion through reactive emulsifier. Hunan University.Google Scholar
  5. 5.
    Qiao, L., Cao, Jin, Rui, S., Liu, B., & Shen, G. (2015). Application of SAE emulsion on paper relics and its anti-aging performance. Paper and Paper Making, 10, 40–43.Google Scholar
  6. 6.
    Gao, T., & An, Q. (2014). Preparation of organosilicone-modified styrene-acrylate emulsion and its application on surface sizing. Paper and Paper Making, 04, 33–38.Google Scholar
  7. 7.
    Xiaolong, F., Zhang, G., Li, J., & Guixia, W. (2014). Preparation and characterization of soap-free styrene-acrylate emulsion surface sizing agent. Paper and Paper Making, 01, 40–44.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Xiaoxiu Hao
    • 1
    Email author
  • Ziyu Xing
    • 1
    • 2
  • Tong Wang
    • 1
    • 2
  • Changhong Liu
    • 1
    • 2
  1. 1.Tianjin Vocational InstituteTianjinChina
  2. 2.Tianjin University of Science and TechnologyTianjinChina

Personalised recommendations