Advertisement

Research on Water Retention Characteristics and Pore Size Distribution of Landfilled Municipal Solid Waste

  • Wenjie ZhangEmail author
  • Lu Lv
Conference paper
Part of the Environmental Science and Engineering book series (ESE)

Abstract

Soil-water characteristic curve (SWCC) is used to describe the relation between water content and matric suction in porous media, and reflects to some extent the pore size distribution. However, a complete SWCC of municipal solid waste (MSW) is difficult to achieve by direct measurement because of the existence of macropores. For this reason, SWCCs of the matrix region in MSW were measured by a pressure plate extractor, and SWCCs of the macropore region were determined from water breakthrough tests in this paper. Water retention characteristics and pore size distribution of MSW were analyzed based on the complete SWCC. The results show that the residual water contents of municipal solid waste were high. Field capacity of shallow, middle and deep waste were 38.5%, 42.2% and 46.8%, respectively, corresponding to a matric suction range of 3–8 kPa. As the depth and age increase, the effective water content interval and specific yield decrease. Taking 1-kPa matric suction as a limit, pores in MSW can be divided into macropores and micropores. The probability density function of pore radius is bimodal. As the depth increase, the amount of macropores and their radius decrease, and the amount of micropores increases with the average pore size becomes smaller.

Keywords

Landfilled municipal solid waste Water retention characteristics Dual-porosity Macropore Soil-water characteristic curve 

Notes

Acknowledgments

This research was supported by National Natural Science Foundation of China (Nos. 51478256 and 41772300).

References

  1. Burger CA, Shackelford CD (2001) Evaluating dual porosity of pelletized diatomaceous earth using bimodal soil water characteristic cure functions. Can Geotech J 38:53–66CrossRefGoogle Scholar
  2. Chen Y-m et al (2011) Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Technical code for geotechnical engineering of municipal solid waste sanitary landfills (CJJ176-2011). China Architecture and Building Press, Beijing (in Chinese)Google Scholar
  3. Ehrig H-J (1983) Quality and quantity of sanitary landfill leachate. Waste Manag Res 1:53–68CrossRefGoogle Scholar
  4. Fellner J, Brunner PH (2010) Modeling of leachate generation from MSW landfills by a 2-dimensional 2-domain approach. Waste Manag 30:2084–2095CrossRefGoogle Scholar
  5. Fredlund DG, Rahardjo H (1993) Soil mechanics for unsaturated soils. Wiley, New YorkCrossRefGoogle Scholar
  6. Qian XD, Koerner RM, Gray DH (2002) Geotechnical aspects of landfill design and construction. Prentice-Hall Inc, Upper Saddle RiverGoogle Scholar
  7. Radulovich R, Solorzano E, Sollins P (1989) Soil macropore size distribution from water breakthrough curves. Soil Sci Soc Am J 53:556–559CrossRefGoogle Scholar
  8. Uguccioni M, Zeiss C (1997) Comparison of two approaches to modeling moisture movement through municipal solid waste. J Environ Sys 25:4–63Google Scholar
  9. Van Genuchten MT (1980) A closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 4:892–898CrossRefGoogle Scholar
  10. Wu H, Wang H, Zhao Y et al (2012) Evolution of unsaturated hydraulic properties of municipal solid waste with landfill depth and age. Waste Manag 32:463–470CrossRefGoogle Scholar
  11. Zhang L, Chen Q (2005) Predicting bimodal soil water characteristic curves. J Geotech Geoenviron 131:666–670CrossRefGoogle Scholar
  12. Zhang W-J, Zhang G-g, Chen Y-m (2013) Analyses on a high leachate mound in a landfill of municipal solid waste in China. Environ Earth Sci 70:1747–1752CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Civil EngineeringShanghai UniversityShanghaiChina

Personalised recommendations