Advertisement

High Efficiency Current-Fed Dual Active Bridge DC–DC Converter with ZVS Achievement Throughout Full Range of Load Using Optimized Switching Patterns

  • Deshang Sha
  • Guo Xu
Chapter
Part of the CPSS Power Electronics Series book series (CPSS)

Abstract

For current-fed dual active bridge bidirectional DC–DC converters, all the possible switching patterns are summarized in view of the combinations of both side PWM duty cycles and phase shift angle. A control strategy is proposed for the current-fed dual active bridge converter to operate with the optimized patterns. The equivalent duty cycle of the secondary side is smaller than that of the primary side by a fixed value, which is optimized based on the soft switching achievement and the circulating current minimization. The closed-loop control is easy to be implemented since there are only two independent variables, one-side duty cycle and the phase shift angle. With the proposed control, zero-voltage switching (ZVS) can be achieved for all power switches throughout full range of load even at no load condition. The typical working modes with the proposed control are given. The optimal design of the system parameters including the fixed time delta and dead time is illustrated. The effectiveness of the proposed control is verified by the experimental results of a 1 kW laboratory prototype.

Keywords

Bidirectional DC–DC converter PWM control ZVS Battery charging/discharging Circulation loss 

References

  1. 1.
    Xu D, Zhao C, Fan H (2004) A PWM plus phase-shift control bidirectional DC-DC converter. IEEE Trans Power Electron 19(3):666–675CrossRefGoogle Scholar
  2. 2.
    Xiao H, Xie S (2008) A ZVS bidirectional DC-DC converter with phase shift plus PWM control scheme. IEEE Trans Power Electron 23(2):813–823MathSciNetCrossRefGoogle Scholar
  3. 3.
    Li W, Wu H, Yu H, He X (2011) Isolated winding-coupled bidirectional ZVS converter with PWM plus phase-shift (PPS) control strategy. IEEE Trans Power Electron 26(12):3560–3570CrossRefGoogle Scholar
  4. 4.
    Shi Y, Li R, Xue Y, Li H (2015) Optimized operation of current-fed dual active bridge DC-DC converter for PV applications. IEEE Trans Ind Electron 62(11):6986–6995CrossRefGoogle Scholar
  5. 5.
    Sha D, You F, Wang X (2016) A high efficiency current fed semi dual active bridge DC-DC converter for low input voltage applications. IEEE Trans Ind Electron 63(4):2155–2164Google Scholar
  6. 6.
    Ding Z, Yang C, Zhang Z, Wang C, Xie S (2014) A novel soft-switching multiport bidirectional DC–DC converter for hybrid energy storage system. IEEE Trans Power Electron 29(4):1595–1609CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Advanced Power Conversion Center, School of AutomationBeijing Institute of TechnologyBeijingChina

Personalised recommendations