High Temperature Creep Behavior and Fracture Characteristics of a 2%Ru Nickel Based Single Crystal Superalloy

Conference paper

Abstract

The creep behavior and fracture characteristics of a new type of 2%Ru nickel base single crystal superalloy was studied through measurement of creep properties and microstructure observation. The results show that the alloy has good creep properties at 1070–1100 °C and 127–147 MPa. The apparent activation energy of creep is: Q = 416.8 kJ/mol and the stress index n is: n = 4.67 at the steady creep stage. The deformation mechanism of alloy in the steady state of creep is that the dislocation slip in the matrix and climb over the γ′ phase in the matrix, and the dislocation can be cut into the γ′ phase in the late stage of creep. Under high temperature and low stress, the γ′ phase of the alloy can form raft structure, and the crack initiation at the interface between the raft γ′ phase and the matrix phase. With the crack propagation, aggregation and connectivity, the creep resistance of the alloy decreases sharply, which eventually leads to creep rupture of the alloy.

Keywords

Ru Superalloy Creep Fracture Dislocation 

Notes

Acknowledgements

Sponsorship of this research by the Natural Science Foundation of China under grant no. 51271125 is gratefully acknowledged.

References

  1. 1.
    Monajati H, Jahazi M, Bahrami R. The influence of heat treatment conditions on γ′ characteristics in Udimet 720. Materials Science and Engineering A, 373(1–2) (2004) 286–293.Google Scholar
  2. 2.
    Jesser W A, Zhang B W. Formation energy of ternary alloy systems calculated by an extended miedema model. Physica B, 315(1) (2002) 123–132.Google Scholar
  3. 3.
    Diologent F, Caron P, Jacques A, et al. The γ′/γ mismatch in Ni based superalloys: In situ measurements during creep test. Nuclear Instruments and Methods in Physics Research Section B, 200(4) (2002) 346–351.Google Scholar
  4. 4.
    Knowles M D, Hunt D W. The influence of microstructure and environment on the crack growth behavior of powder metallurgy nickel superalloy RR1000. Metallurgical and Materials Transaction A, 33(10) (2002) 3165–3172.Google Scholar
  5. 5.
    Unocic R R, Viswanathan G B, Sarosi P M, et al. Mechanisms of creep deformation in polycrystalline Ni-base disk superalloys. Materials Science and Engineering A, 483–484(4) (2008) 25–32.Google Scholar
  6. 6.
    Raujiol S, Pettinari F, Locq D, et al. Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy. Materials Science and Engineering A, 387–389(2) (2004) 678–682.Google Scholar
  7. 7.
    Lu Z Z, Liu C L, Yue Z F. Probabilistic safe analysis of the working life of a powder metallurgical turbine disc. Materials Science and Engineering A, 395(1–2) (2005) 153–159.Google Scholar
  8. 8.
    Kovarik L, Unocic R R, Li J, et al. The intermediate temperature deformation of Ni-based superalloys: importance of reordering. Journal of Metals, 61(2) (2009) 42–48.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Shuang Liang
    • 1
    • 2
  • Sugui Tian
    • 1
  • Zhixin Liu
    • 1
    • 2
  • Delong Shu
    • 1
  1. 1.Shenyang University of TechnologyShenyangChina
  2. 2.Yingkou Institute of TechnologyYingkouChina

Personalised recommendations