Advertisement

Oxidation and Hot Corrosion Behavior of Inconel 740H Alloy at High Temperature

  • Kunjie Luo
  • Chengtao Li
  • Fei Xue
  • Yan Liu
  • Lu Zhang
  • Guodong Zhang
Conference paper

Abstract

The high temperature oxidation and high temperature sulfuration behavior of Inconel 740H alloy were studied by field emission scanning electron microscope (FESEM) and other equipments. The results show that the surface film formed by high temperature sulfuration of 740H alloy was looser and easier to fall off compared to surface film formed by high temperature oxidation. The oxide film obtained by high temperature oxidation contained two layers. The outer one was mainly composed of Cr2O3 and Ti2O3 phase, while the inner one was mainly composed of Al2O3 phase. The surface film obtained by high temperature sulfuration contained three layers. The outer one was mainly composed of Cr2O3 and Ti2O3 phase, the inner one was mainly composed of S and Cr compounds, and the middle one was mainly composed of inner oxide Al2O3. The depth of internal sulfuration zone increases as sulfuration temperature rises.

Keywords

Inconel 740H alloy High temperature oxidation High temperature sulfuration 

References

  1. 1.
    Tao Zhang, Liting Hao, Feng Tian, et al. Research Progress on High Temperature Materials for 700°C Ultra-Supercritical Coal-Fired Unit[J]. Materials for Mechanical Engineering, 40(2) (2016) 1–6.Google Scholar
  2. 2.
    Chengyu Chi, Hongyao Yu, Xishan Xie. Critical High Temperature Materials for 700°C A-USC Power Plants [J]. World Iron & Steel, 13(2) (2013) 42–63.Google Scholar
  3. 3.
    Jianxiong Mao. Latest Development of High Temperature Metallic Materials in 700 °C Ultra-Supercritical Units [J]. Electric Power Construction, 34(8) (2013) 69–76.Google Scholar
  4. 4.
    R. Viswanathan, W.T. Bakker. Materials for Boilers in Ultra-Supercritical Power Plants [A]. Proceedings of 2000 International Joint Power Generation Conference[C]. Miami Beach, Florida, 2000.Google Scholar
  5. 5.
    S.B. Gosia, M.F. Diana, M. JÖrg, et al. Nickel-Base Superalloys for Ultra-Supercritical Coal-Fired Power Plants: Fireside Corrosion. Laboratory Studies and Power Plant Exposures [J]. Fuel, 108 (2013) 521.Google Scholar
  6. 6.
    Ping Li, Peng Qin, Jie Zhao, et al. Hot Corrosion Behavior of Super304H Coated Na2SO4-25% NaCl Film [J]. Journal of Materials Engineering, 44(2) (2016) 69-74.Google Scholar
  7. 7.
    Ping Li, Anna Li, Shengjiao Pang, et al. Research on Behavior of HR3C to Resist High Temperature Sulfate Corrosion[J]. Journal of Dalian University of Technology, 53(5) (2013) 685–688.Google Scholar
  8. 8.
    Jiang Li, Rongcan Zhou, Liying Tang, et al. Fireside Corrosion Behavior of HR3C Steel in Simulated Coal-Fired Boiler Atmospheres with High Sulfur Concentration[J]. Thermal Power Generation, 45(1) (2016) 70–75.Google Scholar
  9. 9.
    Jintao Lu, Yuefeng Gu, Zhen Yang. Coal Ash Induced Corrosion of Three Candidate Materials for Superheater Boiler Tubes of Advanced Ultra-Supercritical Power Station [J]. Corrosion Science and Protection Technology, 4(3) (2014) 205–210.Google Scholar
  10. 10.
    T. Hussain, A.U. Syed, N.J. Simms. Trends in Fire-side Corrosion Damage to Superheaters in Air and Oxy-Firing of Coal/Biomass [J]. Fuel, 113(6) (2013) 787–797.Google Scholar
  11. 11.
    A.U. Syed, N.J. Simms, J.E. Oakey. Fireside Corrosion of Superheaters: Effects of Air and Oxy-Firing of Coal and Biomass [J]. Fuel, 101(2) (2012) 62–73.Google Scholar
  12. 12.
    Y. Shinata. Accelerated Oxidation Rate of Chromium Induced by Sodium Chloride[J]. Oxidation of Metals. 27(5/6) (1987) 315–332.Google Scholar
  13. 13.
    C J Wang, J S Lin. The Oxidation of MAR M247 Superalloy with Na2SO4 Coating[J]. Materials Chemistry and Physics, 76 (2002) 123–129.Google Scholar
  14. 14.
    Ping Yu. Effect of Active Element Y on High Temperature Corrosion Behavior of Sputtering K38 Nano-Crystal [D]. Tianjin University.Google Scholar
  15. 15.
    Xudong Lu, Sugui Tian, Tao Chen, et al. Internal Oxidation and Internal Sulfuration of Ni-Base Alloy with High Cr Content during Hot Corrosion in Molten Sulfate[J]. Rare Metal Materials and Engineering, 43 (2014) 79–84.Google Scholar
  16. 16.
    Tiepan Li. Metal High Temperature Oxidation and Hot Corrosion [M]. Chemical Industry Press. 2003.Google Scholar
  17. 17.
    Yangtao Xu, Tiandong Xia, Jianqiang Yan. Effect of Alloying Elements to Hot Corrosion Behavior of Novel Co-Al-W Superalloy[J]. Journal of Chinese Society for Corrosion and Protection, 30 (2010) 457–464.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Kunjie Luo
    • 1
  • Chengtao Li
    • 1
  • Fei Xue
    • 1
  • Yan Liu
    • 1
  • Lu Zhang
    • 1
  • Guodong Zhang
    • 1
  1. 1.Suzhou Nuclear Power Research InstituteSuzhouChina

Personalised recommendations