Abstract
Optical surface monitoring systems (OSMSs) are designed to assist patient setup and patient motion management during radiotherapy treatments. Systems use projected and reflected patterns of coloured light on the patients surface and therefore depend on the skin’s optical absorbance and reflectance properties, which can vary with surface shape and colour. This study aimed to identify optimal operating parameters for the Catalyst HD OSMS (C-rad, Uppsala, Sweden) when used to monitor the surfaces of 3D-printed objects with various convex and concave surfaces, one of which was painted in six different colours with various levels of red and black saturation (from light pink to dark grey). The degree of surface detection was assessed via the Catalyst HD interface, with different levels of gain (100–600%) and signal integration time (1–7 ms). The OSMS was able to detect horizontal and convex shapes more consistently than vertical or steeply angled surfaces. The OSMS was not able to detect the darkest surface at all, even with the highest gain and the longest integration times. Mid-grey surfaces were detectable only when the integration time was increased to 2 s. All pink surfaces were easily detectable at the shortest integration time, with the OSMS performing best when red saturation was highest. Further work is recommended, as the red undertone of all human skin may lead to improved results for real patients. However, these preliminary results indicate that careful commissioning and optimisation of OSMS systems may be required before they can be used in radiotherapy treatments for a broad patient cohort.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bert, C., Metheany, K.G., Doppke, K., Chen, G.T.: A phantom evaluation of a stereo-vision surface imaging system for radiotherapy patient setup. Med. Phys. 32(9), 2753–2762 (2005). https://doi.org/10.1118/1.1984263
Li, G., Ballangrud, A., Kuo, L.C., et al.: Motion monitoring for cranial frameless stereotactic radiosurgery using video-based three-dimensional optical surface imaging. Med. Phys. 38(7), 3981–3994 (2011). https://doi.org/10.1118/1.3596526
Mancosu, P., Fogliata, A., Stravato, A., et al.: Accuracy evaluation of the optical surface monitoring system on EDGE linear accelerator in a phantom study. Med. Dos. 41(2), 173–179 (2016). https://doi.org/10.1016/j.meddos.2015.12.003
Wen, N., Li, H., Song, K., et al.: Characteristics of a novel treatment system for linear acceleratorbased stereotactic radiosurgery. J. Appl. Clin. Med. Phys. 16(4), 125–148 (2015). https://doi.org/10.1120/jacmp.v16i4.5313
Cerviño, L.I., Detorie, N., Taylor, M., et al.: Initial clinical experience with a frameless and maskless stereotactic radiosurgery treatment. Pract. Radiat. Oncol. 2(1), 54–62 (2012). https://doi.org/10.1016/j.prro.2011.04.005
Schönecker, S., Walter, F., Freislederer, P., et al.: Treatment planning and evaluation of gated radiotherapy in left-sided breast cancer patients using the Catalyst TM/Sentinel TM system for deep inspiration breath-hold (DIBH). Radiat. Oncol. 11, 143 (2016). https://doi.org/10.1186/s13014-016-0716-5
Stieler, F., Wenz, F., Shi, M., Lohr, F.: A novel surface imaging system for patient positioning and surveillance during radiotherapy. Strahlenther. Onkol. 189(11), 938–944 (2013). https://doi.org/10.1007/s00066-013-0441-z
Lempart, M., Kügele, M., Snäll, J., et al.: Development of a novel radiotherapy motion phantom using a stepper motor driver circuit and evaluation using optical surface scanning. Australas. Phys. Eng. Sci. Med. 40(3), 717–727 (2017). https://doi.org/10.1007/s13246-017-0556-0
Anderson, R.R., Parrish, J.A.: The optics of human skin. J. Investig. Dermatol. 77(1), 13–19 (1981). https://doi.org/10.1111/1523-1747.ep12479191
Kairn, T., Crowe, S.B., Markwell, T.: Use of 3D printed materials as tissue-equivalent phantoms. IFMBE Proc. 51, 728–731 (2015). https://doi.org/10.1007/978-3-319-19387-8_179
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Ethics declarations
The authors declare that they have no conflict of interest. This article does not contain any studies with human participants or animals performed by any of the authors.
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Milewski, C., Peet, S., Sylvander, S., Crowe, S., Kairn, T. (2019). Optimising a Radiotherapy Optical Surface Monitoring System to Account for the Effects of Patient Skin Contour and Skin Colour. In: Lhotska, L., Sukupova, L., Lacković, I., Ibbott, G. (eds) World Congress on Medical Physics and Biomedical Engineering 2018. IFMBE Proceedings, vol 68/3. Springer, Singapore. https://doi.org/10.1007/978-981-10-9023-3_81
Download citation
DOI: https://doi.org/10.1007/978-981-10-9023-3_81
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-9022-6
Online ISBN: 978-981-10-9023-3
eBook Packages: EngineeringEngineering (R0)