Abstract
One of the easiest and the most appropriate solution for fabricating MEMS switch is Electrostatic actuation. However, it requires large parallel plates which can take a large surface on the substrate wafer and thus an expensive fabrication cost. In this paper, an improved electrostatic MEMS switch is presented. The proposed design is carried out so that it minimizes the dimensions of the MEMS device. Simulation results are also done by COMSOL based on the proposed design.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Sinha N, Jones T, Guo Z, Piazza G (2010) Demonstration of low voltage and functionally complete logic operations using body-biased complementary and ultra-thin ALN piezoelectric mechanical switches. In: 2010 IEEE 23rd international conference on micro electro mechanical systems (MEMS), IEEE, pp 751–754
Akarvardar K, Eggimann C, Tsamados D, Chauhan YS, Wan GC, Ionescu AM, … Wong HSP (2008) Analytical modeling of the suspended-gate FET and design insights for low-power logic. IEEE Trans Electr Dev 55(1):48–59
Akarvardar K, Elata D, Parsa R, Wan GC, Yoo K, Provine J, … Wong HS (2007) Design considerations for complementary nanoelectromechanical logic gates. In: Electron devices meeting, IEDM 2007, IEEE international, IEEE, pp 299–302
Tabib-Azar M, Venumbaka SR, Alzoubi K, Saab D (2010) 1 volt, 1 GHz NEMS switches. In: Sensors, 2010 IEEE, IEEE, pp 1424–1426
Nathanael R, Pott V, Kam H, Jeon J, Liu TJK (2009) 4-terminal relay technology for complementary logic. In: Electron devices meeting (IEDM), 2009 IEEE international, IEEE, pp 1–4
Alzoubi K, Saab DG, Tabib-Azar M (2010) Circuit simulation for nano-electro-mechanical switches VLSI circuits. In: 2010 53rd IEEE international midwest symposium on circuits and systems (MWSCAS), IEEE, pp 1177–1180
Chakraborty S, Chaudhuri AR, Bhattacharyya TK (2009) Design and analysis of MEMS cantilever based binary logic inverter. In: International conference on advances in computing, control and telecommunication technologies, ACT’09, pp 184–188
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Bahmanyaran, A., Jafari, K. (2019). Electrostatic MEMS Switch with Vertical Beams and Body Biasing. In: Montaser Kouhsari, S. (eds) Fundamental Research in Electrical Engineering. Lecture Notes in Electrical Engineering, vol 480. Springer, Singapore. https://doi.org/10.1007/978-981-10-8672-4_78
Download citation
DOI: https://doi.org/10.1007/978-981-10-8672-4_78
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8671-7
Online ISBN: 978-981-10-8672-4
eBook Packages: EngineeringEngineering (R0)