Advertisement

Extraction of Phosphorus from Dephosphorization Slag

  • Takaiku Yamamoto
  • Masashi Nakamoto
Chapter

Abstract

In Japan, steelmaking slag is one of the most important secondary phosphorus (P) resources. The annual amount of P removed into steelmaking slag (c. 114 kt P/a) is approximately 2.8 times more than that of P imported as phosphate (Pi) rock to Japan. Increasing attention has been paid to P recovery from dephosphorization slag for mitigating the Japan’s dependency on P import. This chapter describes the smelting reduction technology for extracting P from dephosphorization slag into iron. The potential of this technology has been examined using a pilot-scale test furnace having the capacity to treat dephosphorizing slag at 2 t/day. P could be extracted from dephosphorization slag, forming Fe-P alloy with the P content of approximately 10 wt%.

Keywords

Dephosphorization slag Smelting reduction process P extraction Fe-P alloy 

References

  1. Inoue R, Nakamoto M, Pahlevani F, Yamamoto T, Kitamura S, Ariyama T (2012) Proceedings of 5th international congress on science and technology of steelmaking, Dresden, Germany. CD-ROMGoogle Scholar
  2. Matsubae K, Kubo Y, Yamasue H, Nagasaka T (2014) J Environ Conserv Eng 43:79Google Scholar
  3. Scholz RW, Roy AH, Brand FS, Hellums DT, Ulrich AE (2014) Sustainable phosphorus managementGoogle Scholar
  4. Slag Atlas (1995) 2nd ed, p 105. Verlag Stahleisen GmbH, DüsseldorfGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Takaiku Yamamoto
    • 1
  • Masashi Nakamoto
    • 2
  1. 1.Kyoto UniversityKyotoJapan
  2. 2.Osaka-UniversitySiutaJapan

Personalised recommendations