Generalized Transmission-Distribution Coordination Model

  • Zhengshuo LiEmail author
Part of the Springer Theses book series (Springer Theses)


An integrated T-D power system, also known as a “global power system”, is shown in Fig. 2.1. As was discussed in Chap.  1, the TPS and the DPS are separately managed by a TCC and a DCC whose operational responsibilities are heterogeneous in that: (1) the TCC manages the voltages of the boundary bus while the DCC controls the power injections at the boundary bus, and (2) the TCC, which is usually interconnected with multiple DCCs, should also be in charge of the power balance and stability of the entire T-D system.


Boundary Buses Global Power System Complex Power Injection Slave Subsystem Master Subsystem 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    Sun HB, Zhang BM, Xiang ND (1998) Global power flow calculation. Part 1: model and method. Power Syst Technol 22(12):41–44 (in Chinese)Google Scholar
  2. 2.
    Sun HB, Zhang BM, Xiang ND et al (1999) Global power flow calculation. Part 2: convergence, practical algorithm and numerical test. Power Syst Technol 23(1):50–53 (in Chinese)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Tsinghua-Berkeley Shenzhen InstituteTsinghua UniversityShenzhenChina

Personalised recommendations