Advertisement

Theoretical Models for Measuring Residual Stress by Nanoindentation Method

Chapter

Abstract

Generally, there are two ways that nanoindentation technique can be used to determine the surface residual stresses. One is based on the influence of residual stress on the P-h curve of nanoindentation.

References

  1. 1.
    Zhu LN, Xu BS, Wang HD, et al. Measurement of residual stresses using nanoindentation method. Crit Rev Solid State Mater Sci. 2015;40:77–89.CrossRefGoogle Scholar
  2. 2.
    Zhu LN, Xu BS, Wang HD, et al. Effect of residual stress on the nanoindentation response of (100) copper single crystal. Mater Chem Phys. 2012;136:561–5.CrossRefGoogle Scholar
  3. 3.
    Khan MK, Fitzpatrick ME, Hainsworth SV, et al. Effect of residual stress on the nanoindentation response of aerospace aluminium alloys. Comput Mater Sci. 2011;50:2967–76.CrossRefGoogle Scholar
  4. 4.
    Xu ZH, Li X. Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation. Acta Mater. 2005;53:1913–9.CrossRefGoogle Scholar
  5. 5.
    Zhu LN, Research on residual stresses of coatings by nanoindentation technology (in Chinese). Doctoral dissertation. Beijing: China University of Geosciences; 2014.Google Scholar
  6. 6.
    Lee YH, Kwon D. Measurement of residual-stress effect by nanoindentation on elastically strained (100) W. Scripta Mater. 2003;49:459–65.CrossRefGoogle Scholar
  7. 7.
    Giannakopoulos AE, Suresh S. Determination of elastoplastic properties by instrumented sharp indentation. Scripta Mater. 1999;40(10):1191–8.CrossRefGoogle Scholar
  8. 8.
    Bolshakov A, Pharr GM. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J Mater Res. 1998;13:1049–58.CrossRefGoogle Scholar
  9. 9.
    Tsui TY, Oliver WC, Pharr GM. Influences of stress on the measurement of mechanical properties using nanoindentation. J Mater Res. 1996;11(3):760–8.CrossRefGoogle Scholar
  10. 10.
    Bolshakov A, Oliver WC, Pharr GM. Influences of stress on the measurement of mechanical properties using nanoindentation finite element simulation. J Mater Res. 1996;11(3):752–9.CrossRefGoogle Scholar
  11. 11.
    Suresh S, Giannakopoulos AE. A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater. 1998;46(16):5755–67.CrossRefGoogle Scholar
  12. 12.
    Lee YH, Kwon D. Estimation of biaxial surface stress by instrumented indentation with sharp indenters. Acta Mater. 2003;52:1553–63.Google Scholar
  13. 13.
    Xu ZH, Li X. Estimation of residual stresses from elastic recovery of nanoindentation. Phil Mag. 2006;86(19):2835–46.CrossRefGoogle Scholar
  14. 14.
    Swadener JG, Taljat B, Pharr GM. Measurement of residual stress by load and depth sensing indentation with spherical indenters. J Mater Res. 2001;16(7):2091–102.CrossRefGoogle Scholar
  15. 15.
    Yen CY, Jian SR, Lai YS, et al. Mechanical properties of the hexagonal HoMnO3 thin films by nanoindentation. J Alloy Compd. 2010;508:523–7.CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. and Science Press 2018

Authors and Affiliations

  1. 1.National Key Laboratory for RemanufacturingAcademy of Armored Forces EngineeringBeijingChina
  2. 2.China University of GeosciencesBeijingChina

Personalised recommendations