Advertisement

Principle and Methods of Nanoindentation Test

Chapter

Abstract

Indentation test is a simple and effective method in the assessment of mechanical properties of materials and has widely been adopted in the latest century. Indentation technique evaluates the mechanical properties of materials by driving an indenter into the material surface and subsequently imaging the impression. Indentation test was firstly used for the measurement of hardness. A hard object with certain shape and size is used as indenter and indented into the tested material under certain pressure keeping for a while before unloaded. Then the hardness of the tested material can be determined from the relationship between the total indentation load and displacement or area. Based on the principle above, there are many traditional methods of hardness testing, such as Vickers hardness method (Vickers), Knoop hardness method (Knoop), and Rockwell hardness method (Rockwell).

Keywords

Nanoindentation Tests Vickers Hardness Method Wedge-shaped Indenter Indented Cylinder Super Thin Film 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–83.CrossRefGoogle Scholar
  2. 2.
    Kese KO, Li ZC. Semi-ellipse method for accounting for the pile-up contact area during nanoindentation with the Berkovich indenter. Scripta Mater. 2006;55:699–702.CrossRefGoogle Scholar
  3. 3.
    Kese KO, Li ZC, Bergman B. Influence of residual stress on elastic modulus and hardness of soda-lime glass measured by nanoindentation. J Mater Res. 2004;19(10):3109–19.CrossRefGoogle Scholar
  4. 4.
    Zhou L, Yao YX, Shahjada AP. Residual area maximum depth model of indentation size effect of nanoindentation hardness. J Chin Ceram Soc. 2005;33(7):817–21.Google Scholar
  5. 5.
    Bolshakov A, Oliver WC, Pharr GM. Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations. J Mater Res. 1996;11(3):760–8.CrossRefGoogle Scholar
  6. 6.
    Ling L, Long S, Ma Z, et al. Numerical study on the effects of equi-biaxial residual stress on mechanical properties of nickel film by means of nanoindentation. J Mater Sci Technol. 2010;26(11):1001–5.CrossRefGoogle Scholar
  7. 7.
    Taljat B, Pharr GM. Development of pile-up during spherical indentation of elastic–plastic solids. Int J Solids Struct. 2004;41:3891–904.CrossRefGoogle Scholar
  8. 8.
    Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19(1):3–20.CrossRefGoogle Scholar
  9. 9.
    Zhang TH. Micro/Nano mechanical testing technology and its application (in Chinese). Beijing: China Machine Press; 2005.Google Scholar
  10. 10.
    Tuck JR, Korsunsky AM, Bull SJ, Davidson RI, et al. On the application of the work-of-indentation approach to depth-sensing indentation experiments in coated systems. Surf Coat Technol. 2001;137:217–24.CrossRefGoogle Scholar
  11. 11.
    Fischer-Cripps AC. Nanoindentation. New York: Springer-Verlag; 2002.CrossRefGoogle Scholar
  12. 12.
    Gao Y. The basic course of advanced measuring instruments for materials (in Chinese). Beijing: Tsinghua University Press; 2008.Google Scholar
  13. 13.
    Gao XY. In situ characterization of mechanical properties of carbon fiber/epoxy composites by nanoindentation (in Chinese). Master Thesis. Beijing: Beijing University of Technology, 2012.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. and Science Press 2018

Authors and Affiliations

  1. 1.National Key Laboratory for RemanufacturingAcademy of Armored Forces EngineeringBeijingChina
  2. 2.China University of GeosciencesBeijingChina

Personalised recommendations